8210 power on problem - GSM-Forum

thecult · 11-26-2002, 15:15

Hello

Anybody knows about this? I have one 8210 but it not powers on, I have disassembled, cleaned, checked... it still died

I have short-circuit two soldered points in power-on-button but it don't powers on (then it's not a button problem)

Battery is good, connections are good too

I would try to reflow with hot-air but the power suply ic seems to be glued!!! (not soldered) and other ic's seems to be glued!

any possible solution? anibody have same problem?

thanks a lot!

best regards

Farmer.PT · 11-26-2002, 17:14

Try to reflow ccont or replace it

thecult · 11-26-2002, 19:33

ok thanks! I will tell you (but I buy my own hot-air-soldering-station in december)

best regards

11-26-2002, 15:15	#1 (permalink)
thecult No Life Poster Join Date: Feb 2002 Location: burning phones Posts: 1,704 Member: 9700 Status: Offline Thanks Meter: 62	8210 power on problem Hello Anybody knows about this? I have one 8210 but it not powers on, I have disassembled, cleaned, checked... it still died I have short-circuit two soldered points in power-on-button but it don't powers on (then it's not a button problem) Battery is good, connections are good too I would try to reflow with hot-air but the power suply ic seems to be glued!!! (not soldered) and other ic's seems to be glued! any possible solution? anibody have same problem? thanks a lot! best regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7610 power on problem no power on with power touch	shani72	Nokia Hardware & Hardware Repair	2	09-10-2008 05:51
nokia 8210 powers on and goes dead after 5 seconds	gsmwiz	Nokia Hardware & Hardware Repair	4	03-21-2005 20:06
8210 power on pb pls help???	proxy_gsm	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	02-17-2004 19:57
8210 power on..no signal	Finn	Nokia Hardware & Hardware Repair	5	03-01-2003 06:47
8210 power ON only display Batery Bar	Hary	Nokia Hardware & Hardware Repair	2	01-27-2003 19:58

11-26-2002, 17:14	#2 (permalink)
Farmer.PT Freak Poster Join Date: Jul 2000 Location: Portugal Age: 46 Posts: 103 Member: 1758 Status: Offline Thanks Meter: 1	Try to reflow ccont or replace it

11-26-2002, 19:33	#3 (permalink)
thecult No Life Poster Join Date: Feb 2002 Location: burning phones Posts: 1,704 Member: 9700 Status: Offline Thanks Meter: 62	ok thanks! I will tell you (but I buy my own hot-air-soldering-station in december) best regards