Post me all your problem (DCT-3 phones only) - GSM-Forum

blu angel · 05-24-2006, 07:38

Post here for any problem you encounter on your DCT-3 phones and i will help you solve it..!!!

BR...

jerieves · 05-24-2006, 07:56

5110 no signal. drp unit, how to repair it, please help me

blu angel · 05-24-2006, 08:17

If the unit signal is dropping after 4 to 6 seconds... P.A. boss hehe!! (should i really gonna answer your query..baka mas magaling ka pa sakin boss)

if it's no network found when you select manual mode on settings definately it's on the ic situated just above the RX/TX combiner.. the ic that has 32 pins.. refer to your service manual to find it... reheat or better change it..

tested 100% works on all 5110 here with no signal

BR...

jerieves · 05-24-2006, 08:24

you really good. dont limit it to dct3 only. why not try for dct4 or higher. i can help you with this thread.

aldwin · 05-24-2006, 10:00

tanx,im new in cp repair but trying to learn,i dont know yet how to use the heat gun(smd) in cp repair,or what solkdering paste to use,

blu angel · 05-24-2006, 10:23

I help only on trouble shooting DCT-3 phones man...

but anyway if your new on the world of GSM.. let me advice you this, don't used hot airs if you still don't know how to use it.. using it might cause bigger damaged to the phone... the appropriate heat and air is 5/4

regarding on which soldering paste to used just ask assistance on electronics shop near you they know what you need..

This thread is recommended for newbies...

BR...

IgorIgs · 05-24-2006, 15:43

Here is the problem. Nokia 3410 is restarting by itself, after few clicks or after few seconds he did it alone. i try to flash with KNOK PHOENIX with full flash and 3410 is flashing fine but after finished flash he is dead.

Eny Ideas??? regards... name is IGOR

hafeez48 · 05-24-2006, 18:09

3310 Phone Power On With Ufsx Box But Not With Battry
plz give me solution with pic ...........(power key is ok........

adebisijohn · 05-25-2006, 00:17

my nagging problems are on solutions to both dead and notpowering on nokia 3310. THANKS
[email protected]

..::Mr999::.. · 05-25-2006, 04:57

mine problem nokia 2100 power ok with ufs ...but with battry not..

i did changed battry and connecters ..

how to solve

.::Mystic::. · 05-25-2006, 07:23

Quote:

Originally Posted by IgorIgs

Here is the problem. Nokia 3410 is restarting by itself, after few clicks or after few seconds he did it alone. i try to flash with KNOK PHOENIX with full flash and 3410 is flashing fine but after finished flash he is dead.

Eny Ideas??? regards... name is IGOR

reflash using ufs or some other device

IgorIgs · 05-25-2006, 11:15

Quote:

Originally Posted by mysticmist

reflash using ufs or some other device

Thanks but problem is Hardware I solve it

sundar83 · 05-26-2006, 10:24

geocadin flasher means...........?

blu angel · 05-27-2006, 01:49

oopss sorry for delayed reply been busy this past 2 days eh....

Quote:

Originally Posted by hafeez48

3310 Phone Power On With Ufsx Box But Not With Battry
plz give me solution with pic ...........(power key is ok........

100% flash ic man.. change it...

blu angel · 05-27-2006, 01:50

Quote:

Originally Posted by ..::Mr999::..

mine problem nokia 2100 power ok with ufs ...but with battry not..

i did changed battry and connecters ..

how to solve

your problem is flash ic also mate...

05-24-2006, 07:38	#1 (permalink)
blu angel No Life Poster Join Date: Aug 2005 Location: Treasure Island of the pacific Posts: 601 Member: 168090 Status: Offline Thanks Meter: 92	Post me all your problem (DCT-3 phones only) Post here for any problem you encounter on your DCT-3 phones and i will help you solve it..!!! BR...

05-24-2006, 08:17	#3 (permalink)
blu angel No Life Poster Join Date: Aug 2005 Location: Treasure Island of the pacific Posts: 601 Member: 168090 Status: Offline Thanks Meter: 92	If the unit signal is dropping after 4 to 6 seconds... P.A. boss hehe!! (should i really gonna answer your query..baka mas magaling ka pa sakin boss) if it's no network found when you select manual mode on settings definately it's on the ic situated just above the RX/TX combiner.. the ic that has 32 pins.. refer to your service manual to find it... reheat or better change it.. tested 100% works on all 5110 here with no signal BR... Last edited by blu angel; 05-24-2006 at 11:07.

05-24-2006, 10:23	#6 (permalink)
blu angel No Life Poster Join Date: Aug 2005 Location: Treasure Island of the pacific Posts: 601 Member: 168090 Status: Offline Thanks Meter: 92	I help only on trouble shooting DCT-3 phones man... but anyway if your new on the world of GSM.. let me advice you this, don't used hot airs if you still don't know how to use it.. using it might cause bigger damaged to the phone... the appropriate heat and air is 5/4 regarding on which soldering paste to used just ask assistance on electronics shop near you they know what you need.. This thread is recommended for newbies... BR... Last edited by blu angel; 05-24-2006 at 11:06.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post me all your NETWORK PROBLEM...	khem	Nokia Repair Guide and FAQ	963	04-07-2017 10:03
Post me all your 3100 & 6600 problems...!	khem	Nokia Hardware & Hardware Repair	141	04-14-2011 09:09
Help me pls.....nokia DCT-3 phone 3210 CMD error	hamidtele	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-23-2003 12:47
I have PKD-1 but need full version of Wintesla / files for all DCT-3 phones please ;)	STB Trading	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	10-13-2002 11:32
I have PKD-1 but need full version of Wintesla / files for all DCT-3 phones please ;)	STB Trading	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-12-2002 11:33

05-24-2006, 07:56	#2 (permalink)
jerieves Freak Poster Join Date: Mar 2006 Location: in-house Posts: 303 Member: 239484 Status: Offline Thanks Meter: 14	5110 no signal. drp unit, how to repair it, please help me

05-24-2006, 08:24	#4 (permalink)
jerieves Freak Poster Join Date: Mar 2006 Location: in-house Posts: 303 Member: 239484 Status: Offline Thanks Meter: 14	you really good. dont limit it to dct3 only. why not try for dct4 or higher. i can help you with this thread.

05-24-2006, 10:00	#5 (permalink)
aldwin Insane Poster Join Date: Nov 2004 Posts: 65 Member: 94561 Status: Offline Thanks Meter: 20	tanx,im new in cp repair but trying to learn,i dont know yet how to use the heat gun(smd) in cp repair,or what solkdering paste to use,

05-24-2006, 15:43	#7 (permalink)
IgorIgs Freak Poster Join Date: Mar 2006 Location: S E R B I A Age: 44 Posts: 132 Member: 245346 Status: Offline Thanks Meter: 19	Here is the problem. Nokia 3410 is restarting by itself, after few clicks or after few seconds he did it alone. i try to flash with KNOK PHOENIX with full flash and 3410 is flashing fine but after finished flash he is dead. Eny Ideas??? regards... name is IGOR

05-24-2006, 18:09	#8 (permalink)
hafeez48 Major Poster Join Date: May 2006 Location: mumbai Posts: 44 Member: 278628 Status: Offline Thanks Meter: 2	3310 Phone Power On With Ufsx Box But Not With Battry plz give me solution with pic ...........(power key is ok........

05-25-2006, 00:17	#9 (permalink)
adebisijohn Junior Member Join Date: Apr 2006 Posts: 5 Member: 256604 Status: Offline Thanks Meter: 3	my nagging problems are on solutions to both dead and notpowering on nokia 3310. THANKS [email protected]

05-25-2006, 04:57	#10 (permalink)
..::Mr999::.. No Life Poster Join Date: Jun 2005 Location: India ( Punjab ) / China Age: 38 Posts: 4,995 Member: 154749 Status: Offline Sonork: 100.92483 Thanks Meter: 1,048	mine problem nokia 2100 power ok with ufs ...but with battry not.. i did changed battry and connecters .. how to solve

05-26-2006, 10:24	#13 (permalink)
sundar83 Freak Poster Join Date: Jan 2006 Location: india Age: 40 Posts: 424 Member: 223120 Status: Offline Thanks Meter: 131	geocadin flasher means...........?