Problems upgrading 7110s - GSM-Forum

Hanukkah · 01-20-2002, 03:09

I've been having problems upgrading 7110s v4.80 or lower to v5.01. After upgrade the phone either hangs or auto-shuts off. I've been using JIC, and now I've tried just flashing using Brad's MCU and PPM files.. but to no success. Anybody can help?

neb · 01-20-2002, 03:55

Hello Hanukkah,

I suggest you'll try or use versions lower than v5.01.As I experienced, old versions of 7110 can't be upgraded up to the latest.

BR,

neb

ed2k_7 · 01-20-2002, 04:27

SIMPLE AS THIS:

Try to flash 7110 eeprom fls. you can download it from any page giving free partials, or you can mail me. After that, phone must be reset with cracked Wintesla or a NokiaTool (UI Settings, Device Data & SMS Data), for sometimes the contrast of the unit will be affected but don't panic you have the NKProfile to adjust it.

THIS SOLUTION WAS TESTED BY ME 100% WORKS!!! ...and I hope tt will work for you as well

mudboy · 01-20-2002, 11:07

I am not sure but if you want to update 7110 you have to reset factory BEFORE updating and after updating,too! regards

greenapple · 01-20-2002, 15:17

yep ed2k is right.... but first, check the cell if it has some vital telephone numbers b4 upgrading so that u can have a way to put back hundreds of telephones... then Reset by software flashing or nokiatools or by wintesla... i won't matter much if u go up version or down... hope this helps..

backup..... to be sure, the eeprom part... 8)

bRAd · 01-20-2002, 18:36

i use this code with sim inside before upgrade and after upgrade.. this reset units to factory..

*#7370#

 (tnx ed2k)

[ 20 January 2002 20:08: Message edited by: bRAd ]

ed2k_7 · 01-20-2002, 18:58

<img src="smile.gif" border="0"> ... and yes with simcard inserted...

sat · 01-20-2002, 19:58

I had same problems on 3310's and solved all of them just by resetting with cracked wintesla to defaults.. good luck

jarod · 01-20-2002, 20:02

Hi!

I have problem too with 7110 upgrading... Flash is updated, log to correct FAID and in caller groups logo is missing in every group. The startup logo missing too and I can't put back. I have tried reset with NokiaTool and with NokiaProfile too but no change. With 6150 and 6110 happened this sometimes and I can put back only with Logomanager manually. I have downloaded original logos from another phone and so can I put it back to phone... It's normal or something wrong?

jrd

bRAd · 01-20-2002, 20:09

yes, with sim inside *#7370# work on 7110, 6210, 6250

jarod> do you try check everything in nokiatool and apply sfs ??

[ 20 January 2002 20:12: Message edited by: bRAd ]

jarod · 01-20-2002, 23:21

Hi!

Brad, thanks for the idea, everything not checked but with UI settings isn't enough. And please tell me, why missing all group logo after update? btw, I check this...

jrd

neb · 01-21-2002, 00:00

<img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0">

[ 21 January 2002 00:04: Message edited by: neb ]

Hanukkah · 01-21-2002, 11:18

Thanks all for the reply. <img src="wink.gif" border="0">

Nick-A · 01-21-2002, 16:47

I just tried updating a 7110 4.88 to 5.01 without resetting it, when i turn it on with a simcard, the display goes all werid, only showing parts of it, and in a strange font... any ideas?

Nick

jarod · 01-21-2002, 19:28

Hi!

Sorry it's not a 7110 but this happened today. I have upgraded a 6110 5.31 A to 548 G. With Nokiatool reseted phone before and after upgrade and still missing group 'n' startup logo... To correct, I must upload it manually back... hmmm, the truth is out there <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

jrd

01-20-2002, 03:09	#1 (permalink)
Hanukkah No Life Poster Join Date: Jul 2001 Location: RP Age: 48 Posts: 890 Member: 5246 Status: Offline Thanks Meter: 9	Problems upgrading 7110s I've been having problems upgrading 7110s v4.80 or lower to v5.01. After upgrade the phone either hangs or auto-shuts off. I've been using JIC, and now I've tried just flashing using Brad's MCU and PPM files.. but to no success. Anybody can help?

01-20-2002, 04:27	#3 (permalink)
ed2k_7 No Life Poster Join Date: May 2001 Location: Manila, Philippines Age: 53 Posts: 1,373 Member: 4408 Status: Offline Thanks Meter: 5	SIMPLE AS THIS: Try to flash 7110 eeprom fls. you can download it from any page giving free partials, or you can mail me. After that, phone must be reset with cracked Wintesla or a NokiaTool (UI Settings, Device Data & SMS Data), for sometimes the contrast of the unit will be affected but don't panic you have the NKProfile to adjust it. THIS SOLUTION WAS TESTED BY ME 100% WORKS!!!<br />...and I hope tt will work for you as well

01-20-2002, 11:07	#4 (permalink)
mudboy No Life Poster Join Date: Apr 2001 Location: Czech Republic Posts: 1,059 Member: 4246 Status: Offline Thanks Meter: 9	I am not sure but if you want to update 7110 you have to reset factory BEFORE updating and after updating,too!<br />regards

01-20-2002, 15:17	#5 (permalink)
greenapple Freak Poster Join Date: Jul 2001 Age: 59 Posts: 325 Member: 5355 Status: Offline Thanks Meter: 5	yep ed2k is right.... but first, check the cell if it has some vital telephone numbers b4 upgrading so that u can have a way to put back hundreds of telephones... then Reset by software flashing or nokiatools or by wintesla... i won't matter much if u go up version or down... <br />hope this helps.. backup..... to be sure, the eeprom part... 8)

01-20-2002, 18:36	#6 (permalink)
bRAd Freak Poster Join Date: Nov 2000 Location: Czech Republic Posts: 359 Member: 2558 Status: Offline Thanks Meter: 5	i use this code with sim inside before upgrade and after upgrade..<br />this reset units to factory.. *#7370# <br />(tnx ed2k) <FONT COLOR="#ffff00" SIZE="1">[ 20 January 2002 20:08: Message edited by: bRAd ]</font>

01-20-2002, 03:55	#2 (permalink)
neb Freak Poster Join Date: Dec 1999 Location: Earth Posts: 461 Member: 751 Status: Offline Thanks Meter: 19	Hello Hanukkah, I suggest you'll try or use versions lower than v5.01.As I experienced, old versions of 7110 can't be upgraded up to the latest. BR, neb

01-20-2002, 18:58	#7 (permalink)
ed2k_7 No Life Poster Join Date: May 2001 Location: Manila, Philippines Age: 53 Posts: 1,373 Member: 4408 Status: Offline Thanks Meter: 5	<img src="smile.gif" border="0"> ... and yes with simcard inserted...

01-20-2002, 19:58	#8 (permalink)
sat Freak Poster Join Date: Aug 2001 Location: GSMLAND Posts: 479 Member: 5764 Status: Offline Thanks Meter: 2	I had same problems on 3310's and solved all of them just by resetting with cracked wintesla to defaults..<br />good luck

01-20-2002, 20:02	#9 (permalink)
jarod No Life Poster Join Date: May 2001 Posts: 800 Member: 4744 Status: Offline Thanks Meter: 0	Hi! I have problem too with 7110 upgrading...<br />Flash is updated, log to correct FAID and in caller groups logo is missing in every group.<br />The startup logo missing too and I can't put back. I have tried reset with NokiaTool and with NokiaProfile too but no change.<br />With 6150 and 6110 happened this sometimes and I can put back only with Logomanager manually. I have downloaded original logos from another phone and so can I put it back to phone...<br />It's normal or something wrong? jrd

01-20-2002, 20:09	#10 (permalink)
bRAd Freak Poster Join Date: Nov 2000 Location: Czech Republic Posts: 359 Member: 2558 Status: Offline Thanks Meter: 5	yes, with sim inside *#7370#<br />work on 7110, 6210, 6250 jarod> do you try check everything in nokiatool and apply sfs ?? <FONT COLOR="#ffff00" SIZE="1">[ 20 January 2002 20:12: Message edited by: bRAd ]</font>

01-20-2002, 23:21	#11 (permalink)
jarod No Life Poster Join Date: May 2001 Posts: 800 Member: 4744 Status: Offline Thanks Meter: 0	Hi! Brad, thanks for the idea, everything not checked but with UI settings isn't enough. <br />And please tell me, why missing all group logo after update?<br />btw, I check this... jrd

01-21-2002, 00:00	#12 (permalink)
neb Freak Poster Join Date: Dec 1999 Location: Earth Posts: 461 Member: 751 Status: Offline Thanks Meter: 19	<img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <FONT COLOR="#ffff00" SIZE="1">[ 21 January 2002 00:04: Message edited by: neb ]</font>

01-21-2002, 11:18	#13 (permalink)
Hanukkah No Life Poster Join Date: Jul 2001 Location: RP Age: 48 Posts: 890 Member: 5246 Status: Offline Thanks Meter: 9	Thanks all for the reply. <img src="wink.gif" border="0">

01-21-2002, 16:47	#14 (permalink)
Nick-A No Life Poster Join Date: Jan 2002 Posts: 519 Member: 8249 Status: Offline Thanks Meter: 2	I just tried updating a 7110 4.88 to 5.01 without resetting it, when i turn it on with a simcard, the display goes all werid, only showing parts of it, and in a strange font... any ideas? Nick

01-21-2002, 19:28	#15 (permalink)
jarod No Life Poster Join Date: May 2001 Posts: 800 Member: 4744 Status: Offline Thanks Meter: 0	Hi! Sorry it's not a 7110 but this happened today.<br />I have upgraded a 6110 5.31 A to 548 G. With Nokiatool reseted phone before and after upgrade and still missing group 'n' startup logo...<br />To correct, I must upload it manually back...<br />hmmm, the truth is out there <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> jrd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solution to upgrade 7110 from 4.84, 4.88 up to V5.01	banKa	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	03-02-2002 09:34
Upgrade 7110 from 4.88 to 5.01	northernbloke	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	02-22-2002 19:23
Trouble upgrading 7110	Beef	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	19	02-21-2002 19:18
Upgrade 7110	N.Schmetz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	04-11-2001 22:08
Problem with 7110 4.88 and Dejan Flasher!	lt.data6	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	01-15-2001 21:29