N6210 V5.36 can't be read by nk_cal - GSM-Forum

vuquan · 04-14-2002, 17:41

Hi,
Anybody know, please teach me!
I use DarkFlasherSell 3 to backup my N6210 before upgrade it. I have a MBUS (DAU-9P) cable only (no Flasher cable).
I run the DFS3 first, chose the New Backup menu, chose the 6210 phone, press flash button. The nk_cal screen apears. I press F1 key to read the phone, key in the range (00200000 - 00600000) and press Enter but the software answers: The phone not respon Tx=0
I don't know why. I did not use the flasher cable? or I did not chose the right Boot Loader and Flasher Loader? Please tell me the name of the BootLoader and FlasherLoader file or the Alias ID of the Nokia 6210.
Thank you very much!
quan
[email protected]

mudboy · 04-14-2002, 22:51

You cant read and write flash memory of the phone with MBUS cable.
You have to make Flasher cable and you can use flasher 1.00b after it.
If you have MBUS cable only,you can use only nk_calc from DFS:-(
regards

vuquan · 04-16-2002, 18:09

Thank you, Mudboy
Sorry my cable is FBUS (DAU-9P) and I have ever tried nk_calc from DFS, the nk_calc shown me that the phone was connected but I still can not read the phone. The reason is the cable? I have to get the MBUS? (If I use a cable only?)
Teach me, please!
vuquan

04-14-2002, 17:41	#1 (permalink)
vuquan Junior Member Join Date: Jun 2001 Location: Vietnam Posts: 23 Member: 5052 Status: Offline Thanks Meter: 0	N6210 V5.36 can't be read by nk_cal Hi, Anybody know, please teach me! I use DarkFlasherSell 3 to backup my N6210 before upgrade it. I have a MBUS (DAU-9P) cable only (no Flasher cable). I run the DFS3 first, chose the New Backup menu, chose the 6210 phone, press flash button. The nk_cal screen apears. I press F1 key to read the phone, key in the range (00200000 - 00600000) and press Enter but the software answers: The phone not respon Tx=0 I don't know why. I did not use the flasher cable? or I did not chose the right Boot Loader and Flasher Loader? Please tell me the name of the BootLoader and FlasherLoader file or the Alias ID of the Nokia 6210. Thank you very much! quan [email protected]

04-16-2002, 18:09	#3 (permalink)
vuquan Junior Member Join Date: Jun 2001 Location: Vietnam Posts: 23 Member: 5052 Status: Offline Thanks Meter: 0	Thank you, Mudboy Sorry my cable is FBUS (DAU-9P) and I have ever tried nk_calc from DFS, the nk_calc shown me that the phone was connected but I still can not read the phone. The reason is the cable? I have to get the MBUS? (If I use a cable only?) Teach me, please! vuquan Last edited by vuquan; 04-16-2002 at 18:13.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
s5600 can't be readed?? [SOLVED]	wildjoker	PolarBox 3	2	03-09-2010 18:37
Nokia 9300 document can't be read on E90	VEX-CELL	Nokia Hardware & Hardware Repair	0	08-29-2008 11:40
5300b v5.02 can't be downgraded .. can bb5box add support	zapped	BB5BOX	2	12-03-2007 11:24
Z500 can't be read out sw verison and can't change imei	fuzhiguo8888	NSPRO	5	02-23-2006 21:10
6510 Contact Service can't be repaired by MCU/PPM Flashing	ed2k_7	Nokia Digital Core Technology 4 ( DCT-4 )	6	05-24-2002 09:41

04-14-2002, 22:51	#2 (permalink)
mudboy No Life Poster Join Date: Apr 2001 Location: Czech Republic Posts: 1,059 Member: 4246 Status: Offline Thanks Meter: 9	You cant read and write flash memory of the phone with MBUS cable. You have to make Flasher cable and you can use flasher 1.00b after it. If you have MBUS cable only,you can use only nk_calc from DFS:-( regards