New Nokia Flasher - GSM-Forum

pegonlo · 12-23-2000, 22:43

Hello Guys.
My nokia flasher working only in write mode,in read mode this message :
Flash Loader Init error ! TX=0
My hardware is Amd 400 k6-2,PB Soyo,128 rams
memory.
Port LPT1 is ECP+EPP
???????????????????????????????????????
Thank

Cyberdog · 12-23-2000, 22:56

I don't know the problem, but use Port LPT1: Normal.
My friend have got the same problem, but I read two 8210 today, and it works.

Cyberdog

Leeloo · 12-24-2000, 01:41

Not a good start at christmas, i have the same problem except that i get
Flash Loader Init error ! TX=1
I use a p2-300 / 64ram
Lpt1= Normal
Why ???????????
What does tx=0 /tx=1 mean ?

Be well everybody

------------------

andy · 12-24-2000, 13:54

I have same problem too.For tx=0 i switch tx-rx on cable but get error boot count?
any ideas, help?
Merry Xmas
andy

------------------

lanzar · 12-24-2000, 17:02

I have the same problem.

When i read the program fails with tx=1

If i press enter and then turn on the phone it sais error boot count.

Help!

serova · 12-24-2000, 17:50

plz help i have the some problem with tx=0

chemist · 12-24-2000, 18:17

First of all boys check your interface!I don't if you know yet but the 4 chips are in reality 1 and all the connections pins refer to one chip only The first one!!.After, get the patched tias and a debugger like dexdebug for exaple(www.net.yu/~dejan).Follow instructions and reboot machine using F8 and after starting debugger call Flasher.com and if you have done all right...
Merry Christmas to all from Italy

[This message has been edited by chemist (edited 24 December 2000).]

nightxyz · 12-24-2000, 18:50

Hi ,
Can you explain or give more detail ? I didn't understand completely.I have same problems.It gives sometimes "Boot Count" or "Phone not respond TX=0 or TX=1" message.
Also can you send us correct f_loader.bin and boot.bin files ?

Best Regards...

allecor · 12-25-2000, 16:08

The same problem TX=0. I have a 8210 (destroyed). The problem is that i want to flash it with dejan, but the doesn't react when i have to turn on the phone. Whats wrong??

GsmProf · 12-25-2000, 19:06

@allecor:Look @ your mail

Quote:

Originally posted by allecor:
The same problem TX=0. I have a 8210 (destroyed). The problem is that i want to flash it with dejan, but the doesn't react when i have to turn on the phone. Whats wrong??

[This message has been edited by GsmProf (edited 25 December 2000).]

lanzar · 12-25-2000, 22:53

After all this debuger (dont work with WIN ME) still doesn't work.

Please help.

Lanzar

[email protected]

!!!!!!!!!!!!!!happy new year!!!!!!!!!!!!

lanzar · 12-25-2000, 22:58

LPT port normal
I have one chip. This is a standard chip with gates only that uses small current.
Why do you have to start debuger? I don't have a clue. Please help.

lanzar

[email protected]

Quote:

Originally posted by chemist:
First of all boys check your interface!I don't if you know yet but the 4 chips are in reality 1 and all the connections pins refer to one chip only The first one!!.After, get the patched tias and a debugger like dexdebug for exaple(www.net.yu/~dejan).Follow instructions and reboot machine using F8 and after starting debugger call Flasher.com and if you have done all right...
Merry Christmas to all from Italy

[This message has been edited by chemist (edited 24 December 2000).]

allecor · 12-26-2000, 06:22

Does anybody has a detailed description of making the LPT1 cable for the dejan flasher? I still get the message TX=O and the problem should be the cable and i am not sure if my cable is made correctly. I used the flasher.gif scheme from Dejan.

Thanks in advance and a happppppy new year.

Alec

GsMen · 12-26-2000, 07:19

Try ltp port in other mode (for example epp or ecp)!!!!!!

GsMen

LIKI · 12-26-2000, 10:21

hi,

74hc14 chip.
try to add 5v to this chip.

b.r.
LIKI999.

12-23-2000, 22:43	#1 (permalink)
pegonlo Freak Poster Join Date: Dec 2000 Location: Spain Posts: 159 Member: 2879 Status: Offline Thanks Meter: 8	New Nokia Flasher Hello Guys. My nokia flasher working only in write mode,in read mode this message : Flash Loader Init error ! TX=0 My hardware is Amd 400 k6-2,PB Soyo,128 rams memory. Port LPT1 is ECP+EPP ??????????????????????????????????????? Thank

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MXKEY - new Nokia Flasher added in official support of this forum.	MANOLE	Service Products News & Updates	0	02-20-2009 10:06
Where to have websites paid to download NEW NOKIA FLASHER?	galant7098	Wanted Products	2	08-17-2004 18:28
NEW NOKIA FLASHER & UNLOCKER *FREE DOWNLOAD*	VsH-GsM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	12-03-2001 16:20
New Nokia Flasher Shell By Katot Full	YaSSaX	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	05-11-2001 13:17
New Nokia Flasher	Toto	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	01-04-2001 23:13

12-23-2000, 22:56	#2 (permalink)
Cyberdog No Life Poster Join Date: Dec 2000 Location: Austria Posts: 483 Member: 2832 Status: Offline Thanks Meter: 0	I don't know the problem, but use Port LPT1: Normal. My friend have got the same problem, but I read two 8210 today, and it works. Cyberdog

12-24-2000, 01:41	#3 (permalink)
Leeloo Crazy Poster Join Date: Dec 2000 Location: Sweden Posts: 53 Member: 2806 Status: Offline Thanks Meter: 0	Not a good start at christmas, i have the same problem except that i get Flash Loader Init error ! TX=1 I use a p2-300 / 64ram Lpt1= Normal Why ??????????? What does tx=0 /tx=1 mean ? Be well everybody ------------------

12-24-2000, 13:54	#4 (permalink)
andy Crazy Poster Join Date: Sep 1999 Posts: 53 Member: 531 Status: Offline Thanks Meter: 0	I have same problem too.For tx=0 i switch tx-rx on cable but get error boot count? any ideas, help? Merry Xmas andy ------------------

12-24-2000, 17:02	#5 (permalink)
lanzar Junior Member Join Date: Nov 2000 Location: Slovenia Posts: 39 Member: 2636 Status: Offline Thanks Meter: 0	I have the same problem. When i read the program fails with tx=1 If i press enter and then turn on the phone it sais error boot count. Help!

12-24-2000, 17:50	#6 (permalink)
serova Freak Poster Join Date: Dec 2000 Location: ukraine Age: 51 Posts: 199 Member: 2886 Status: Offline Thanks Meter: 1	plz help i have the some problem with tx=0

12-24-2000, 18:17	#7 (permalink)
chemist Freak Poster Join Date: Oct 2000 Location: probably 'round here! Age: 53 Posts: 131 Member: 2413 Status: Offline Thanks Meter: 0	First of all boys check your interface!I don't if you know yet but the 4 chips are in reality 1 and all the connections pins refer to one chip only The first one!!.After, get the patched tias and a debugger like dexdebug for exaple(www.net.yu/~dejan).Follow instructions and reboot machine using F8 and after starting debugger call Flasher.com and if you have done all right... Merry Christmas to all from Italy [This message has been edited by chemist (edited 24 December 2000).]

12-24-2000, 18:50	#8 (permalink)
nightxyz Freak Poster Join Date: Jun 2000 Posts: 354 Member: 1623 Status: Offline Thanks Meter: 1	Hi , Can you explain or give more detail ? I didn't understand completely.I have same problems.It gives sometimes "Boot Count" or "Phone not respond TX=0 or TX=1" message. Also can you send us correct f_loader.bin and boot.bin files ? Best Regards...

12-25-2000, 16:08	#9 (permalink)
allecor Insane Poster Join Date: Dec 2000 Location: AP/GLD Posts: 95 Member: 2852 Status: Offline Thanks Meter: 0	The same problem TX=0. I have a 8210 (destroyed). The problem is that i want to flash it with dejan, but the doesn't react when i have to turn on the phone. Whats wrong??

12-25-2000, 22:53	#11 (permalink)
lanzar Junior Member Join Date: Nov 2000 Location: Slovenia Posts: 39 Member: 2636 Status: Offline Thanks Meter: 0	After all this debuger (dont work with WIN ME) still doesn't work. Please help. Lanzar [email protected] !!!!!!!!!!!!!!happy new year!!!!!!!!!!!!

12-26-2000, 06:22	#13 (permalink)
allecor Insane Poster Join Date: Dec 2000 Location: AP/GLD Posts: 95 Member: 2852 Status: Offline Thanks Meter: 0	Does anybody has a detailed description of making the LPT1 cable for the dejan flasher? I still get the message TX=O and the problem should be the cable and i am not sure if my cable is made correctly. I used the flasher.gif scheme from Dejan. Thanks in advance and a happppppy new year. Alec

12-26-2000, 07:19	#14 (permalink)
GsMen No Life Poster Join Date: Sep 2000 Location: Netherlands Posts: 857 Member: 2100 Status: Offline Thanks Meter: 40	Try ltp port in other mode (for example epp or ecp)!!!!!! GsMen

12-26-2000, 10:21	#15 (permalink)
LIKI Freak Poster Join Date: Jun 2000 Posts: 357 Member: 1641 Status: Offline Thanks Meter: 54	hi, 74hc14 chip. try to add 5v to this chip. b.r. LIKI999.