6600 Dead - GSM-Forum

marukiaro · 02-23-2004, 20:25

Hi all,
The firmware flash procedure stopped while writing the MCU ... now the prodigy prg says : "unable to set the phone in DCT4 mode".
what can i do ?

Royslade · 02-23-2004, 20:33

Hi,
maybe the service cable I think. Is there a 3,3 K resistor in BSI line?

BR.

marukiaro · 02-23-2004, 20:35

well, yes. it's a griffin cable. But It started before.
The flashing process hung saying something like "error writing block 0xXXXXXX"
And now it doesn't start anymore

marukiaro · 02-23-2004, 21:11

SOLVED !!!
Took out and in the Power plug from the prodigy, now the flash procedure can start again.

marukiaro · 02-23-2004, 22:30

Does anyone know where I can find italian language in the PPM that comes out with 3.49.1 version of the 6600 firmware?
I have 2 PPM files: .50 and .51 but both of them are for english/german/french.

Thx in advance

02-23-2004, 22:52

Use 3.42.

marukiaro · 02-23-2004, 23:20

@legija
that's incredible ... are you saying that there is no italian 6600 PPM for 3.48 or 3.49 ?

marukiaro · 02-24-2004, 00:26

yeah, you were right. I've found this doc somewhere

02-23-2004, 20:25	#1 (permalink)
marukiaro Junior Member Join Date: Jul 2003 Location: Naples (Italy) Posts: 39 Member: 33792 Status: Offline Thanks Meter: 0	6600 Dead Hi all, The firmware flash procedure stopped while writing the MCU ... now the prodigy prg says : "unable to set the phone in DCT4 mode". what can i do ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 6600 dead taking flashing,but still dead	sandeepmtc	Nokia Hardware & Hardware Repair	0	08-24-2007 17:53
6600 flashing error now 6600 dead	kabeermaster25	Nokia Hardware & Hardware Repair	25	04-08-2006 02:31
6600 dead..........	zdob	Griffin	16	11-08-2004 09:38
6600 Dead says Error[44449000]	deepgsm	Griffin	0	04-30-2004 11:52
6600 dead after flashing with new 4.09.1	mohd_anan	WD2 & APE (Symbian Phones)	7	04-26-2004 06:55

02-23-2004, 20:33	#2 (permalink)
Royslade No Life Poster Join Date: Aug 2002 Age: 57 Posts: 769 Member: 14515 Status: Offline Sonork: 100.77248 Thanks Meter: 15	Hi, maybe the service cable I think. Is there a 3,3 K resistor in BSI line? BR.

02-23-2004, 20:35	#3 (permalink)
marukiaro Junior Member Join Date: Jul 2003 Location: Naples (Italy) Posts: 39 Member: 33792 Status: Offline Thanks Meter: 0	well, yes. it's a griffin cable. But It started before. The flashing process hung saying something like "error writing block 0xXXXXXX" And now it doesn't start anymore

02-23-2004, 21:11	#4 (permalink)
marukiaro Junior Member Join Date: Jul 2003 Location: Naples (Italy) Posts: 39 Member: 33792 Status: Offline Thanks Meter: 0	SOLVED !!! Took out and in the Power plug from the prodigy, now the flash procedure can start again.

02-23-2004, 22:30	#5 (permalink)
marukiaro Junior Member Join Date: Jul 2003 Location: Naples (Italy) Posts: 39 Member: 33792 Status: Offline Thanks Meter: 0	Does anyone know where I can find italian language in the PPM that comes out with 3.49.1 version of the 6600 firmware? I have 2 PPM files: .50 and .51 but both of them are for english/german/french. Thx in advance

02-23-2004, 22:52	#6 (permalink)
legija Guest Posts: n/a Member:	Use 3.42.

02-23-2004, 23:20	#7 (permalink)
marukiaro Junior Member Join Date: Jul 2003 Location: Naples (Italy) Posts: 39 Member: 33792 Status: Offline Thanks Meter: 0	@legija that's incredible ... are you saying that there is no italian 6600 PPM for 3.48 or 3.49 ?