6110 DSP3 eeprom needed .... - GSM-Forum

joey · 03-02-2002, 00:24

Please, would someone be so kind to send me a 6110 DSP3 EEPROM, because I f*cked my 6110 by upgrading it from v4.05 to 5.38 and I do not have a backup from my original EEPROM :-(((( Now I've got 4 locks closed. Please send it to me (the best would be from a v4.05 or a version around it, but you can send any - I will try it) to the following address:

[email protected]

Thanx a lot to all in forward!

joey.

MySweetyLove · 03-02-2002, 02:33

Hi
You Don't even need a backup for the EEPROM since your eeprom data didn't change in flash proccess

About the four locks :
You can open these locks using nk_calc from dejan site

How to use it?
- Run computer in safe mode Windows 95/98/ME
- Run nk_calc
- Press F1 to CALC FAID for the new Software
- Press F2 to Correct the IMIE DATA if locks are EEEE FFFFFF EEEE if Exists
- Press F3 to Unlock the Four locks
You can get nk_calc from

http://users.net.yu/~dejan/download/nk_calc.zip

http://users.net.yu/~dejan/download/nk_calc.zip

I still can send you the EEPROM but you'll need to program it with another Programmer (SMD) or desolder it and Program it individually
BUT YOU'LL STILL NEED nk_CALC to CHANGE back your IMIE and tell the phone it's correct data
REGARDS

03-02-2002, 00:24	#1 (permalink)
joey Junior Member Join Date: May 2001 Posts: 7 Member: 4806 Status: Offline Thanks Meter: 0	6110 DSP3 eeprom needed .... Please, would someone be so kind to send me a 6110 DSP3 EEPROM, because I f*cked my 6110 by upgrading it from v4.05 to 5.38 and I do not have a backup from my original EEPROM :-(((( Now I've got 4 locks closed. Please send it to me (the best would be from a v4.05 or a version around it, but you can send any - I will try it) to the following address: [email protected] Thanx a lot to all in forward! joey.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6110 (DSP4) EEPROM File needed urgently	CarlosSantana2002	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	04-27-2006 12:09
6110 dsp3 v5.31 and 5.47 needed	Blueman1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-30-2002 06:06
6110 DSP3 eeprom needed ...	joey	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	03-03-2002 17:35
5110 DSP3 EEPROM needed :(	BrainShutdown	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	03-02-2002 03:01
help me 6110 DSP3 ,DSP4	vidas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	02-15-2002 01:51

03-02-2002, 02:33	#2 (permalink)
MySweetyLove Major Poster Join Date: Jan 2002 Location: Egypt Posts: 47 Member: 8387 Status: Offline Thanks Meter: 0	Hi You Don't even need a backup for the EEPROM since your eeprom data didn't change in flash proccess About the four locks : You can open these locks using nk_calc from dejan site How to use it? - Run computer in safe mode Windows 95/98/ME - Run nk_calc - Press F1 to CALC FAID for the new Software - Press F2 to Correct the IMIE DATA if locks are EEEE FFFFFF EEEE if Exists - Press F3 to Unlock the Four locks You can get nk_calc from http://users.net.yu/~dejan/download/nk_calc.zip http://users.net.yu/~dejan/download/nk_calc.zip I still can send you the EEPROM but you'll need to program it with another Programmer (SMD) or desolder it and Program it individually BUT YOU'LL STILL NEED nk_CALC to CHANGE back your IMIE and tell the phone it's correct data REGARDS