Hi!! 3310 Insert Sim. Plzzz Help. - GSM-Forum

shoeb7 · 04-23-2006, 18:45

Hi! U All Experts, This Cell Was Having Network Problem ,while Searching Manually Din't Selct The Network, So I Have Done Servicing By Dipping In The Chemical Call Elma And Then Dried The Pcb..( Thought After This I Replace The Ant Swtch)
But After This When I Inserted The Sim It Shows Insert Sim Card On The Display.. I Checked The Sim Try, Reflow The Ics But The Same Problem. Plzzzzzz Help This Mobile Belongs To My Boss. Plzzzz Help Plzzzzzzzzzzzzzzzz.

paulfagaras · 05-15-2006, 22:09

reball ccont
regards

sayas · 05-17-2006, 15:40

WHat is all this about ??? :S

sunny_9d · 05-31-2006, 17:20

Check SIM card. Find a 3310 service manual and read there about SIM troubleshooting. There may be a short due to solder remaining on the PCB. Also check all the resistors, caps, and tracks associated with the SIM interface.

moncef · 06-02-2006, 13:54

it s 100% sim card is not powered by ccont try to give power to sim card to pin six from bat+ or onother source of power

rakker18 · 06-02-2006, 22:56

open line from ur box or u nid to reprogram the unit
r

bond95 · 06-02-2006, 23:43

Use the solutions and tray check your lines bro ...

jaycoy · 06-04-2006, 11:01

Quote:

Originally Posted by shoeb7

Hi! U All Experts, This Cell Was Having Network Problem ,while Searching Manually Din't Selct The Network, So I Have Done Servicing By Dipping In The Chemical Call Elma And Then Dried The Pcb..( Thought After This I Replace The Ant Swtch)
But After This When I Inserted The Sim It Shows Insert Sim Card On The Display.. I Checked The Sim Try, Reflow The Ics But The Same Problem. Plzzzzzz Help This Mobile Belongs To My Boss. Plzzzz Help Plzzzzzzzzzzzzzzzz.

i might help you a little bit...just try this one..coz antena switch has no connection with it if you replace it right...try to re heat or reballs the power ic...if still insert sim appers try doing ckt trace....it may work...peace man...

nilesoft_eg · 06-04-2006, 16:14

change ccont ............................

04-23-2006, 18:45	#1 (permalink)
shoeb7 No Life Poster Join Date: Nov 2005 Location: india Age: 47 Posts: 859 Member: 196194 Status: Offline Thanks Meter: 47	Hi!! 3310 Insert Sim. Plzzz Help. Hi! U All Experts, This Cell Was Having Network Problem ,while Searching Manually Din't Selct The Network, So I Have Done Servicing By Dipping In The Chemical Call Elma And Then Dried The Pcb..( Thought After This I Replace The Ant Swtch) But After This When I Inserted The Sim It Shows Insert Sim Card On The Display.. I Checked The Sim Try, Reflow The Ics But The Same Problem. Plzzzzzz Help This Mobile Belongs To My Boss. Plzzzz Help Plzzzzzzzzzzzzzzzz.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hi! U All 3310 Insert Simcard Plzz Help	shoeb7	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	12-12-2008 06:46
3310 Insert Sim card with sim card in side	uwenk98	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-25-2003 17:28
3310 insert sim problem	unlockerbh	Nokia Hardware & Hardware Repair	2	01-28-2002 06:50
Nokia 3310 insert sim card then contact service.. Please help	DrMobile	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	12-11-2001 19:19
3310 insert sim after simcard insterted	ARC	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-29-2001 16:54

05-15-2006, 22:09	#2 (permalink)
paulfagaras Freak Poster Join Date: Jul 2004 Age: 47 Posts: 179 Member: 74061 Status: Offline Thanks Meter: 1	reball ccont regards

05-17-2006, 15:40	#3 (permalink)
sayas Temporary banned !! Join Date: May 2006 Location: Buenos Aires, Argentina Posts: 192 Member: 277973 Status: Offline Thanks Meter: 1	WHat is all this about ??? :S

05-31-2006, 17:20	#4 (permalink)
sunny_9d Junior Member Join Date: Apr 2006 Posts: 31 Member: 255726 Status: Offline Thanks Meter: 6	Check SIM card. Find a 3310 service manual and read there about SIM troubleshooting. There may be a short due to solder remaining on the PCB. Also check all the resistors, caps, and tracks associated with the SIM interface.

06-02-2006, 13:54	#5 (permalink)
moncef Freak Poster Join Date: Aug 2004 Location: tunisia bardo Age: 48 Posts: 127 Member: 78368 Status: Offline Thanks Meter: 1	it s 100% sim card is not powered by ccont try to give power to sim card to pin six from bat+ or onother source of power

06-02-2006, 22:56	#6 (permalink)
rakker18 Junior Member Join Date: Jun 2006 Posts: 31 Member: 286457 Status: Offline Thanks Meter: 1	open line from ur box or u nid to reprogram the unit r

06-04-2006, 16:14	#9 (permalink)
nilesoft_eg Freak Poster Join Date: Apr 2004 Age: 43 Posts: 118 Member: 62321 Status: Offline Thanks Meter: 35	change ccont ............................