hlp plz nokia 3310 dont accept any flash file(phone not accept preloder code) - GSM-Forum

wissamkoko · 06-06-2004, 10:08

hi all i have nokia 3310 phone when i start it it works for 2second the phone restart and messege contact service appear on screen i used eprom tool and test my phone and it cannot read mcu and ppm so i think ita a software problem but when i tried to flah my phone a messge(nhm-5 phone cannot accept preloder code ) knowing that im using latest rollis flahers software thxxxxx

alexchairman · 06-06-2004, 10:41

use eeprom tools v 3.1

wissamkoko · 06-06-2004, 10:57

i usecd eprom tool 3.1 and when i run test it gives me that the reason for contact servic is that there is a bad check sum for ncu rom and ppm check sum ,im trying to flash my phone with a full new flash but the phoes doesnt accept it at all

sergo_zmeia · 06-06-2004, 12:50

Try to change flash chip firs..than flash FUBU..
Good luck!
Big8

GSM SNIPER · 06-07-2004, 15:39

Try to clean the baord with thinner and rehot It with hot air (400°C) for 20 second and reflash IT . It will be OK !!!

D2NICE · 06-07-2004, 15:51

Quote:

Originally Posted by wissamkoko

hi all i have nokia 3310 phone when i start it it works for 2second the phone restart and messege contact service appear on screen i used eprom tool and test my phone and it cannot read mcu and ppm so i think ita a software problem but when i tried to flah my phone a messge(nhm-5 phone cannot accept preloder code ) knowing that im using latest rollis flahers software thxxxxx

you may need loader

but,
noktool18 is most helpful to your problem

kissdmiss · 06-08-2004, 08:19

check whether its a m28w160ct flash. if it is then change the flash to m28w160bt and flash.

jim_tmt · 06-08-2004, 11:56

trust me change cobba ic,than reprograme the hold mcu n ppm

wissamkoko · 06-14-2004, 16:16

thxxxx all problem solved i change flash chip and phone back to life thxxxxxxxxx 2alllll

06-06-2004, 10:08	#1 (permalink)
wissamkoko Junior Member Join Date: Sep 2001 Location: lebanon Posts: 12 Member: 6164 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	hlp plz nokia 3310 dont accept any flash file(phone not accept preloder code) hi all i have nokia 3310 phone when i start it it works for 2second the phone restart and messege contact service appear on screen i used eprom tool and test my phone and it cannot read mcu and ppm so i think ita a software problem but when i tried to flah my phone a messge(nhm-5 phone cannot accept preloder code ) knowing that im using latest rollis flahers software thxxxxx

06-06-2004, 12:50	#4 (permalink)
sergo_zmeia Freak Poster Join Date: Jun 2003 Location: Bulgaria Age: 37 Posts: 471 Member: 32284 Status: Offline Thanks: 0 Thanked 4 Times in 4 Posts	Hi! Try to change flash chip firs..than flash FUBU.. Good luck! Big8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
dead K750i,don't accept any flash	vreality	Sony Ericsson	8	12-13-2007 21:38
d900i not accepting any flash	jet2006	UST Pro II	0	10-08-2007 10:41
hlp plz nokia 6610 screen light is always on !!	wissamkoko	Nokia Hardware & Hardware-Repair Area	1	04-01-2004 08:15
hlp plz nokia 6610 screen light is always on !!	wissamkoko	Nokia Digital Core Technology 4 ( DCT-4 )	0	03-31-2004 13:17
nokia 3310 dont recognize simcards	crossings	Nokia Hardware & Hardware-Repair Area	9	12-17-2002 13:20

06-06-2004, 10:41	#2 (permalink)
alexchairman Freak Poster Join Date: May 2004 Location: INDIA Age: 35 Posts: 222 Member: 67260 Status: Offline Thanks: 14 Thanked 137 Times in 35 Posts	use eeprom tools v 3.1

06-06-2004, 10:57	#3 (permalink)
wissamkoko Junior Member Join Date: Sep 2001 Location: lebanon Posts: 12 Member: 6164 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	i usecd eprom tool 3.1 and when i run test it gives me that the reason for contact servic is that there is a bad check sum for ncu rom and ppm check sum ,im trying to flash my phone with a full new flash but the phoes doesnt accept it at all

06-07-2004, 15:39	#5 (permalink)
GSM SNIPER No Life Poster Join Date: Apr 2003 Location: Bled lekhla Posts: 2,163 Member: 27291 Status: Offline Thanks: 827 Thanked 63 Times in 36 Posts	Try to clean the baord with thinner and rehot It with hot air (400°C) for 20 second and reflash IT . It will be OK !!!

06-08-2004, 08:19	#7 (permalink)
kissdmiss Junior Member Join Date: Apr 2004 Location: india-mumbai Age: 33 Posts: 28 Member: 63703 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	check whether its a m28w160ct flash. if it is then change the flash to m28w160bt and flash.

06-08-2004, 11:56	#8 (permalink)
jim_tmt Junior Member Join Date: Jun 2004 Age: 30 Posts: 3 Member: 68283 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	trust me change cobba ic,than reprograme the hold mcu n ppm

06-14-2004, 16:16	#9 (permalink)
wissamkoko Junior Member Join Date: Sep 2001 Location: lebanon Posts: 12 Member: 6164 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	thxxxx all problem solved i change flash chip and phone back to life thxxxxxxxxx 2alllll