contact service after flash - GSM-Forum

abdulgani3 · 09-23-2003, 00:07

i flashed a3310 with no network, with v5.87 orig 4.45 now i get contact service after write. tried erasing flash with phoenix

Babak · 09-24-2003, 06:56

First Try To Repair IMEI And Locks With Nokia Tool by Rolis 1.8

If You Have The Same Still , Your Flash File Is Bad And You Have To Flashing Again With Other Flash Files.\

Syed · 09-24-2003, 08:11

or it is better if u first try to find where CS is coming from with eeprom tools, and then rectify the problem.

WBR
Syed

onedial · 09-25-2003, 19:51

I think is your flash file problem,pls change another flash file and flash it again.

abdulgani3 · 09-25-2003, 21:59

tried diff flash files no good.used knok to erase flash.tried many flases.could it be hardware.

Medz · 09-26-2003, 21:51

Yes it might be a hardware problem but at 1st be sure that the
phone is flashed properlly and u'will not change the version after
then reflow the cobba with good flux , recalculate , then reset to
factory settings ......ET Voila.

abdulgani3 · 09-28-2003, 04:13

sorry for being dumb but which programme to use to recalculateand reset factory settings. can only use nokia tool if phone comes on. boss i would much appreciate if you could me links for cracked version of windls and maestro.i just started repairing phones recently,got got with buying not working software,but thanks to you and this forum
peace.

Medz · 09-29-2003, 18:15

Well man U'r wellcom, U can use the ordinnary (Dejan1.2 flasher
+ Win DDP[WINdls] sofware,Or flasher 1.05 software).But it is
not good to use cracks or cracked software,cos that may reflectes on U'r buiseness If any problem still remaines just mail me.

Mikidutza · 10-07-2003, 18:51

1. Search for a good flash
2. Write it to phone usin knock by pheonix
3. Make SRF , SP , FAID with nokia tool
4. If problem pesist write a visgin eprom eprom (this may don't help)
5. reflow the coba or change it !

09-23-2003, 00:07	#1 (permalink)
abdulgani3 Junior Member Join Date: Aug 2003 Location: s.arica Posts: 30 Member: 37973 Status: Offline Thanks Meter: 0	contact service after flash i flashed a3310 with no network, with v5.87 orig 4.45 now i get contact service after write. tried erasing flash with phoenix

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
urgent 6100 contact service after flash	malta	Nokia Digital Core Technology 4 ( DCT-4 )	7	07-12-2009 05:19
how can i flash 7250i without get contact service after flash	makafy	Griffin	3	06-08-2005 17:38
7210 In Contact Service After Flash	malta	Nokia Digital Core Technology 4 ( DCT-4 )	24	07-31-2004 18:32
8310 contact service after flash	GYZMO	Nokia Digital Core Technology 4 ( DCT-4 )	5	08-01-2003 17:49

09-24-2003, 06:56	#2 (permalink)
Babak Freak Poster Join Date: Jun 2003 Posts: 221 Member: 32731 Status: Offline Thanks Meter: 1	First Try To Repair IMEI And Locks With Nokia Tool by Rolis 1.8 If You Have The Same Still , Your Flash File Is Bad And You Have To Flashing Again With Other Flash Files.\

09-24-2003, 08:11	#3 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	or it is better if u first try to find where CS is coming from with eeprom tools, and then rectify the problem. WBR Syed

09-25-2003, 19:51	#4 (permalink)
onedial Insane Poster Join Date: Apr 2003 Posts: 85 Member: 37052 Status: Offline Thanks Meter: 0	I think is your flash file problem,pls change another flash file and flash it again.

09-25-2003, 21:59	#5 (permalink)
abdulgani3 Junior Member Join Date: Aug 2003 Location: s.arica Posts: 30 Member: 37973 Status: Offline Thanks Meter: 0	tried diff flash files no good.used knok to erase flash.tried many flases.could it be hardware.

09-26-2003, 21:51	#6 (permalink)
Medz No Life Poster Join Date: Sep 2003 Age: 66 Posts: 807 Member: 39601 Status: Offline Thanks Meter: 13	Yes it might be a hardware problem but at 1st be sure that the phone is flashed properlly and u'will not change the version after then reflow the cobba with good flux , recalculate , then reset to factory settings ......ET Voila.

09-28-2003, 04:13	#7 (permalink)
abdulgani3 Junior Member Join Date: Aug 2003 Location: s.arica Posts: 30 Member: 37973 Status: Offline Thanks Meter: 0	sorry for being dumb but which programme to use to recalculateand reset factory settings. can only use nokia tool if phone comes on. boss i would much appreciate if you could me links for cracked version of windls and maestro.i just started repairing phones recently,got got with buying not working software,but thanks to you and this forum peace.

09-29-2003, 18:15	#8 (permalink)
Medz No Life Poster Join Date: Sep 2003 Age: 66 Posts: 807 Member: 39601 Status: Offline Thanks Meter: 13	Well man U'r wellcom, U can use the ordinnary (Dejan1.2 flasher + Win DDP[WINdls] sofware,Or flasher 1.05 software).But it is not good to use cracks or cracked software,cos that may reflectes on U'r buiseness If any problem still remaines just mail me.

10-07-2003, 18:51	#9 (permalink)
Mikidutza Insane Poster Join Date: Aug 2003 Location: Romania - Galati Age: 41 Posts: 72 Member: 36222 Status: Offline Thanks Meter: 0	1. Search for a good flash 2. Write it to phone usin knock by pheonix 3. Make SRF , SP , FAID with nokia tool 4. If problem pesist write a visgin eprom eprom (this may don't help) 5. reflow the coba or change it !