PB WITH 3310 and 8210 - GSM-Forum

BABADJO · 06-17-2003, 15:30

Ihave two problems with many 3310 and 8210 phones

the FIRST problem:with a full charged (4 bars) it say's that the bat is empty every time i need to effect a call
- i have changed the PA but the same pb
- i have changed Bat the same problem
- i have changed the connector of bat the same pb
- i have rehot the ccont the hagar but the same.....

the SECOND problem:when the 3310 is connected to the charger i have a full signal but if it'is not connected the signal
drops

thks for Help

thks for help

trashed · 06-17-2003, 18:23

@BABADJO

did you try to use different batteries? might be battery problem. check it first before going to hardware.

komix · 06-17-2003, 18:46

i solved this problem on 8210! change hagar ic there is problem!

BABADJO · 06-17-2003, 19:09

for the second i have solved the problem
but the great

problem

is the FIRST
for information the solution for the second is by changing 26Mhz TCXO
plz Help for the first case

NNCome · 06-18-2003, 17:47

check the power ic....
my guest it short

BABADJO · 06-18-2003, 18:56

i need a logic solution
thks for help

06-17-2003, 15:30	#1 (permalink)
BABADJO Junior Member Join Date: May 2003 Age: 44 Posts: 6 Member: 29946 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	PB WITH 3310 and 8210 Ihave two problems with many 3310 and 8210 phones the FIRST problem:with a full charged (4 bars) it say's that the bat is empty every time i need to effect a call - i have changed the PA but the same pb - i have changed Bat the same problem - i have changed the connector of bat the same pb - i have rehot the ccont the hagar but the same..... the SECOND problem:when the 3310 is connected to the charger i have a full signal but if it'is not connected the signal drops thks for Help thks for help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
PB WITH 3310 and 8210	BABADJO	Nokia Hardware & Hardware-Repair Area	0	06-17-2003 13:53
3310 and 8210 dead, but flashed OK...	CellM@n	Nokia Hardware & Hardware-Repair Area	7	05-27-2002 23:35
3310 and 8210 faulty displays with capacitors	chris_ua	Nokia Hardware & Hardware-Repair Area	4	03-25-2002 07:42
COBBA in 3310 and 8210 ???????????	fm-gsm	Nokia Hardware & Hardware-Repair Area	1	10-20-2001 03:23
3310 and 8210 eeprom security checksum faild .	makona	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	08-27-2001 02:48

06-17-2003, 18:23	#2 (permalink)
trashed Product Supporter Join Date: Jan 2002 Location: Philippines Posts: 479 Member: 8303 Status: Offline Thanks: 4 Thanked 96 Times in 49 Posts	@BABADJO did you try to use different batteries? might be battery problem. check it first before going to hardware.

06-17-2003, 18:46	#3 (permalink)
komix No Life Poster Join Date: Feb 2001 Location: Latvia Age: 39 Posts: 874 Member: 3459 Status: Offline Thanks: 10 Thanked 5 Times in 4 Posts	i solved this problem on 8210! change hagar ic there is problem!

06-17-2003, 19:09	#4 (permalink)
BABADJO Junior Member Join Date: May 2003 Age: 44 Posts: 6 Member: 29946 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	for the second i have solved the problem but the great problem is the FIRST for information the solution for the second is by changing 26Mhz TCXO plz Help for the first case

06-18-2003, 17:47	#5 (permalink)
NNCome Insane Poster Join Date: Feb 2003 Location: indonesia Age: 35 Posts: 78 Member: 23333 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	check the power ic.... my guest it short

06-18-2003, 18:56	#6 (permalink)
BABADJO Junior Member Join Date: May 2003 Age: 44 Posts: 6 Member: 29946 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	i need a logic solution thks for help