two 3210 - dead and half-alive.. - GSM-Forum

Rausch · 12-09-2003, 23:03

hi.

yesterday i got two Nokias 3210..

First: Half-alive. Sometimes catchin' network (one or two 'pieces' of signal), but usually - no network coverage.
And second - no light, no sound, simply doesn't switch on (battery's in order).

Now - what i have to do? Every phone has been bought for 250 russian roubles (heh.. 8 Euro). Have i to throw'em to window?

Excuse me for bad english - i studied german at school..........

taihv · 12-10-2003, 13:06

Are you a technical?
If the answe is NO, pls throw'em to window. OK? But if YES, post again!

Rausch · 12-10-2003, 13:38

post post post

Now what?
I will take screwdriver and search for damages..
EH!!!! Can i find damage in RF unit via EEPROM? I'm a Siemens flasher..

Medz · 12-10-2003, 18:59

Replace Z700 and see.

Rausch · 12-10-2003, 21:55

what's Z700?

dead phone works now 100% (damaged soldering - fixed).

taihv · 12-12-2003, 10:46

Congrulation!!!!!!!
First, u need a theory circuit chart for your phone, and then you can reflow the first and second IF filter, it placed at the bottom of mainboard. One is black at the right and the other smaller than have 3 pins at the left.
Good luck!

Rausch · 12-12-2003, 11:01

I have already service manual (07.99)
One hour ago i found NO connection between diplexer Z503 (top side, green, has 6 pins and 3 of 6 on GND) and antenna.
May be, phone has been stolen from ******** or were "out of condition". Cover isn't original.

taihv · 12-13-2003, 05:47

But did you solve problem?

Rausch · 12-15-2003, 15:07

A small small wire soldered. Connection with MTS provider established

. Phone's got out.
Thanx.

Now i searchin' for 6610 service manual (component layout)

And this topic will be killed in 3 days (all is correct?)

taihv · 12-16-2003, 08:30

I think you need find it from a collection of China, it supported for very very phone models and it also cheap too!

12-09-2003, 23:03	#1 (permalink)
Rausch Junior Member Join Date: Dec 2003 Location: Saint-Petersburg, Russia Age: 37 Posts: 5 Member: 45973 Status: Offline Thanks Meter: 0	two 3210 - dead and half-alive.. hi. yesterday i got two Nokias 3210.. First: Half-alive. Sometimes catchin' network (one or two 'pieces' of signal), but usually - no network coverage. And second - no light, no sound, simply doesn't switch on (battery's in order). Now - what i have to do? Every phone has been bought for 250 russian roubles (heh.. 8 Euro). Have i to throw'em to window? Excuse me for bad english - i studied german at school.......... Last edited by Rausch; 12-19-2003 at 11:49.

12-10-2003, 21:55	#5 (permalink)
Rausch Junior Member Join Date: Dec 2003 Location: Saint-Petersburg, Russia Age: 37 Posts: 5 Member: 45973 Status: Offline Thanks Meter: 0	what's Z700? dead phone works now 100% (damaged soldering - fixed). Last edited by Rausch; 12-11-2003 at 15:54.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
W510 dead after half unlock	cpu486	Smart-Clip	3	06-20-2008 08:29
Can be two cpu, two sim card, and working same time, but one imei?	stylius	Infinity-Box	8	05-16-2008 08:18
Sagem myC-3b dead and not alive	Mantikor	SMTi	11	11-20-2007 11:40
Confirmed: Server working! Dead K790i now alive and unlocked :)	-Wickings-	Universalbox	7	03-18-2007 00:01
3210 cable and 3210 SP Lock	chrisogrady	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	04-13-2000 21:35

12-10-2003, 13:06	#2 (permalink)
taihv Registered User Join Date: Oct 2003 Location: Vietnam Age: 47 Posts: 963 Member: 40808 Status: Offline Thanks Meter: 10	Are you a technical? If the answe is NO, pls throw'em to window. OK? But if YES, post again!

12-10-2003, 13:38	#3 (permalink)
Rausch Junior Member Join Date: Dec 2003 Location: Saint-Petersburg, Russia Age: 37 Posts: 5 Member: 45973 Status: Offline Thanks Meter: 0	post post post Now what? I will take screwdriver and search for damages.. EH!!!! Can i find damage in RF unit via EEPROM? I'm a Siemens flasher..

12-10-2003, 18:59	#4 (permalink)
Medz No Life Poster Join Date: Sep 2003 Age: 66 Posts: 807 Member: 39601 Status: Offline Thanks Meter: 13	Replace Z700 and see.

12-12-2003, 10:46	#6 (permalink)
taihv Registered User Join Date: Oct 2003 Location: Vietnam Age: 47 Posts: 963 Member: 40808 Status: Offline Thanks Meter: 10	Congrulation!!!!!!! First, u need a theory circuit chart for your phone, and then you can reflow the first and second IF filter, it placed at the bottom of mainboard. One is black at the right and the other smaller than have 3 pins at the left. Good luck!

12-12-2003, 11:01	#7 (permalink)
Rausch Junior Member Join Date: Dec 2003 Location: Saint-Petersburg, Russia Age: 37 Posts: 5 Member: 45973 Status: Offline Thanks Meter: 0	I have already service manual (07.99) One hour ago i found NO connection between diplexer Z503 (top side, green, has 6 pins and 3 of 6 on GND) and antenna. May be, phone has been stolen from ******** or were "out of condition". Cover isn't original.

12-13-2003, 05:47	#8 (permalink)
taihv Registered User Join Date: Oct 2003 Location: Vietnam Age: 47 Posts: 963 Member: 40808 Status: Offline Thanks Meter: 10	But did you solve problem?

12-15-2003, 15:07	#9 (permalink)
Rausch Junior Member Join Date: Dec 2003 Location: Saint-Petersburg, Russia Age: 37 Posts: 5 Member: 45973 Status: Offline Thanks Meter: 0	A small small wire soldered. Connection with MTS provider established . Phone's got out. Thanx. Now i searchin' for 6610 service manual (component layout) And this topic will be killed in 3 days (all is correct?)

12-16-2003, 08:30	#10 (permalink)
taihv Registered User Join Date: Oct 2003 Location: Vietnam Age: 47 Posts: 963 Member: 40808 Status: Offline Thanks Meter: 10	I think you need find it from a collection of China, it supported for very very phone models and it also cheap too!