6230 flashing problems - GSM-Forum

jazzcomms · 10-03-2005, 21:52

flashing 6230 with ufs3. nokia software v 5.26, get the following message

1st Boot Ok, TIKU, UPP: 1052
Fl0: 0x00000000-0x00FFFFFF,00EC22F8,Sam K8S2815ET
Fl1: 0x02000000-0x027FFFFF,00EC0039,Sam KEE00E00CM
Algorithm: te_amd_b.fia
Algorithm Ok, MSID: 845799441EE74182DB77F25706
Decoded MSID: DC74BAE9-0008D98C-A8000000
Encoded FAID: 4953BDD6-58C4A950-D0E33D89
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 01:34
Area3: 0x00800000-0x0093FFFF Erased, Time: 00:15
Area4: 0x00B60000-0x00FEFFFF Erased, Time: 00:52
MCU Flashing Completed, Time: 00:47
Area1: 0x00940000-0x00B3FFFF Erased, Time: 00:24
CNT Flashing Completed, Time: 00:08
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

i have flashed another 6230 using the same setting and everything is ok. the reason that i am flashing this phone is because there is nothing in the gallery folder . anyone help please

x_gsm · 10-07-2005, 18:35

I have the same problem

Have ou solved?

leosedf · 10-07-2005, 18:40

Try to flash whithout the contents package (CNT) and then post results
You may need to format the user area and upload THE CORRECT CNT package

recepoz · 10-07-2005, 18:44

try to press on/off switch in here..

CNT Flashing Completed, Time: 00:08
Extracting Contents Package ...
Init Local Mode Failed

leosedf · 10-07-2005, 18:52

@recepoz
no need to press it. the proccess is allready failed, the power switch is useless at that point (only when powering phone.. if you have cable problem)

recepoz · 10-07-2005, 19:32

Quote:

Originally Posted by leosedf

@recepoz
no need to press it. the proccess is allready failed, the power switch is useless at that point (only when powering phone.. if you have cable problem)

i have repair lots of phones with this way

leosedf · 10-07-2005, 19:55

hmmm maybe you have right
because in this stage "Init Local Mode Failed" i mean before this if you press power then the phone goes to local mode...
maybe...
but it also happens if you try to use wrong CNT file

aqeel_phool · 08-08-2006, 17:24

if software is ok phone flashed normally but ui setting failed like other models

elmostapd1980 · 08-08-2006, 20:03

flash it with jaf it tested by me

10-03-2005, 21:52	#1 (permalink)
jazzcomms Major Poster Join Date: Jul 2004 Age: 75 Posts: 47 Member: 75261 Status: Offline Thanks Meter: 0	6230 flashing problems flashing 6230 with ufs3. nokia software v 5.26, get the following message 1st Boot Ok, TIKU, UPP: 1052 Fl0: 0x00000000-0x00FFFFFF,00EC22F8,Sam K8S2815ET Fl1: 0x02000000-0x027FFFFF,00EC0039,Sam KEE00E00CM Algorithm: te_amd_b.fia Algorithm Ok, MSID: 845799441EE74182DB77F25706 Decoded MSID: DC74BAE9-0008D98C-A8000000 Encoded FAID: 4953BDD6-58C4A950-D0E33D89 Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00 Area2: 0x00010000-0x007FFFFF Erased, Time: 01:34 Area3: 0x00800000-0x0093FFFF Erased, Time: 00:15 Area4: 0x00B60000-0x00FEFFFF Erased, Time: 00:52 MCU Flashing Completed, Time: 00:47 Area1: 0x00940000-0x00B3FFFF Erased, Time: 00:24 CNT Flashing Completed, Time: 00:08 Extracting Contents Package ... Init Local Mode Failed Contents Package Extracting Failed: Process Failed, Repowering Mobile i have flashed another 6230 using the same setting and everything is ok. the reason that i am flashing this phone is because there is nothing in the gallery folder . anyone help please

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6230 flashing problem	pezus1	Federal One	3	07-05-2005 15:05
6230 flashing problem	Bmt_HR	Griffin	4	11-08-2004 18:54
6230 flashing problem	servisgsm	Trisha & Matrix Flasher	2	09-08-2004 14:27
6230 flashing problems	zoki	Griffin	3	07-17-2004 12:52
6230 flashing problem!!!bug in griffin box	stanl_c	Griffin	5	04-25-2004 15:15

10-07-2005, 18:35	#2 (permalink)
x_gsm Freak Poster Join Date: Aug 2004 Location: Slovenia Age: 45 Posts: 255 Member: 79782 Status: Offline Thanks Meter: 7	I have the same problem Have ou solved?

10-07-2005, 18:40	#3 (permalink)
leosedf No Life Poster Join Date: Jul 2003 Location: Thessaloniki,Hellas Age: 44 Posts: 1,013 Member: 33547 Status: Offline Thanks Meter: 17	Try to flash whithout the contents package (CNT) and then post results You may need to format the user area and upload THE CORRECT CNT package

10-07-2005, 18:44	#4 (permalink)
recepoz Freak Poster Join Date: Aug 2005 Age: 43 Posts: 333 Member: 167500 Status: Offline Thanks Meter: 16	try to press on/off switch in here.. CNT Flashing Completed, Time: 00:08 Extracting Contents Package ... Init Local Mode Failed

10-07-2005, 18:52	#5 (permalink)
leosedf No Life Poster Join Date: Jul 2003 Location: Thessaloniki,Hellas Age: 44 Posts: 1,013 Member: 33547 Status: Offline Thanks Meter: 17	@recepoz no need to press it. the proccess is allready failed, the power switch is useless at that point (only when powering phone.. if you have cable problem)

10-07-2005, 19:55	#7 (permalink)
leosedf No Life Poster Join Date: Jul 2003 Location: Thessaloniki,Hellas Age: 44 Posts: 1,013 Member: 33547 Status: Offline Thanks Meter: 17	hmmm maybe you have right because in this stage "Init Local Mode Failed" i mean before this if you press power then the phone goes to local mode... maybe... but it also happens if you try to use wrong CNT file

08-08-2006, 17:24	#8 (permalink)
aqeel_phool Freak Poster Join Date: Apr 2006 Location: Keep Guessing Age: 36 Posts: 102 Member: 265266 Status: Offline Thanks Meter: 6	if software is ok phone flashed normally but ui setting failed like other models

08-08-2006, 20:03	#9 (permalink)
elmostapd1980 Registered User Join Date: Oct 2005 Location: e g y p t Age: 43 Posts: 427 Member: 194178 Status: Offline Sonork: 100.1594302 Thanks Meter: 34	flash it with jaf it tested by me