1110 [RH70] contact service after flash!!! - GSM-Forum

SLIPLOCK · 07-13-2006, 02:06

hi,
please i have a 1110 that i have to flash with ufs and 1100 cable and now says always "contact sevice".
i have flash like this:
MCU: rh70_04.030
PPM: rh70_04.03ae
CNT: rh70_nai04.03ae

please help...
i have try to erase with erase bouton before flashing, but not help.
someone has the erase file??

thanks

justm · 07-14-2006, 08:54

Yes, I also have same problem!!
Full flash, and also pm write!
First, it says insert sim then when you put simcard it says invalid sim
Then after you power off it says "contact service" again
Could someone please help!!

irfanamin2 · 07-14-2006, 09:03

Quote:

Originally Posted by SLIPLOCK

hi,
please i have a 1110 that i have to flash with ufs and 1100 cable and now says always "contact sevice".
i have flash like this:
MCU: rh70_04.030
PPM: rh70_04.03ae
CNT: rh70_nai04.03ae

please help...
i have try to erase with erase bouton before flashing, but not help.
someone has the erase file??

thanks

Try to flash old version and write good pm
Try below file Version
MCU: rh70_03.420
PPM: rh70_03.42ae
CNT: rh70_nai03.42ae

br

SLIPLOCK · 07-14-2006, 18:51

thanks for reply i will try that and post result...
the phone was 3.42 befor flashing....
regards

pphone · 07-14-2006, 19:38

Hi,
You must be use MT box for unlock or write firmware again with MT box krub,,,,,

Thailand........

c_ahmad79 · 07-14-2006, 20:35

Quote:

Originally Posted by SLIPLOCK

hi,
please i have a 1110 that i have to flash with ufs and 1100 cable and now says always "contact sevice".
i have flash like this:
MCU: rh70_04.030
PPM: rh70_04.03ae
CNT: rh70_nai04.03ae

please help...
i have try to erase with erase bouton before flashing, but not help.
someone has the erase file??

thanks

3.42 is 100% working soloution i fix many phone by this version.... use ufs griffen or mt-box or jaff........ this version work on these all.... try it

Master-GSM · 07-14-2006, 20:38

Quote:

Originally Posted by SLIPLOCK

hi,
please i have a 1110 that i have to flash with ufs and 1100 cable and now says always "contact sevice".
i have flash like this:
MCU: rh70_04.030
PPM: rh70_04.03ae
CNT: rh70_nai04.03ae

please help...
i have try to erase with erase bouton before flashing, but not help.
someone has the erase file??

thanks

Hello, u need to erease and then flash.....Erease will work when ur cell will be on local-mode....so bring ur cell on local-mode then press "Erease" after erease full flash it then write good PM after that do 3rd last and 2nd last options from UI settings.

BR

SLIPLOCK · 07-18-2006, 04:17

hi,
yes all is ok with 3.42 version.
the question is why phone ok with 3.42 and contact service with 4.03 and 4.04???
regards

blu angel · 07-18-2006, 04:34

It's because that is an old version, i mean the phone has an old version and cannot be written by higher version.

SLIPLOCK · 07-18-2006, 05:54

hum....i see ...
its good to know that...
perhaps different hardware for new model
regards

astralis · 07-19-2006, 16:03

It s happenned to me also with an 1110 phone after flash. In the phone was vers 4.04 I flashed with 3.42 fo rlanguage pack, all mcu and ppm and cnt and phone didin t work properly (some restart when accessing menu , etc). I put again the flash 4.04 and contact service. It is an explanation? the phone worked initial with 4.04 but I haven t language pack for this version installed and I put 3.42. After I downloaded 4.04 didn t work 4.04

cell2cell · 07-23-2006, 16:37

can some one help me im trying to fix a contact service on a 1110 with a 1110a cable what is out of chip bound is the vision too high

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320
Algorithm: u_amd.fia
Algorithm Ok, MSID: 84F9479CE7F13FC89F888A0172
Decoded MSID: 3E4EBAE9-00147BBE-AA000000
Encoded FAID: D4BC007E-55773230-AE456C75
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 00:29
Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:10
Area1: 0x011D0000-0x011DFFFF Erased, Time: 00:00
Area2: 0x011E0000-0x0137FFFF Erased, Time: 00:12
PPM Flashing Completed, Time: 00:08
Flashing Completed, Rebooting Mobile

TURNING POINT · 07-23-2006, 16:42

@cell2cell
try to downgrade flash(flash with v3.42)
Out of Chip Bounds this area no need for your fone..big size chips but file is small for 1110

Master-GSM · 07-24-2006, 10:52

Quote:

Originally Posted by cell2cell

can some one help me im trying to fix a contact service on a 1110 with a 1110a cable what is out of chip bound is the vision too high

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320
Algorithm: u_amd.fia
Algorithm Ok, MSID: 84F9479CE7F13FC89F888A0172
Decoded MSID: 3E4EBAE9-00147BBE-AA000000
Encoded FAID: D4BC007E-55773230-AE456C75
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 00:29
Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:10
Area1: 0x011D0000-0x011DFFFF Erased, Time: 00:00
Area2: 0x011E0000-0x0137FFFF Erased, Time: 00:12
PPM Flashing Completed, Time: 00:08
Flashing Completed, Rebooting Mobile

What version u using for Flash ?

U must full erease and then full flash it with 3.42 and then write good PM....

BR

karwos · 07-25-2006, 23:36

Write lower flash like 3.42 and make unlock through Codes

07-13-2006, 02:06	#1 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	1110 [RH70] contact service after flash!!! hi, please i have a 1110 that i have to flash with ufs and 1100 cable and now says always "contact sevice". i have flash like this: MCU: rh70_04.030 PPM: rh70_04.03ae CNT: rh70_nai04.03ae please help... i have try to erase with erase bouton before flashing, but not help. someone has the erase file?? thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1110, 1600, 2310 Contact Service After flash 100000% soution	Sandeep_$tomar	Nokia Hardware & Hardware Repair	56	11-14-2015 15:08
Nokia 1110 rh70 contact service solution 100%(INGS*****)	alammov	Nokia Hardware & Hardware Repair	10	02-15-2011 18:06
1110 contact service after flash but ok when boot from ufs	mobilemani	Nokia Digital Core Technology 4 ( DCT-4 )	11	07-09-2007 07:59
Nokia 1110 RH70 Contact Service	davesmobiles	Federal One	16	12-28-2006 05:36
how can i flash 7250i without get contact service after flash	makafy	Griffin	3	06-08-2005 17:38

07-14-2006, 08:54	#2 (permalink)
justm Freak Poster Join Date: May 2006 Posts: 217 Member: 269766 Status: Offline Thanks Meter: 12	Yes, I also have same problem!! Full flash, and also pm write! First, it says insert sim then when you put simcard it says invalid sim Then after you power off it says "contact service" again Could someone please help!!

07-14-2006, 18:51	#4 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	thanks for reply i will try that and post result... the phone was 3.42 befor flashing.... regards

07-14-2006, 19:38	#5 (permalink)
pphone Major Poster Join Date: Oct 2005 Posts: 47 Member: 194298 Status: Offline Thanks Meter: 3	Hi, You must be use MT box for unlock or write firmware again with MT box krub,,,,, Thailand........

07-18-2006, 04:17	#8 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	hi, yes all is ok with 3.42 version. the question is why phone ok with 3.42 and contact service with 4.03 and 4.04??? regards

07-18-2006, 04:34	#9 (permalink)
blu angel No Life Poster Join Date: Aug 2005 Location: Treasure Island of the pacific Posts: 601 Member: 168090 Status: Offline Thanks Meter: 92	It's because that is an old version, i mean the phone has an old version and cannot be written by higher version.

07-18-2006, 05:54	#10 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	hum....i see ... its good to know that... perhaps different hardware for new model regards

07-19-2006, 16:03	#11 (permalink)
astralis Freak Poster Join Date: Aug 2005 Location: Basarabia, Romania Posts: 250 Member: 174330 Status: Offline Sonork: 100.101441 Thanks Meter: 10	It s happenned to me also with an 1110 phone after flash. In the phone was vers 4.04 I flashed with 3.42 fo rlanguage pack, all mcu and ppm and cnt and phone didin t work properly (some restart when accessing menu , etc). I put again the flash 4.04 and contact service. It is an explanation? the phone worked initial with 4.04 but I haven t language pack for this version installed and I put 3.42. After I downloaded 4.04 didn t work 4.04

07-23-2006, 16:37	#12 (permalink)
cell2cell Freak Poster Join Date: Jun 2006 Posts: 264 Member: 299902 Status: Offline Thanks Meter: 20	can some one help me im trying to fix a contact service on a 1110 with a 1110a cable what is out of chip bound is the vision too high 1st Boot Ok, DCT4, UPP: 2201 Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320 Algorithm: u_amd.fia Algorithm Ok, MSID: 84F9479CE7F13FC89F888A0172 Decoded MSID: 3E4EBAE9-00147BBE-AA000000 Encoded FAID: D4BC007E-55773230-AE456C75 Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00 Area2: 0x01010000-0x013BFFFF Erased, Time: 00:29 Area3: 0x013C0000-0x013EFFFF Erased, Time: 00:01 Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds MCU Flashing Completed, Time: 00:10 Area1: 0x011D0000-0x011DFFFF Erased, Time: 00:00 Area2: 0x011E0000-0x0137FFFF Erased, Time: 00:12 PPM Flashing Completed, Time: 00:08 Flashing Completed, Rebooting Mobile

07-23-2006, 16:42	#13 (permalink)
TURNING POINT No Life Poster Join Date: Jul 2004 Location: Cuttack,India Age: 54 Posts: 946 Member: 71721 Status: Offline Sonork: 100.106320 Thanks Meter: 139	@cell2cell try to downgrade flash(flash with v3.42) Out of Chip Bounds this area no need for your fone..big size chips but file is small for 1110

07-25-2006, 23:36	#15 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	Write lower flash like 3.42 and make unlock through Codes