NO NETWORK... different breed!!!... read on guys! - GSM-Forum

trafix · 06-24-2001, 19:42

ive encountered this problem mostly on 3210's, the logo disapears first before the signal indicator, wherein the normal thing that happens is that the signal indicator disapears before the logo right?

-same thing with some 8210's and some 5110's, is this a hardware or a software problem?

has any of you guys had this prob? thanks!

aZyWeRks · 06-24-2001, 20:43

How long before the signal bar goes out? I have a similar problem too.

trafix · 06-25-2001, 14:14

less than 10 secs pare... ive tried everything with my limited experience.. tried flashing it too, fullflash, just dont know if i did it right 02000-03d00?.. these cases are gettin rampant

ambot told me youve got solution for 3210 with 4 locks closed? wers your shop?

trafix · 06-25-2001, 18:18

less than 10 secs after you turn it "on" it just goes out..

jj008 · 06-25-2001, 18:30

The problem is you used the wrong flash. Or if you did use the correct one, it was corrupt. If you made a backup and it is a working one (not 00FF) in hex, then you will get reception and then find a different flash, (or e-mail me i will give you correct one).

Or if you need the full flash e-mail me i will send it to you. Just tell me what version you have.

Also rate me pleaese, on the left.

aZyWeRks · 06-26-2001, 01:34

You guys both check your mail.

About the signal problem, if you are absolutely sure that it wasn't by wrong flashing, then it is definitely hardware.

I have a similar case here, it has been dipped into water and now the phone was dead. 2 months after the incident, the owner came to me to have it fixed. Its now running but has this signal problem.

Regards,

aCe

trafix · 06-26-2001, 08:22

i thought so.. thanks azy!

06-24-2001, 19:42	#1 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	NO NETWORK... different breed!!!... read on guys! ive encountered this problem mostly on 3210's, the logo disapears first before the signal indicator, wherein the normal thing that happens is that the signal indicator disapears before the logo right? -same thing with some 8210's and some 5110's, is this a hardware or a software problem? has any of you guys had this prob? thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
just working on nokia on others no network or loose network	falak	TORNADO - SIM	6	04-28-2008 07:46
3330: no network only NET name on LCD	PSG	Nokia Hardware & Hardware Repair	2	09-27-2006 09:22
Zulea - no network after imei change on T630	cellularman	SonyEricsson (USB-Smart)	2	01-12-2006 10:57
No Network & No Access what's the difference ?!	Laser	Old Ericsson Phones & Sony Phones	1	06-09-2003 01:00
3310 v4.24 no network, NFRE reads imei FFFF....6565....., Brobel/Viper please helps	pyramid	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	10-04-2001 15:29

06-24-2001, 20:43	#2 (permalink)
aZyWeRks Freak Poster Join Date: Jan 2001 Location: I.C., R.P. Posts: 185 Member: 3165 Status: Offline Thanks Meter: 0	How long before the signal bar goes out? I have a similar problem too.

06-25-2001, 14:14	#3 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	less than 10 secs pare... ive tried everything with my limited experience.. tried flashing it too, fullflash, just dont know if i did it right 02000-03d00?.. these cases are gettin rampant ambot told me youve got solution for 3210 with 4 locks closed? wers your shop?

06-25-2001, 18:18	#4 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	less than 10 secs after you turn it "on" it just goes out..

06-25-2001, 18:30	#5 (permalink)
jj008 No Life Poster Join Date: Jun 2001 Location: London Age: 41 Posts: 503 Member: 5006 Status: Offline Thanks Meter: 2	The problem is you used the wrong flash. Or if you did use the correct one, it was corrupt. If you made a backup and it is a working one (not 00FF) in hex, then you will get reception and then find a different flash, (or e-mail me i will give you correct one). Or if you need the full flash e-mail me i will send it to you. Just tell me what version you have. Also rate me pleaese, on the left.

06-26-2001, 01:34	#6 (permalink)
aZyWeRks Freak Poster Join Date: Jan 2001 Location: I.C., R.P. Posts: 185 Member: 3165 Status: Offline Thanks Meter: 0	You guys both check your mail. About the signal problem, if you are absolutely sure that it wasn't by wrong flashing, then it is definitely hardware. I have a similar case here, it has been dipped into water and now the phone was dead. 2 months after the incident, the owner came to me to have it fixed. Its now running but has this signal problem. Regards, aCe

06-26-2001, 08:22	#7 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	i thought so.. thanks azy!