Nokia Flashing Trick

[X-Shadow]

Hello Guys,

Here is a trick for people who are flashing Nokias<br />either by Dejan 1.00 (for unlock) or Dejan 1.04 <br />(for upgrade). You can flash the unit without <br />using any battery at all. Just use fast/swift <br />charger ACP-9U (160 mA, 50-60 Hz, DC 6.2V, 720 mA)

Only connect the charger when the software says<br />"Loading boot loader" (instead of pushing the <br />power button, connect the charger <img src="smile.gif" border="0"> )

This is more reliable way to flash because you<br />will no longer worry about "Battery Low" or stop<br />in the middle of flashing and kill phone <img src="frown.gif" border="0"> With<br />this technique, you can even flash PCB alone with-<br />out the LCD + Keypads + Casing etc... But off <br />course you still need the battery to power on the<br />phone afer flashing <img src="smile.gif" border="0">

Tested on:<br />6210 = Partial/Full<br />3310 = Partial/Full + PCB Only<br />5110 = Partial/Full<br />8850 = Full

Remember that you must use fast/swift charger and<br />not slow charger! Because using slow charger you<br />will get error at around 13% of progress bar <img src="frown.gif" border="0">

By the way, I think this will also work with <br />NU 2000 and Nokey <img src="smile.gif" border="0">

Best Regards,<br />X-Shadow

[G-Man]

Tested on 8210 5.28 partial.<br />No battery = CMDError!ash...<br />With battery = work 100%

Charger details are:<br />ACP-7X<br />Input: 230v~t10%/50hz/21mA/4.8VA<br />Output: 3.7V=/355mA

Looks like I will have to try and find one of these chargers because this could be very useful and save a lot on postal charges.

[ 16 October 2001: Message edited by: G-Man ]</p>

[X-Shadow]

Hello G-Man,

Yes, you are using slow charger... The mA is not<br />enough + the voltage too <img src="smile.gif" border="0"> I said that it wont<br />work on slow chargers, only fast/swift chargers...

B.R.

[jsp_m]

This is the one:<br />(ACP-8X cannot be used also?)<br /> <br /> <img src="cool.gif" border="0">