2610+2310 unlocker ! - GSM-Forum

mashmax · 02-03-2007, 13:18

Ive dowloaded this SW on a foriegn GSM forum and tested it on 2310 and 2610 . It did´nt work! It only can read SW-info and (sometimes) IMEI but does not unlock !
Please test it and poste result here!

--> Start time: 22:27:35
Reading phone information...
MCU Sw Version: V 3.21 20-07-06 RM-189 (c) NMP
IMEI Plain: 353653014248891
ASIC Type: 11
Unlocking...
Done.
--> End time: 22:27:39

Note: In case phone signal is drop, flash the phone with 'restore' file.

http://gsm-magic.org/MAHMUT1982/1110...UNLOCK%20SOFT/

sunsco · 02-06-2007, 11:43

hello jost flash phone with this flash file, it work ok

JAF version 1.98.4
Detected PKEY: 9000660F
Card life counter: 99.09%
P-key nokia module version 01.00
Detected JAF INTERFACE version: 01.AC
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
INI file .ini is missing. Continue searching for second ini type...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm189_03.310
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm189_03.31aa
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm1890_nai3.31aa
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Dannish,Norwegian,Swedish
MCU: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm189_03.310
Booting phone...
MCU ID: 0x2201
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.3B.00 -> Revision: 0007
Boot size is 0x0958
Boot is ready...
FLASH ID0: 00012A7E -> AMD Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x7E2A0100
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia
Loader version: 04.3B.00 -> Revision: 0007
Loader size is 0x6F48; Loader chk: c1
Loader is ready...
P-key nokia module version 01.00
MSID: 847BB878F509A91890A2134AD1
MSID decoded: 3E4EBAE900026189A8000000
FAID: 7B2DA6A529786BFF57F6DAA5
Operation took 0 minutes 14 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013BFFFF...
Erasing area: 013C0000 - 013EFFFF...
Erasing area: 017C0000 - 017EFFFF...
Erasing area: 01FC0000 - 01FEFFFF...
Operation took 0 minutes 27 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 13 seconds...
Restarting MCU...
PPM: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm189_03.31aa
Booting phone...
MCU ID: 0x2201
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.3B.00 -> Revision: 0007
Boot size is 0x0958
Boot is ready...
FLASH ID0: 00012A7E -> AMD Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x7E2A0100
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia
Loader version: 04.3B.00 -> Revision: 0007
Loader size is 0x6F48; Loader chk: c1
Loader is ready...
P-key nokia module version 01.00
MSID: 847BB878F509A91890A2134AD1
MSID decoded: 3E4EBAE900026189A8000000
FAID: 7B2DA6A529786BFF57F6DAA5
Operation took 0 minutes 13 seconds...
Erasing PPM...
Found 2 interval(s) to erase
Erasing area: 011E0000 - 011EFFFF...
Erasing area: 011F0000 - 0137FFFF...
Operation took 0 minutes 11 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 9 seconds...
Restarting MCU...
CNT: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm1890_nai3.31aa
Booting phone...
MCU ID: 0x2201
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.3B.00 -> Revision: 0007
Boot size is 0x0958
Boot is ready...
FLASH ID0: 00012A7E -> AMD Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x7E2A0100
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia
Loader version: 04.3B.00 -> Revision: 0007
Loader size is 0x6F48; Loader chk: c1
Loader is ready...
P-key nokia module version 01.00
MSID: 84591FCD877200DD6B2E43EAC3
MSID decoded: 3E4EBAE900026189AA000000
FAID: 17750B1221AE2B3A22E05842
Operation took 0 minutes 13 seconds...
Erasing Content Pack...
Found 1 interval(s) to erase
Erasing area: 01380000 - 013BFFFF...
Operation took 0 minutes 1 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 2 seconds...
Restarting MCU...
Operation took 0 minutes 0 seconds...
Flashing Done!
Operation took 1 minutes 47 seconds...

After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RM-189, Software version: 3.31
IMEI: 359746009230462
Product Code: 0541810
Resetting PPC...
Setting FULL FACTORY......Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 4 seconds...
Done!
Done!
Powering the phone...
Unlocking...
IMEI: 359746009230462
ASIC: 2
Selected flash file: C:\Program Files\Nokia\Phoenix\Products\rm-189\rm189_03.310
Decrypting flash...
Encrypting....
Unlock found!

MCU ID: 0x2201
Algo is ready...
Erasing area: 01160000 - 0116FFFF...
Unlocking...
Checking locks...

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

MCU ID: 0x2201
Algo is ready...
Erasing area: 01160000 - 0116FFFF...
Done!
DCT4 unlock counter: 315
Done!

tofuman · 02-06-2007, 16:29

you're talking about the fusion dct4 plus right.i'll give you a guide on How to unlock using fusion DCT4plus?

1. Phone must be flashed with MCU/PPM/CNT RH-93 V 5.53
2. Flash the phone with RH-93_V5.53.unlock
3. Unlock the Phone using Fusion DCT4plus
4. Flash the phone with RH-93_V5.53.restore (optional)
5. Phone is now Unlocked

Note: use UFS

mashmax · 02-07-2007, 13:13

Tahnks for replying!
What about unlocking 2610 without with this SW-I´m using UFS-does this SW work with 2610?

Formingus · 02-08-2007, 15:40

i buy the mt-box when i try to unlock th 2610 the folowing results are

Phone is in: Local mode
Scanning files, please wait...
Done
Selected Highest installed version: 04.51
Model: RH-86 ( 2610)
V 03.77/27-07-06/RH-86 (c) Nokia.
Production serial number KDN359244
Product code 0541576
Module code 0202930
Basic production code 0530409
Flash code
Order number
Long production SN
MCU SW V 03.77/27-07-06/RH-86/(c) Nokia.
HW 0603
PCI
UEM 1328
UPP 12352
RFIC 0500
DSP P05w45.v26
LCD ELBE
PPM V 03.77/27-07-06/RH-86_87/(c) Nokia. /AD
Content Pack Content: eplus_de/V 03.77/27-07-06/RH-86_87/(c) Nokia. /
IMEI: 352771013331525
WARNING: VPP pin is not connected, disabling VPP.
Phone is in: Local mode
Imei: 352771013331525
FAILED, check cable

what should i do

Formingus · 02-08-2007, 15:41

i buy the mt-box when i try to unlock th 2610 the folowing results are

Phone is in: Local mode
Scanning files, please wait...
Done
Selected Highest installed version: 04.51
Model: RH-86 ( 2610)
V 03.77/27-07-06/RH-86 (c) Nokia.
Production serial number KDN359244
Product code 0541576
Module code 0202930
Basic production code 0530409
Flash code
Order number
Long production SN
MCU SW V 03.77/27-07-06/RH-86/(c) Nokia.
HW 0603
PCI
UEM 1328
UPP 12352
RFIC 0500
DSP P05w45.v26
LCD ELBE
PPM V 03.77/27-07-06/RH-86_87/(c) Nokia. /AD
Content Pack Content: eplus_de/V 03.77/27-07-06/RH-86_87/(c) Nokia. /
IMEI: 35277101xxxxxxx
WARNING: VPP pin is not connected, disabling VPP.
Phone is in: Local mode
Imei: 35277101xxxxxxx
FAILED, check cable

the x are hiden numbers i have no problem with imei

what should i do

**sebagsm** · 02-08-2007, 16:25

i buy the mt-box when i try to unlock th 2610 the folowing results are

Phone is in: Local mode
Scanning files, please wait...
Done
Selected Highest installed version: 04.51
Model: RH-86 ( 2610)
V 03.77/27-07-06/RH-86 (c) Nokia.
Production serial number KDN359244
Product code 0541576
Module code 0202930
Basic production code 0530409
Flash code
Order number
Long production SN
MCU SW V 03.77/27-07-06/RH-86/(c) Nokia.
HW 0603
PCI
UEM 1328
UPP 12352
RFIC 0500
DSP P05w45.v26
LCD ELBE
PPM V 03.77/27-07-06/RH-86_87/(c) Nokia. /AD
Content Pack Content: eplus_de/V 03.77/27-07-06/RH-86_87/(c) Nokia. /
IMEI: 35277101xxxxxxx
WARNING: VPP pin is not connected, disabling VPP.
Phone is in: Local mode
Imei: 35277101xxxxxxx
FAILED, check cable <---------------------- THIS IS YOUR PROBLEM

the x are hiden numbers i have no problem with imei

what should i do

Formingus · 02-10-2007, 09:49

thenks for y answer but with same cable i have unlocked 1110
the cable is ip-nb easy 1110

**sebagsm** · 02-10-2007, 14:18

use fbus cable !!! I don't think it will work with easy ...

saifsourceit · 02-18-2007, 07:46

How do i unlock 2610 RH-86 using Tornado? is there any solution? or should i buy any other box for unlocking this? can i do it online?
Please help.
ThankX

rldalangin · 02-20-2007, 04:45

problem in unlocking 1112... the unit is v5.53, so flash it w/ 5.53unlock, unlock it to spunlock dct4+ ok and completed.. flash it again w/ 5.53restore... but still the phone ..LOCK and sim invalid.. HELP...

**sebagsm** · 02-20-2007, 12:52

Quote:

Originally Posted by rldalangin

problem in unlocking 1112... the unit is v5.53, so flash it w/ 5.53unlock, unlock it to spunlock dct4+ ok and completed.. flash it again w/ 5.53restore... but still the phone ..LOCK and sim invalid.. HELP...

buy jaf, mt, ub ... don't waste your time with this free unlock method

ymutala · 03-29-2007, 13:46

hello, after unlock nokia2610, i can get the signal.

help. thx

mophat · 06-14-2007, 09:16

i have a jaf box ...when i try to unlock it ask me to load a flash file ....when i read the codes...it fails ays code error...please help how do i unlock 2310 without flashing

boyagot · 06-14-2007, 09:26

Quote:

Originally Posted by ymutala

hello, after unlock nokia2610, i can get the signal.

help. thx

write PM file 2610

your problem will be solved!

02-03-2007, 13:18	#1 (permalink)
mashmax Insane Poster Join Date: Apr 2002 Location: Germany Posts: 89 Member: 10600 Status: Offline Thanks Meter: 0	2610+2310 unlocker ! Ive dowloaded this SW on a foriegn GSM forum and tested it on 2310 and 2610 . It did´nt work! It only can read SW-info and (sometimes) IMEI but does not unlock ! Please test it and poste result here! --> Start time: 22:27:35 Reading phone information... MCU Sw Version: V 3.21 20-07-06 RM-189 (c) NMP IMEI Plain: 353653014248891 ASIC Type: 11 Unlocking... Done. --> End time: 22:27:39 Note: In case phone signal is drop, flash the phone with 'restore' file. http://gsm-magic.org/MAHMUT1982/1110...UNLOCK%20SOFT/

02-07-2007, 13:13	#4 (permalink)
mashmax Insane Poster Join Date: Apr 2002 Location: Germany Posts: 89 Member: 10600 Status: Offline Thanks Meter: 0	Tahnks for replying! What about unlocking 2610 without with this SW-I´m using UFS-does this SW work with 2610? Last edited by mashmax; 02-08-2007 at 20:07.

02-08-2007, 15:40	#5 (permalink)
Formingus Banned Join Date: Jul 2006 Location: dword ptr [ebp-1C], edx Posts: 4,626 Member: 322417 Status: Offline Thanks Meter: 940	Somebody does have a solution i buy the mt-box when i try to unlock th 2610 the folowing results are Phone is in: Local mode Scanning files, please wait... Done Selected Highest installed version: 04.51 Model: RH-86 ( 2610) V 03.77/27-07-06/RH-86 (c) Nokia. Production serial number KDN359244 Product code 0541576 Module code 0202930 Basic production code 0530409 Flash code Order number Long production SN MCU SW V 03.77/27-07-06/RH-86/(c) Nokia. HW 0603 PCI UEM 1328 UPP 12352 RFIC 0500 DSP P05w45.v26 LCD ELBE PPM V 03.77/27-07-06/RH-86_87/(c) Nokia. /AD Content Pack Content: eplus_de/V 03.77/27-07-06/RH-86_87/(c) Nokia. / IMEI: 352771013331525 WARNING: VPP pin is not connected, disabling VPP. Phone is in: Local mode Imei: 352771013331525 FAILED, check cable what should i do

02-08-2007, 15:41	#6 (permalink)
Formingus Banned Join Date: Jul 2006 Location: dword ptr [ebp-1C], edx Posts: 4,626 Member: 322417 Status: Offline Thanks Meter: 940	Somebody does have a solution i buy the mt-box when i try to unlock th 2610 the folowing results are Phone is in: Local mode Scanning files, please wait... Done Selected Highest installed version: 04.51 Model: RH-86 ( 2610) V 03.77/27-07-06/RH-86 (c) Nokia. Production serial number KDN359244 Product code 0541576 Module code 0202930 Basic production code 0530409 Flash code Order number Long production SN MCU SW V 03.77/27-07-06/RH-86/(c) Nokia. HW 0603 PCI UEM 1328 UPP 12352 RFIC 0500 DSP P05w45.v26 LCD ELBE PPM V 03.77/27-07-06/RH-86_87/(c) Nokia. /AD Content Pack Content: eplus_de/V 03.77/27-07-06/RH-86_87/(c) Nokia. / IMEI: 35277101xxxxxxx WARNING: VPP pin is not connected, disabling VPP. Phone is in: Local mode Imei: 35277101xxxxxxx FAILED, check cable the x are hiden numbers i have no problem with imei what should i do

02-10-2007, 09:49	#8 (permalink)
Formingus Banned Join Date: Jul 2006 Location: dword ptr [ebp-1C], edx Posts: 4,626 Member: 322417 Status: Offline Thanks Meter: 940	hey bro thenks for y answer but with same cable i have unlocked 1110 the cable is ip-nb easy 1110

02-06-2007, 11:43	#2 (permalink)
sunsco Freak Poster Join Date: Jan 2006 Location: Nigeria Posts: 288 Member: 216438 Status: Offline Sonork: 160962 Thanks Meter: 31	hello jost flash phone with this flash file, it work ok JAF version 1.98.4 Detected PKEY: 9000660F Card life counter: 99.09% P-key nokia module version 01.00 Detected JAF INTERFACE version: 01.AC JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\ JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\ JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\ FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE ADSP Flash file: NONE APE Variant file: NONE APE User Flash file: NONE INI file .ini is missing. Continue searching for second ini type... Changing flashing settings... FILES SET FOR FLASHING: MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm189_03.310 PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm189_03.31aa CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm1890_nai3.31aa ADSP Flash file: NONE APE Variant file: NONE APE User Flash file: NONE Languages in ppm: English,Dannish,Norwegian,Swedish MCU: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm189_03.310 Booting phone... MCU ID: 0x2201 BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia Loader version: 04.3B.00 -> Revision: 0007 Boot size is 0x0958 Boot is ready... FLASH ID0: 00012A7E -> AMD Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10 FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0 First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14 Flash ID is 0x7E2A0100 Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia Loader version: 04.3B.00 -> Revision: 0007 Loader size is 0x6F48; Loader chk: c1 Loader is ready... P-key nokia module version 01.00 MSID: 847BB878F509A91890A2134AD1 MSID decoded: 3E4EBAE900026189A8000000 FAID: 7B2DA6A529786BFF57F6DAA5 Operation took 0 minutes 14 seconds... Erasing... Found 5 interval(s) to erase Erasing area: 01000000 - 0100FFFF... Erasing area: 01010000 - 013BFFFF... Erasing area: 013C0000 - 013EFFFF... Erasing area: 017C0000 - 017EFFFF... Erasing area: 01FC0000 - 01FEFFFF... Operation took 0 minutes 27 seconds... Writing... Perm. Data Restore OK Operation took 0 minutes 13 seconds... Restarting MCU... PPM: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm189_03.31aa Booting phone... MCU ID: 0x2201 BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia Loader version: 04.3B.00 -> Revision: 0007 Boot size is 0x0958 Boot is ready... FLASH ID0: 00012A7E -> AMD Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10 FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0 First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14 Flash ID is 0x7E2A0100 Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia Loader version: 04.3B.00 -> Revision: 0007 Loader size is 0x6F48; Loader chk: c1 Loader is ready... P-key nokia module version 01.00 MSID: 847BB878F509A91890A2134AD1 MSID decoded: 3E4EBAE900026189A8000000 FAID: 7B2DA6A529786BFF57F6DAA5 Operation took 0 minutes 13 seconds... Erasing PPM... Found 2 interval(s) to erase Erasing area: 011E0000 - 011EFFFF... Erasing area: 011F0000 - 0137FFFF... Operation took 0 minutes 11 seconds... Writing... Perm. Data Restore OK Operation took 0 minutes 9 seconds... Restarting MCU... CNT: C:\Program Files\Nokia\Phoenix\Products\RM-189\rm1890_nai3.31aa Booting phone... MCU ID: 0x2201 BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia Loader version: 04.3B.00 -> Revision: 0007 Boot size is 0x0958 Boot is ready... FLASH ID0: 00012A7E -> AMD Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10 FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0 First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14 Flash ID is 0x7E2A0100 Flash loader is C:\Program Files\ODEON\JAF\Flash\u_amd.fia Loader version: 04.3B.00 -> Revision: 0007 Loader size is 0x6F48; Loader chk: c1 Loader is ready... P-key nokia module version 01.00 MSID: 84591FCD877200DD6B2E43EAC3 MSID decoded: 3E4EBAE900026189AA000000 FAID: 17750B1221AE2B3A22E05842 Operation took 0 minutes 13 seconds... Erasing Content Pack... Found 1 interval(s) to erase Erasing area: 01380000 - 013BFFFF... Operation took 0 minutes 1 seconds... Writing... Perm. Data Restore OK Operation took 0 minutes 2 seconds... Restarting MCU... Operation took 0 minutes 0 seconds... Flashing Done! Operation took 1 minutes 47 seconds... After flash processing... Waiting for phone to boot... Reading... Phone type: RM-189, Software version: 3.31 IMEI: 359746009230462 Product Code: 0541810 Resetting PPC... Setting FULL FACTORY......Setting test mode... Setting FULL FACTORY... Operation took 0 minutes 4 seconds... Done! Done! Powering the phone... Unlocking... IMEI: 359746009230462 ASIC: 2 Selected flash file: C:\Program Files\Nokia\Phoenix\Products\rm-189\rm189_03.310 Decrypting flash... Encrypting.... Unlock found! MCU ID: 0x2201 Algo is ready... Erasing area: 01160000 - 0116FFFF... Unlocking... Checking locks... Block 1: Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN MCU ID: 0x2201 Algo is ready... Erasing area: 01160000 - 0116FFFF... Done! DCT4 unlock counter: 315 Done!

02-06-2007, 16:29	#3 (permalink)
tofuman Junior Member Join Date: Jan 2007 Posts: 6 Member: 443137 Status: Offline Thanks Meter: 0	you're talking about the fusion dct4 plus right.i'll give you a guide on How to unlock using fusion DCT4plus? 1. Phone must be flashed with MCU/PPM/CNT RH-93 V 5.53 2. Flash the phone with RH-93_V5.53.unlock 3. Unlock the Phone using Fusion DCT4plus 4. Flash the phone with RH-93_V5.53.restore (optional) 5. Phone is now Unlocked Note: use UFS

02-08-2007, 16:25	#7 (permalink)
sebagsm Moderator Join Date: Sep 2002 Location: Serbia/Hungary Age: 42 Posts: 1,043 Member: 15994 Status: Offline Thanks Meter: 263	i buy the mt-box when i try to unlock th 2610 the folowing results are Phone is in: Local mode Scanning files, please wait... Done Selected Highest installed version: 04.51 Model: RH-86 ( 2610) V 03.77/27-07-06/RH-86 (c) Nokia. Production serial number KDN359244 Product code 0541576 Module code 0202930 Basic production code 0530409 Flash code Order number Long production SN MCU SW V 03.77/27-07-06/RH-86/(c) Nokia. HW 0603 PCI UEM 1328 UPP 12352 RFIC 0500 DSP P05w45.v26 LCD ELBE PPM V 03.77/27-07-06/RH-86_87/(c) Nokia. /AD Content Pack Content: eplus_de/V 03.77/27-07-06/RH-86_87/(c) Nokia. / IMEI: 35277101xxxxxxx WARNING: VPP pin is not connected, disabling VPP. Phone is in: Local mode Imei: 35277101xxxxxxx FAILED, check cable <---------------------- THIS IS YOUR PROBLEM the x are hiden numbers i have no problem with imei what should i do

02-10-2007, 14:18	#9 (permalink)
sebagsm Moderator Join Date: Sep 2002 Location: Serbia/Hungary Age: 42 Posts: 1,043 Member: 15994 Status: Offline Thanks Meter: 263	use fbus cable !!! I don't think it will work with easy ...

02-18-2007, 07:46	#10 (permalink)
saifsourceit Insane Poster Join Date: Feb 2007 Location: Dubai Posts: 79 Member: 446828 Status: Offline Thanks Meter: 0	How do i unlock 2610 RH-86 using Tornado? is there any solution? or should i buy any other box for unlocking this? can i do it online? Please help. ThankX

02-20-2007, 04:45	#11 (permalink)
rldalangin Junior Member Join Date: Aug 2006 Posts: 33 Member: 341244 Status: Offline Thanks Meter: 3	problem in unlocking 1112... the unit is v5.53, so flash it w/ 5.53unlock, unlock it to spunlock dct4+ ok and completed.. flash it again w/ 5.53restore... but still the phone ..LOCK and sim invalid.. HELP...

03-29-2007, 13:46	#13 (permalink)
ymutala Freak Poster Join Date: Aug 2006 Posts: 101 Member: 323830 Status: Offline Thanks Meter: 3	hello, after unlock nokia2610, i can get the signal. help. thx

06-14-2007, 09:16	#14 (permalink)
mophat Freak Poster Join Date: Jul 2006 Location: lusaka Posts: 279 Member: 320108 Status: Offline Thanks Meter: 18	i have a jaf box ...when i try to unlock it ask me to load a flash file ....when i read the codes...it fails ays code error...please help how do i unlock 2310 without flashing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Insert sim solution 1110,1112,1600,2310,2610,2310,Final	Dooha_Bd	Nokia Hardware & Hardware Repair	9	03-15-2010 04:30
FREE Unlock 2610, 2310, 1112, 1110i	GSMARMOON	Nokia Digital Core Technology 4 ( DCT-4 )	42	05-13-2007 00:19
..:just 2610 2310 1112 unlocking flashing:..	..::hotlovercool4::..	Nokia Digital Core Technology 4 ( DCT-4 )	9	02-12-2007 10:00
.:Elcotek Telecom:. New Nokia 1112 2610 2310, Bird S199 Unlocking in India, New Delhi	nonu_don	Main Sales Section	0	10-26-2006 15:35
1112,2610,2310 ,unlock In Sydney	nik	Main Sales Section	0	10-07-2006 10:59