Minimum requirements? - GSM-Forum

Atlantis · 04-06-2002, 03:44

Hi!

I wonder how "low" I can go with hardware.

I'm planning to buy a laptop:
black and white LCD/486 33 Mhz/4Mb RAM/win 95

Is there any software that DON'T work with that config?
Planning to use it for flashing and unlocking and so on...

Happy for answers today..

/Atlantis

Atlantis · 04-06-2002, 20:48

anyone knows if avaliable software needs more than Black and white colors?

/Atlantis

djdunlock · 04-08-2002, 16:50

It doesn't matter what kind of monitor you use (wheter B/W or color), i think.
Attention, I have Notebook P166, 32 MB RAM, 2 GB HDD, but some soft doesn't work with it, special flashing (reading and writing EEPROM,...), so be careful, dont buy Notebook for unlocking and flashing, it needs Desktop PC (from P100>) and suite soft.
I have these experiences

skynet · 04-09-2002, 18:24

I have a P233MMX notebook, and everything works fine.

(but win95 may not be OK 'cause dejan hadn't work under it... then I installed win98 an' everything is OK)

ccwong · 08-27-2002, 12:30

hi,

i have a question:
i have a notebook Dell Latitude Pentium 3 running under Win98 and with 256MB of RAM.

I having problem when i try to read flash from my 8250 phone, the error asking me to check cable, contact, or phone model.

But, I did the samething on my 3310, everything OK?!
AND, I did the same phone 8250, same cable, on my DESKTOP PC, everything OK.

So, I believe it is not cable or phone or software or setting(i checked all configuration in bios and setup) problem.

I think it is my notebook problem....

Anyone encounter this problem, if yes, how can i solve it.?????

Please help.

NOTE: Anyone try flashing using Pentium 4 system (desktop or notebook) yet ?
Tz.

C.C.Wong

MDR · 08-27-2002, 14:15

just get a min Pentium 1 laptop..... but it has to have win95 at leats to run DOS mode and get a colored LCD....

GSM tools · 08-27-2002, 14:25

for dejan flasher you need at least P-133

AMIGAMEDIA · 08-30-2002, 20:17

Minimum requirements : Intel Pentium 200 MMX with 32 MB RAM.
Maximum requirements : Intel Pentium II or III with maximum CPU speed 300 Mhz (???!!!) why?

My experiences : Faid Calculator (using MBUS) not working at speed 350 Mhz or higher. so I have to down speed to 300Mhz and Faid Calculator Work 100% for N3310-3315-3330-3350, N8210.

But for AMD Processor K6-2/450Mhz there is no problem, Faid Calculator (using MBUS) work 100% for N3310-3315-3330-3350, N8210.

B.R

Hendut

Gee · 08-31-2002, 16:28

I use a Sony Vaio Lap Top 900MHZ and 10GB HD I use windows ME all the flashing and unlocking stuff works on it. My advice is to use a pc instead because Lap Top/Note books dont have that much Hard Drive space they come with Approx 15GB as most Pc's come with 20GB+ and you can always upgrade them were as top Top upgrades, well it's chepper to buy a new one than upgrade one.

Dave.W · 08-31-2002, 17:08

used to use dell P166 desktop, 32MB ram, 1GB HD; flashed all phones fine (in the days you had to flash to unlock!).
now use P233 desktop, 98MB ram, 3GB HD; no problems to date

Always used win98 with no problems (sometimes first edition sometimes second).
for flash files, get them on CD and copy to desktop when needed!

Allen · 09-01-2002, 07:18

Quote:

Originally posted by MDR
just get a min Pentium 1 laptop..... but it has to have win95 at leats to run DOS mode and get a colored LCD....

The least and minimum pc you can operate with your mobile phones, but for advance pc manupulation you can switch to PII - MMX...

REGards!

Williamcwy · 09-02-2002, 07:31

Hei, my laptop with P166, 32MB RAM also don't work for flashing, so better u buy minimum PII...

AMIGAMEDIA · 09-04-2002, 20:26

Hi ALL,

I have some problem, computer with high speed over 450 Mhz (P3 and P4) Faid Calculator (MBUS) not working.
Any idea or solutions?

B.R
Hendut

gsmsalers · 09-06-2002, 12:07

Hi to all.
Even on 4.86 almost all soft work.

04-06-2002, 03:44	#1 (permalink)
Atlantis Freak Poster Join Date: Feb 2002 Location: SWEDEN Age: 46 Posts: 156 Member: 9740 Status: Offline Thanks Meter: 1	Minimum requirements? Hi! I wonder how "low" I can go with hardware. I'm planning to buy a laptop: black and white LCD/486 33 Mhz/4Mb RAM/win 95 Is there any software that DON'T work with that config? Planning to use it for flashing and unlocking and so on... Happy for answers today.. /Atlantis Last edited by Atlantis; 04-06-2002 at 04:08.

04-06-2002, 20:48	#2 (permalink)
Atlantis Freak Poster Join Date: Feb 2002 Location: SWEDEN Age: 46 Posts: 156 Member: 9740 Status: Offline Thanks Meter: 1	hoho anyone knows if avaliable software needs more than Black and white colors? /Atlantis

08-27-2002, 12:30	#5 (permalink)
ccwong Junior Member Join Date: Jun 2002 Age: 48 Posts: 24 Member: 12899 Status: Offline Thanks Meter: 0	Rolis DCT3 problem with Pentium3??? hi, i have a question: i have a notebook Dell Latitude Pentium 3 running under Win98 and with 256MB of RAM. I having problem when i try to read flash from my 8250 phone, the error asking me to check cable, contact, or phone model. But, I did the samething on my 3310, everything OK?! AND, I did the same phone 8250, same cable, on my DESKTOP PC, everything OK. So, I believe it is not cable or phone or software or setting(i checked all configuration in bios and setup) problem. I think it is my notebook problem.... Anyone encounter this problem, if yes, how can i solve it.????? Please help. NOTE: Anyone try flashing using Pentium 4 system (desktop or notebook) yet ? Tz. C.C.Wong

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What are the minimum requirements for its use?	d_veras	Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...)	1	08-15-2009 16:47
Minimum PC requirements for PBB (win2k?)	GoGy	Phoenix Black Box	0	06-12-2005 18:40
DCT-4 FLASHER dongle package at 70$ Each minimum 5 pcs	Superjune	Main Sales Section	0	11-01-2002 20:02
Where to get minimum 50 MB free space at FTP?upload/download......	Abe	Off Topic Zone	0	09-11-2002 03:51
NOKIA PPM&MCU v.1.05 sale on lot of 10 pieces minimum !!!!	sixkiller666	Main Sales Section	0	01-12-2002 23:53

04-08-2002, 16:50	#3 (permalink)
djdunlock No Life Poster Join Date: Jul 2001 Location: East Europe Age: 54 Posts: 918 Member: 5452 Status: Offline Thanks Meter: 1	It doesn't matter what kind of monitor you use (wheter B/W or color), i think. Attention, I have Notebook P166, 32 MB RAM, 2 GB HDD, but some soft doesn't work with it, special flashing (reading and writing EEPROM,...), so be careful, dont buy Notebook for unlocking and flashing, it needs Desktop PC (from P100>) and suite soft. I have these experiences

04-09-2002, 18:24	#4 (permalink)
skynet Insane Poster Join Date: Apr 2002 Location: Planet Earth Age: 44 Posts: 79 Member: 10630 Status: Offline Thanks Meter: 1	I have a P233MMX notebook, and everything works fine. (but win95 may not be OK 'cause dejan hadn't work under it... then I installed win98 an' everything is OK)

08-27-2002, 14:15	#6 (permalink)
MDR No Life Poster Join Date: Apr 2000 Location: Philippines Posts: 555 Member: 1272 Status: Offline Thanks Meter: 3	just get a min Pentium 1 laptop..... but it has to have win95 at leats to run DOS mode and get a colored LCD....

08-27-2002, 14:25	#7 (permalink)
GSM tools No Life Poster Join Date: Jun 2002 Location: Czech republic Age: 43 Posts: 667 Member: 12813 Status: Offline Thanks Meter: 20	for dejan flasher you need at least P-133

08-30-2002, 20:17	#8 (permalink)
AMIGAMEDIA Insane Poster Join Date: Apr 2002 Location: INDONESIA Age: 61 Posts: 80 Member: 10843 Status: Offline Thanks Meter: 0	Minimum requirements : Intel Pentium 200 MMX with 32 MB RAM. Maximum requirements : Intel Pentium II or III with maximum CPU speed 300 Mhz (???!!!) why? My experiences : Faid Calculator (using MBUS) not working at speed 350 Mhz or higher. so I have to down speed to 300Mhz and Faid Calculator Work 100% for N3310-3315-3330-3350, N8210. But for AMD Processor K6-2/450Mhz there is no problem, Faid Calculator (using MBUS) work 100% for N3310-3315-3330-3350, N8210. B.R Hendut

08-31-2002, 16:28	#9 (permalink)
Gee Freak Poster Join Date: May 2002 Location: At Home Posts: 290 Member: 11829 Status: Offline Thanks Meter: 1	I use a Sony Vaio Lap Top 900MHZ and 10GB HD I use windows ME all the flashing and unlocking stuff works on it. My advice is to use a pc instead because Lap Top/Note books dont have that much Hard Drive space they come with Approx 15GB as most Pc's come with 20GB+ and you can always upgrade them were as top Top upgrades, well it's chepper to buy a new one than upgrade one.

08-31-2002, 17:08	#10 (permalink)
Dave.W No Life Poster Join Date: Nov 2001 Location: England Age: 41 Posts: 2,821 Member: 7653 Status: Offline Thanks Meter: 823	used to use dell P166 desktop, 32MB ram, 1GB HD; flashed all phones fine (in the days you had to flash to unlock!). now use P233 desktop, 98MB ram, 3GB HD; no problems to date Always used win98 with no problems (sometimes first edition sometimes second). for flash files, get them on CD and copy to desktop when needed!

09-02-2002, 07:31	#12 (permalink)
Williamcwy Freak Poster Join Date: Jan 2002 Location: Malaysia Age: 47 Posts: 239 Member: 8898 Status: Offline Thanks Meter: 1	Hei, my laptop with P166, 32MB RAM also don't work for flashing, so better u buy minimum PII...

09-04-2002, 20:26	#13 (permalink)
AMIGAMEDIA Insane Poster Join Date: Apr 2002 Location: INDONESIA Age: 61 Posts: 80 Member: 10843 Status: Offline Thanks Meter: 0	Hi ALL, I have some problem, computer with high speed over 450 Mhz (P3 and P4) Faid Calculator (MBUS) not working. Any idea or solutions? B.R Hendut

09-06-2002, 12:07	#14 (permalink)
gsmsalers No Life Poster Join Date: Apr 2002 Location: Flash Age: 44 Posts: 1,943 Member: 11208 Status: Offline Thanks Meter: 11	Hi to all. Even on 4.86 almost all soft work.