Flash & Uem Imei - Page 5 - GSM-Forum

german gsm team · 01-13-2005, 00:22

Quote:

Originally Posted by ficho

How come a Insane Poster Dejan Kaljevic makes so much noice when he apears ?

Answer : Lot of dogs barking arround!

regards ficho

I assume that you don't know who Dejan is! He's KING of Nokia, of it's phones, of it's flash and security algorithms. OK?!

GSM Coolhawk · 01-13-2005, 00:27

Quote:

Originally Posted by ficho

How come a Insane Poster Dejan Kaljevic makes so much noice when he apears ?

Answer : Lot of dogs barking arround!

regards ficho

And howcome a "Freak Poster" like you with more posts than Dejan are making useless and nonsense post with no connection to this topic ? Just wondering.....

And as for what you call "noise" well lets see what the future brings, no question as to what he can do, the question is will he !

Regards

Keke · 01-13-2005, 07:59

Quote:

Originally Posted by ficho

How come a Insane Poster Dejan Kaljevic makes so much noice when he apears ?

Answer : Lot of dogs barking arround!

regards ficho

I couldn't have been a mod here , you should imagine what would have happen to your ip .

You register 2001 , what have you done to who , who even knows you .
Who have you help here.

Please don't derail a discution from a giant .

MaFiaaa · 01-13-2005, 09:45

Quote:

Originally Posted by ficho

How come a Insane Poster Dejan Kaljevic makes so much noice when he apears ?

Answer : Lot of dogs barking arround!

regards ficho

very funny
u make a big mistake

MACKIE · 01-13-2005, 14:04

Quote:

Originally Posted by ficho

How come a Insane Poster Dejan Kaljevic makes so much noice when he apears ?

Answer : Lot of dogs barking arround!

regards ficho

M8 are you working with "GSM PHONES" or with BANANA'S......

Hehehe.....Insane Poster......

Regards
Mackie

Alkapone · 01-13-2005, 15:32

Ok, all of you f....d ficho, now, please, would be very nice to hear from Dejan or Zulea (because I think that both are smart people) about IMEI change on DCT4 without changing UEM. Is it possible, to reset UEM, or maybe need to patch flash, like in siemens? But for that we need to find DCT-4 algo ...

B.R.
Alkapone

ficho · 01-13-2005, 16:08

well it seems that most of the members here didn't get my point..

I do know who Dejan is etc etc... I have spoked with him about dct3 custom ppm many many years ago .... even before this forum was up and running

ficho

ficho · 01-13-2005, 16:12

>>You register 2001 , what have you done to who , who even knows you .
>>Who have you help here.

Ask Willy does he know ficho maybe and since when ? since most of you know willy very very well..
ficho

i learn many things from Ficho, he give me full version how to use the Net Moniter for DCT2 and DCT3 ! and i always remember people who help me before ! Best Regards Willy

Platijet · 01-13-2005, 16:18

Quote:

Originally Posted by Alkapone

about IMEI change on DCT4 without changing UEM. Is it possible, to reset UEM, or maybe need to patch flash, like in siemens? But for that we need to find DCT-4 algo ...

B.R.
Alkapone

agree with you.i think this can be done only with patched or modified FW(to disable OTP imei)

Keke · 01-13-2005, 17:08

Quote:

Originally Posted by platijet

agree with you.i think this can be done only with patched or modified FW(to disable OTP imei)

Exactly what Dejan is talking about , and I think this is availlable almost two years now since he posted for the first time. Most important thing to do is to figure out or to work out how to fetch maped sector(blocked) in the rom as algo is free for for everybody .

Tinotenda · 01-13-2005, 17:28

all we vultures can do is wait for the kings to make their moves, and eat the leftovers...

zulea · 01-13-2005, 22:22

@ Dejan - aka Serbian Monkey

It's allready started.
HE, HE, HE, people start making money using your ideas.
As you can see from specifications, it's a "partial flasher" who change IMEI check

Prices that I got is 5.000$

Have a nice day,
Zulea

Just look here (and also look attached screenshots):

/************************************************** */
/************************************************** */

Precious for Nokia DCT4 V 1.0.0.6

This is the first in the world standalone software that
can change IMEI number of a Nokia DCT4 phones to any
digit without UEM change.

/************************************************** */
Supported DCT4 phones for this release:

- NHM-7 - V 06.20
- RH-19 - V 05.91
- NHL-6 - V 3.14
- RH-9 - V 05.35
- RM-17 - V 03.36
- NEM-1 - V 4.62
- NPL-2 - V 05.80
- RH-23 - V 4.26
- NHL-4J - V 3.62
- NPE-4 - V 05.10
- NHL-4 - V 5.63
- NPL-1 - V 7.00
- RH-37 - V 03.60
- RM-37 - V 4.10
- NHM-8 - V 5.02

/************************************************** */

Preffered operating system - Microsoft Windows XP SP2

How to use:

1. Connect the box to the USB. You will need to install
the driver on first connection of the box.

2. Start the software and and wait the 'OK' button to
become active.

3. Enter the password for your box. If you enter wrong
password on next start up you will see that you have left
less attempts. If you enter wrong password 5 times you box
will self destruct.

4.When you press enter you should wait 10-15 seconds for
the box initilization to finish. Now you are ready to use.

5. Connect the phone with Griffin or UFS service
cable to the box. You have to read the phone with 'Check'
button to make sure its supported. We recommend that you
flash the phone before IMEI change with correct supported
version if the one you have is different.

6. When you read the phone the IMEI will display in the
text box where you can edit it to any digit. Dont forget the
format you enter should be XXXXXX-XX-XXXXXX ( 14 digits, no
check digit!).

7. Press 'Write' and wait some 40 seconds while the new
IMEI is written to the phone. The simlocks will be written
after IMEI change, so you will have fully working phone
after that.

/************************************************** */

This program works only on DCT4 phones that have valid software
with valid UEM and Flash IMEI data ! This program is not intended
to create identity on blank boards or restore imei on phones
after Flash chip change. Make sure your phone is working before
using the program.

/************************************************** */
/************************************************** */

Just check other screenshoots in next message.

zulea · 01-13-2005, 22:25

@Dejan - aka Serbian Monkey

.... next screenshoots of your XX*5k lost

Have a nice day,
Zulea

g3gg0 · 01-13-2005, 22:28

@dejan:

thank you very much

you have me some hints i will have a eye on
just curious what the boot mode will cause...
but i will try that

thanks!

jatjag · 01-13-2005, 22:42

hi,dejan when we had any problem we think only you can solve it. thanks for your help uptill now.make it continue.gsm team had made enough money uptill now.they did not thoght about you.if you won't crack this rpl s.w some body in futer will crack it & he will take all credit.as far as i think we all love you & i will newer wish others name for this. after all money is not everything in life.

01-13-2005, 16:12	#68 (permalink)
ficho Freak Poster Join Date: Oct 2001 Posts: 141 Member: 7054 Status: Offline Thanks Meter: 1	>>You register 2001 , what have you done to who , who even knows you . >>Who have you help here. Ask Willy does he know ficho maybe and since when ? since most of you know willy very very well.. ficho i learn many things from Ficho, he give me full version how to use the Net Moniter for DCT2 and DCT3 ! and i always remember people who help me before ! Best Regards Willy Last edited by willy; 01-14-2005 at 00:41.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to check flash imei or uem imei without local mode	ashish mobile	Nokia Hardware & Hardware Repair	1	11-27-2009 05:01
UEM IMEI not readed Asic 11,1200,1208 & 1650 Problem solution	JHON_DREAM	Nokia Digital Core Technology 4 ( DCT-4 )	36	08-02-2009 11:21
E720 problem with flashing & rebuilding imei	blinet	Twisterflasher	1	12-17-2005 17:37
IMEI FLASH or UEM+FLASH	mr_rocco	Griffin	0	12-05-2004 22:10

01-13-2005, 15:32	#66 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	Ok, all of you f....d ficho, now, please, would be very nice to hear from Dejan or Zulea (because I think that both are smart people) about IMEI change on DCT4 without changing UEM. Is it possible, to reset UEM, or maybe need to patch flash, like in siemens? But for that we need to find DCT-4 algo ... B.R. Alkapone

01-13-2005, 16:08	#67 (permalink)
ficho Freak Poster Join Date: Oct 2001 Posts: 141 Member: 7054 Status: Offline Thanks Meter: 1	well it seems that most of the members here didn't get my point.. I do know who Dejan is etc etc... I have spoked with him about dct3 custom ppm many many years ago .... even before this forum was up and running ficho

01-13-2005, 17:28	#71 (permalink)
Tinotenda No Life Poster Join Date: Dec 2003 Location: Harare, Zimbabwe/ South Africa Age: 44 Posts: 1,110 Member: 46546 Status: Offline Sonork: 100.1577435 Thanks Meter: 85	all we vultures can do is wait for the kings to make their moves, and eat the leftovers...

01-13-2005, 22:28	#74 (permalink)
g3gg0 Insane Poster Join Date: Apr 2004 Location: no Posts: 73 Member: 61288 Status: Offline Thanks Meter: 45	@dejan: thank you very much you have me some hints i will have a eye on just curious what the boot mode will cause... but i will try that thanks!

01-13-2005, 22:42	#75 (permalink)
jatjag No Life Poster Join Date: Jun 2004 Age: 51 Posts: 1,258 Member: 69514 Status: Offline Thanks Meter: 66	hi,dejan when we had any problem we think only you can solve it. thanks for your help uptill now.make it continue.gsm team had made enough money uptill now.they did not thoght about you.if you won't crack this rpl s.w some body in futer will crack it & he will take all credit.as far as i think we all love you & i will newer wish others name for this. after all money is not everything in life.