Who can send me f_loader for 001F00C0 for erasing and writing!!! - GSM-Forum

starpho · 08-30-2001, 17:24

I have been tried to flash 3210v5.36 using ATMEL 16 f_loader and I always got the same message:Flash erasing error adress 260000,etc.The identity of FLASH is 001F00C0.Please,help.Thanks a lot!

Nofearcash · 08-30-2001, 23:44

hi

check your mail <img src="wink.gif" border="0"> reply if it works <img src="wink.gif" border="0">

bye NOfear

[MoOkIe] · 08-31-2001, 00:41

[quote]Originally posted by Nofearcash: hi

check your mail <img src="wink.gif" border="0"> reply if it works <img src="wink.gif" border="0">

bye NOfear<hr></blockquote>

Hi! Could you pls send it to me too??? Thanks in advance!

See ya all!

starpho · 09-03-2001, 01:12

Sorry,but it not works.It is an Atmel 16 FLASH,and i need for it the right Flash loader.Thanks in advance!!!!!!

DABOSS · 09-04-2001, 00:09

i also need this flash PLEASE!

Marsu168 · 09-12-2001, 08:22

try shell NX for dejan flasher... i flashing 3210 4.65 with this...

THEKILLER · 09-12-2001, 16:40

people, the floaders in the dark lemming 2.10 are actualized, use this flashes. <img src="cool.gif" border="0">

starpho · 09-13-2001, 02:06

I have been tried all f_loaders over the net,and I only have a problem with this FLASH.Maybe I need to change something in my PC cofiguration?I also have a problem with the latest version 5.28 of 8210,becouse the software don¨t recognize it.With other phones and other soft versions I don¨t have any problem.Regards!

misel · 09-13-2001, 21:45

I have the same problem with same flash ,,cant read ,,and erase is OK ,,but when start to writing return error ,,,and now phone is dead,,,I have bad MCU checksum in 20/30 part ,,,also trie several floader but nothing

Ledos · 09-14-2001, 03:46

Same problem here. I can make a backup (read), but when writing I get erase flash error. I have 3210 ver 5.36 en 6.00. Both with 001F00C0 flash. Any help ?

Ledos · 09-14-2001, 04:39

Solution: Make sure the battery is full. Use Dark Flasher Shell 210 or 211. model: 3210 version: your version, in my case 5.36 and 6.00 boot loader: 868 flash loader: atmel 16 now goto backup model: 3210 klik on flash and F1 read phone..... This should work. Check if the flash.out is not FF FF or 00 00 !

Now go back to the main menu and change the flash loader to atmel 8. Write the partial flash and all is done.

This worked for the 2 phones I have.

Altern8 · 09-19-2001, 08:41

Hi , I had this problem 3 mounts ago (when i want to write flasher detected error and phone was dead) Solution is don´t use only power power for your 74HCT from comport but use external pover +5V directly. This solution is 100% working for me, I hope that will for you too

mudboy · 09-19-2001, 19:44

I have got f_loader for this ID.

 Mail me for details.

Regards Mudboy

08-30-2001, 17:24	#1 (permalink)
starpho Freak Poster Join Date: Aug 2000 Posts: 144 Member: 1904 Status: Offline Thanks Meter: 3	Who can send me f_loader for 001F00C0 for erasing and writing!!! I have been tried to flash 3210v5.36 using ATMEL 16 f_loader and I always got the same message:Flash erasing error adress 260000,etc.The identity of FLASH is 001F00C0.Please,help.Thanks a lot!

08-30-2001, 23:44	#2 (permalink)
Nofearcash Crazy Poster Join Date: Jul 2001 Location: Germany Posts: 57 Member: 5421 Status: Offline Thanks Meter: 0	hi check your mail <img src="wink.gif" border="0"> <br />reply if it works <img src="wink.gif" border="0"> bye NOfear

08-31-2001, 00:41	#3 (permalink)
[MoOkIe] No Life Poster Join Date: Mar 2001 Location: Leiria, PT & *****, CN Posts: 2,514 Member: 3756 Status: Offline** Thanks Meter: 5	[quote]Originally posted by Nofearcash:<br /><strong>hi check your mail <img src="wink.gif" border="0"> <br />reply if it works <img src="wink.gif" border="0"> bye NOfear</strong><hr></blockquote> Hi!<br />Could you pls send it to me too??? <br />Thanks in advance! See ya all!

09-04-2001, 00:09	#5 (permalink)
DABOSS Freak Poster Join Date: Jun 2001 Location: London Age: 41 Posts: 489 Member: 4926 Status: Offline Thanks Meter: 5	i also need this flash<br />PLEASE!

09-12-2001, 08:22	#6 (permalink)
Marsu168 Freak Poster Join Date: Apr 2001 Location: BE Age: 56 Posts: 120 Member: 4173 Status: Offline Thanks Meter: 0	try shell NX for dejan flasher...<br />i flashing 3210 4.65 with this...

09-03-2001, 01:12	#4 (permalink)
starpho Freak Poster Join Date: Aug 2000 Posts: 144 Member: 1904 Status: Offline Thanks Meter: 3	Sorry,but it not works.It is an Atmel 16 FLASH,and i need for it the right Flash loader.Thanks in advance!!!!!!

09-12-2001, 16:40	#7 (permalink)
THEKILLER Freak Poster Join Date: Aug 2001 Location: Pombal, Portugal Posts: 223 Member: 5977 Status: Offline Thanks Meter: 1	people, the floaders in the dark lemming 2.10 are actualized, use this flashes.<br /> <img src="cool.gif" border="0">

09-13-2001, 02:06	#8 (permalink)
starpho Freak Poster Join Date: Aug 2000 Posts: 144 Member: 1904 Status: Offline Thanks Meter: 3	I have been tried all f_loaders over the net,and I only have a problem with this FLASH.Maybe I need to change something in my PC cofiguration?I also have a problem with the latest version 5.28 of 8210,becouse the software don¨t recognize it.With other phones and other soft versions I don¨t have any problem.Regards!

09-13-2001, 21:45	#9 (permalink)
misel No Life Poster Join Date: Apr 2000 Location: near you Age: 60 Posts: 560 Member: 1196 Status: Offline Thanks Meter: 6	I have the same problem with same flash ,,cant read ,,and erase is OK ,,but when start to writing return error ,,,and now phone is dead,,,I have bad MCU checksum in 20/30 part ,,,also trie several floader but nothing

09-14-2001, 03:46	#10 (permalink)
Ledos Major Poster Join Date: Mar 2001 Location: The Netherlands Posts: 40 Member: 3821 Status: Offline Thanks Meter: 1	Same problem here.<br />I can make a backup (read), but when writing I get erase flash error. I have 3210 ver 5.36 en 6.00. Both with 001F00C0 flash.<br />Any help ?

09-14-2001, 04:39	#11 (permalink)
Ledos Major Poster Join Date: Mar 2001 Location: The Netherlands Posts: 40 Member: 3821 Status: Offline Thanks Meter: 1	Solution:<br />Make sure the battery is full.<br />Use Dark Flasher Shell 210 or 211.<br />model: 3210<br />version: your version, in my case 5.36 and 6.00<br />boot loader: 868<br />flash loader: atmel 16<br />now goto backup<br />model: 3210<br />klik on flash and F1 read phone.....<br />This should work.<br />Check if the flash.out is not FF FF or 00 00 ! Now go back to the main menu and change the flash loader to atmel 8.<br />Write the partial flash and all is done. This worked for the 2 phones I have.

09-19-2001, 08:41	#12 (permalink)
Altern8 Junior Member Join Date: Apr 2001 Posts: 7 Member: 4216 Status: Offline Thanks Meter: 0	Hi , I had this problem 3 mounts ago (when i want to write flasher detected error and phone was dead) Solution is don´t use only power power for your 74HCT from comport but use external pover +5V directly. This solution is 100% working for me, I hope that will for you too

09-19-2001, 19:44	#13 (permalink)
mudboy No Life Poster Join Date: Apr 2001 Location: Czech Republic Posts: 1,059 Member: 4246 Status: Offline Thanks Meter: 9	I have got f_loader for this ID. <br />Mail me for details. Regards Mudboy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who can send me or help me to find flash file for GD70 v22A or similar???	starpho	Panasonic	0	10-11-2001 03:10
Who can send me or help me to find flash file for GD70 v22A or similar???	starpho	Panasonic	0	10-05-2001 02:38
Who can send me full or partial flash for c28v61 to put spanish language in it!!!	starpho	x1x to x45/x50	2	08-27-2001 09:02
Who can send me Spanish language pack for c28v61?	starpho	x1x to x45/x50	1	08-15-2001 04:02
who can send me working bin for roemmi?	asas	Motorola Old Legacy (EMMI)	5	08-11-2001 10:04