How to flash 8810 - 00898890 - GSM-Forum

pinker_ · 03-03-2002, 03:40

Hi,

i don't know how to flash 8810 - 00898890?!?!!?

read flash -> atmel r/w(only) f_loader (2megz OK)
write flash-> ???

and not working this mobile with dejan(only read), windls, rolis, flashtool, knok(nse-6 - not supported model)!

thx

sorry for bad english

Lonegunman · 03-03-2002, 19:40

Are you saying you have made a flasher cable for the 8810 if so any chance you can make me one or send me how you did it as each time I have done one I have kiiled the phone (3 at last count and my service center is getting rich for me).

pinker_ · 03-03-2002, 20:41

The cable:
1 2 3 4
5 6 7 8

1-m2bus
2-fbus rx
3-fbus tx
4-gnd

work with dejan flasher (only read, only ATMEL R/W tia)

without battery, with nokia charger

Lonegunman · 03-03-2002, 21:13

Ok have been useing a battery not a charger so will try that if I get it done with send you file.

After a quick look at the flash chip on the board the file should be the normal one used in dark flasher. normal - Intel 28F160B3-B, size 16Mb that's about as close as I could find.

pinker_ · 03-03-2002, 21:40

yes, but not working with intel tiaz!!!

Lonegunman · 03-03-2002, 22:16

Can you do a back up from 00000000 to 00100000 and send to me as this has some info which may be of use to us.

pinker_ · 03-03-2002, 22:39

back up from 00000000 to 00100000 ???

or not 00200000 to 00400000 ???

try links(8810 v500):

00000000 to 00100000

00200000 to 00400000

Lonegunman · 03-03-2002, 23:54

Mail sent try it and let me know.

pinker · 03-04-2002, 00:20

[email protected]

pinker · 03-04-2002, 01:11

grrrrr
my phone is dead

aNy iDeAs?

Lonegunman · 03-04-2002, 01:13

Have you done the other loader?

pinker · 03-04-2002, 02:12

My phone is work!!!

Lonegunman · 03-06-2002, 07:50

Fixed? did it flash? can you send loaders to me.

thagangsta · 03-08-2002, 01:31

Quote:

Originally posted by pinker
My phone is work!!!

Ik have a 6210 with 00898890 flash, could you send me the flash and bootloader for it?

pinker · 03-08-2002, 05:10

8810work

BR,
pinker...

03-03-2002, 03:40	#1 (permalink)
pinker_ Junior Member Join Date: Sep 2001 Location: Hungary Posts: 13 Member: 6167 Status: Offline Thanks Meter: 0	How to flash 8810 - 00898890 ? Hi, i don't know how to flash 8810 - 00898890?!?!!? read flash -> atmel r/w(only) f_loader (2megz OK) write flash-> ??? and not working this mobile with dejan(only read), windls, rolis, flashtool, knok(nse-6 - not supported model)! thx sorry for bad english Last edited by pinker_; 03-03-2002 at 18:01.

03-03-2002, 21:13	#4 (permalink)
Lonegunman No Life Poster Join Date: Dec 2001 Location: London Age: 49 Posts: 792 Member: 7939 Status: Offline Thanks Meter: 2	Ok have been useing a battery not a charger so will try that if I get it done with send you file. After a quick look at the flash chip on the board the file should be the normal one used in dark flasher. normal - Intel 28F160B3-B, size 16Mb that's about as close as I could find. Last edited by Lonegunman; 03-03-2002 at 21:30.

03-03-2002, 22:39	#7 (permalink)
pinker_ Junior Member Join Date: Sep 2001 Location: Hungary Posts: 13 Member: 6167 Status: Offline Thanks Meter: 0	back up from 00000000 to 00100000 ??? or not 00200000 to 00400000 ??? try links(8810 v500): 00000000 to 00100000 00200000 to 00400000 Last edited by pinker_; 03-03-2002 at 22:46.

03-04-2002, 02:12	#12 (permalink)
pinker Freak Poster Join Date: Jul 2001 Location: HYPERCUBE Age: 58 Posts: 225 Member: 5116 Status: Offline Thanks Meter: 4	My phone is work!!! Last edited by pinker; 03-05-2002 at 06:44.

03-08-2002, 05:10	#15 (permalink)
pinker Freak Poster Join Date: Jul 2001 Location: HYPERCUBE Age: 58 Posts: 225 Member: 5116 Status: Offline Thanks Meter: 4	How to flash 8810 - 00898890 8810work BR, pinker...

03-03-2002, 19:40	#2 (permalink)
Lonegunman No Life Poster Join Date: Dec 2001 Location: London Age: 49 Posts: 792 Member: 7939 Status: Offline Thanks Meter: 2	Are you saying you have made a flasher cable for the 8810 if so any chance you can make me one or send me how you did it as each time I have done one I have kiiled the phone (3 at last count and my service center is getting rich for me).

03-03-2002, 20:41	#3 (permalink)
pinker_ Junior Member Join Date: Sep 2001 Location: Hungary Posts: 13 Member: 6167 Status: Offline Thanks Meter: 0	The cable: 1 2 3 4 5 6 7 8 1-m2bus 2-fbus rx 3-fbus tx 4-gnd work with dejan flasher (only read, only ATMEL R/W tia) without battery, with nokia charger

03-03-2002, 21:40	#5 (permalink)
pinker_ Junior Member Join Date: Sep 2001 Location: Hungary Posts: 13 Member: 6167 Status: Offline Thanks Meter: 0	yes, but not working with intel tiaz!!!

03-03-2002, 22:16	#6 (permalink)
Lonegunman No Life Poster Join Date: Dec 2001 Location: London Age: 49 Posts: 792 Member: 7939 Status: Offline Thanks Meter: 2	Can you do a back up from 00000000 to 00100000 and send to me as this has some info which may be of use to us.

03-03-2002, 23:54	#8 (permalink)
Lonegunman No Life Poster Join Date: Dec 2001 Location: London Age: 49 Posts: 792 Member: 7939 Status: Offline Thanks Meter: 2	Mail sent try it and let me know.

03-04-2002, 00:20	#9 (permalink)
pinker Freak Poster Join Date: Jul 2001 Location: HYPERCUBE Age: 58 Posts: 225 Member: 5116 Status: Offline Thanks Meter: 4	[email protected]

03-04-2002, 01:11	#10 (permalink)
pinker Freak Poster Join Date: Jul 2001 Location: HYPERCUBE Age: 58 Posts: 225 Member: 5116 Status: Offline Thanks Meter: 4	grrrrr my phone is dead aNy iDeAs?

03-04-2002, 01:13	#11 (permalink)
Lonegunman No Life Poster Join Date: Dec 2001 Location: London Age: 49 Posts: 792 Member: 7939 Status: Offline Thanks Meter: 2	Have you done the other loader?

03-06-2002, 07:50	#13 (permalink)
Lonegunman No Life Poster Join Date: Dec 2001 Location: London Age: 49 Posts: 792 Member: 7939 Status: Offline Thanks Meter: 2	Fixed? did it flash? can you send loaders to me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to flash 1st cpu & how to flash 2nd cpu	kasim	Infinity-Box	4	03-15-2008 11:09
how to flash 8810	Vigilius	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-26-2002 11:46
how to open 8810 ???	masterross	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-10-2001 22:55
How to unlock 8810?	Max Hash	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	05-11-2000 22:47