Problem with 3210 after flashing - GSM-Forum

fanie · 07-19-2004, 12:08

Hi All,

I need some help please.
After flashing I'm not able to update the faid as not one of the programs which i got pick the phone up with a m/f-bus cable.
Programs used Nokia tools v3.25
nokia tools 1.8
rollis flasher 479
the phone was flash with knok 95.

Regards

micutu · 07-20-2004, 18:26

try with dct3 calculator

fanie · 07-21-2004, 13:34

Still no luck.

Thanks

DeltaGSM · 07-21-2004, 16:33

change eeprom first then update faid.

BR

goanga · 07-21-2004, 17:54

Use eeprom tools first ! If not ...use griffin to solve your problem 100% ! GOOD LUCK !

bestman · 07-25-2004, 01:09

you can use twister for correction for your phone.
this tool is cheap to purchase for your phone solution.

bestman.

fanie · 08-02-2004, 06:45

Thanks to everyone you replied, but there seems to be a problem as the phone is not seen. There is a error reading the phone on the com port with the cable. If another phone is connected then the program pick's the phone up, this prove that the system is working. So the problem must be with the 3210, but again it was picked up before the phone was flashed.

Regards

Yoda_Brno · 08-02-2004, 08:05

If u have Dejan Flasher 1.06, try flash it with this and Dejan DOS flasher. (for me the best solution for 3210 phones. After flash it makes recalc by itself) Or try this tool http://www.volny.cz/rastasp/Jordik.zip. U are not noob, i am not noob but what about pins on the board? Did u try to clean them? (i am sure that u did) Flashing OK = Reading have to be ok.

IF u wil read phone with Jordik`s tool succesful, set netmonitor to OFF and click "MAKE ALL"... the simplest way... And What about ROM version in your 3210???

fanie · 08-04-2004, 06:44

Thanks I will try and flash it again

Regards Fanie

fanie · 08-10-2004, 08:08

Hi All,

Sorry to say but it is still not working, any other idea's

Regards Fanie

micutu · 08-14-2004, 13:39

read it with nok tools to see if is not locked in 4 chanels, if yes upload a virgin eeprom and set faid. if still don't work send me an e-mail to give you a DCT3 calculator for 4 chanel's.
Regards

07-19-2004, 12:08	#1 (permalink)
fanie Junior Member Join Date: Jun 2003 Age: 68 Posts: 6 Member: 32819 Status: Offline Thanks Meter: 0	Problem with 3210 after flashing Hi All, I need some help please. After flashing I'm not able to update the faid as not one of the programs which i got pick the phone up with a m/f-bus cable. Programs used Nokia tools v3.25 nokia tools 1.8 rollis flasher 479 the phone was flash with knok 95. Regards

08-02-2004, 06:45	#7 (permalink)
fanie Junior Member Join Date: Jun 2003 Age: 68 Posts: 6 Member: 32819 Status: Offline Thanks Meter: 0	Problem with 3210 after flashing Thanks to everyone you replied, but there seems to be a problem as the phone is not seen. There is a error reading the phone on the com port with the cable. If another phone is connected then the program pick's the phone up, this prove that the system is working. So the problem must be with the 3210, but again it was picked up before the phone was flashed. Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with e250 after flash with e250d	realmadrid	UST Pro II	6	02-17-2009 15:01
Two Problems with D600 after flash with NS Dongel	man1	NSPRO	4	02-06-2006 10:42
Problem with 3210 after repair eprom , any help ?	Kilowat	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	11	10-04-2001 15:36
problem with C30 after flashing language	kash2k	NON Siemens Brand (ODM Phones)	0	09-29-2001 20:55

07-20-2004, 18:26	#2 (permalink)
micutu Freak Poster Join Date: Jul 2004 Location: Fagaras Romania Age: 45 Posts: 130 Member: 73571 Status: Offline Thanks Meter: 2	try with dct3 calculator

07-21-2004, 13:34	#3 (permalink)
fanie Junior Member Join Date: Jun 2003 Age: 68 Posts: 6 Member: 32819 Status: Offline Thanks Meter: 0	Still no luck. Thanks

07-21-2004, 16:33	#4 (permalink)
DeltaGSM No Life Poster Join Date: May 2004 Location: Bandung-Flasher.com Posts: 1,118 Member: 65947 Status: Offline Thanks Meter: 135	change eeprom first then update faid. BR

07-21-2004, 17:54	#5 (permalink)
goanga No Life Poster Join Date: Mar 2004 Location: romania Age: 42 Posts: 742 Member: 57035 Status: Offline Thanks Meter: 70	Use eeprom tools first ! If not ...use griffin to solve your problem 100% ! GOOD LUCK !

07-25-2004, 01:09	#6 (permalink)
bestman No Life Poster Join Date: Apr 2004 Age: 49 Posts: 1,271 Member: 61294 Status: Offline Thanks Meter: 49	you can use twister for correction for your phone. this tool is cheap to purchase for your phone solution. bestman.

08-02-2004, 08:05	#8 (permalink)
Yoda_Brno Freak Poster Join Date: Sep 2003 Location: Czech Rep. Age: 43 Posts: 348 Member: 40423 Status: Offline Thanks Meter: 5	If u have Dejan Flasher 1.06, try flash it with this and Dejan DOS flasher. (for me the best solution for 3210 phones. After flash it makes recalc by itself) Or try this tool http://www.volny.cz/rastasp/Jordik.zip. U are not noob, i am not noob but what about pins on the board? Did u try to clean them? (i am sure that u did) Flashing OK = Reading have to be ok. IF u wil read phone with Jordik`s tool succesful, set netmonitor to OFF and click "MAKE ALL"... the simplest way... And What about ROM version in your 3210???

08-04-2004, 06:44	#9 (permalink)
fanie Junior Member Join Date: Jun 2003 Age: 68 Posts: 6 Member: 32819 Status: Offline Thanks Meter: 0	Thanks I will try and flash it again Regards Fanie

08-10-2004, 08:08	#10 (permalink)
fanie Junior Member Join Date: Jun 2003 Age: 68 Posts: 6 Member: 32819 Status: Offline Thanks Meter: 0	Hi All, Sorry to say but it is still not working, any other idea's Regards Fanie

08-14-2004, 13:39	#11 (permalink)
micutu Freak Poster Join Date: Jul 2004 Location: Fagaras Romania Age: 45 Posts: 130 Member: 73571 Status: Offline Thanks Meter: 2	read it with nok tools to see if is not locked in 4 chanels, if yes upload a virgin eeprom and set faid. if still don't work send me an e-mail to give you a DCT3 calculator for 4 chanel's. Regards