Help! I killed my 3210 :o( - GSM-Forum

marmus · 08-31-2001, 14:56

Hi all!

I flashed my 3210 with GreEns Nokia Flasher Shell v1.0 and used full3210-536.fls file.

Now when I start upp my 3210 it only appears CONTACT SERVICE on the display.

Can anobody help me?

With regards,

Marmus nauru@hotmail.com

Neo's · 08-31-2001, 16:10

you you make a full flash before flash, if yes try to flash it on the phone, and try again to flash the partial flash.

if not try only to flash the partial again maybe it work

zizo · 08-31-2001, 17:19

Marmus: You should have taken a "copy" on your phone before the flash, cause if u got any problem.

**Freestyler2000** · 09-02-2001, 01:16

Hi Marmus. If you flash your phone with same MCU softvare version it will be OK - start address 00200000, end address 002F0000 (use buck up without PPM file). If only this is the problem the phone should start. Otherwise there are two possibilities: 1. Incorrect check sum in EEPROM. 2. Hardware fault (in most cases broken ball on COBBA)

Regards Daniel

08-31-2001, 14:56	#1 (permalink)
marmus Junior Member Join Date: Aug 2001 Location: Sweden Posts: 2 Member: 6071 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Help! I killed my 3210 :o( Hi all! I flashed my 3210 with GreEns Nokia Flasher Shell v1.0 and used full3210-536.fls file. Now when I start upp my 3210 it only appears CONTACT SERVICE on the display. Can anobody help me? With regards, Marmus<br />nauru@hotmail.com

09-02-2001, 01:16	#4 (permalink)
Freestyler2000 Product Manager Join Date: Dec 2000 Location: UK Posts: 727 Member: 2868 Status: Offline Thanks: 92 Thanked 514 Times in 60 Posts	Hi Marmus.<br />If you flash your phone with same MCU softvare version it will be OK - start address 00200000, end address 002F0000 (use buck up without PPM file).<br />If only this is the problem the phone should start.<br />Otherwise there are two possibilities:<br />1. Incorrect check sum in EEPROM.<br />2. Hardware fault (in most cases broken ball on COBBA) Regards<br />Daniel

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
help ive killed my u8380	Rab622	LG	17	05-04-2006 15:56
Please Help ! I kill my Nokia 7110 v4.88 !!	Ved	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	10	03-25-2002 23:15
dejan box killed my 3210,,,help!	hanoon	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	02-03-2002 13:35
Help i ****ed my 3210	enduro	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	07-24-2001 17:07
Help,I've killed my GA628 !	robb.79	Old Ericsson Phones & Sony Phones	4	07-24-2001 11:11

08-31-2001, 16:10	#2 (permalink)
Neo's Freak Poster Join Date: Apr 2001 Location: Switzerland Age: 35 Posts: 290 Member: 4172 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	you you make a full flash before flash, if yes try to flash it on the phone, and try again to flash the partial flash. if not try only to flash the partial again maybe it work

08-31-2001, 17:19	#3 (permalink)
zizo Freak Poster Join Date: Nov 2000 Location: Sweden Posts: 273 Member: 2628 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Marmus: You should have taken a "copy" on your phone before the flash, cause if u got any problem.