FTD/NetMonitor - Page 19 - GSM-Forum

GsmDemon · 05-25-2006, 12:59

Quote:

Originally Posted by mjf

...german !

Do you have this file ?

mjf

Quote:

Originally Posted by rv9cdw

Hi. I would like to have russian language .
Best regards.

Here http://rapidshare.de/files/21340003/npl110_7.00e.html you have:
English(+T9),German(+T9), Lithuanian, Latvian, Russian(+T9), Estonian, Ukrainian.
Work?
Best regards,
GsmDemon

rv9cdw · 05-25-2006, 14:02

Quote:

Originally Posted by GsmDemon

Here http://rapidshare.de/files/21340003/npl110_7.00e.html you have:
English(+T9),German(+T9), Lithuanian, Latvian, Russian(+T9), Estonian, Ukrainian.
Work?
Best regards,
GsmDemon

Thank you wery mach for link.
I have loaded this file.
I will write to forum leter,as i will be loading this firmware.
Best regards.

KPbICMAH · 05-25-2006, 14:47

Quote:

Originally Posted by rv9cdw

Hi.I have 6310i. Where can i find PPM for ftd_npl1_7.000.
Help me please.

Try this link please: http://rapidshare.de/files/21340003/npl110_7.00e.html

I tried uploading it, but Rapidshare says it has already been uploaded by someone else, so I'm not responsible if something goes wrong.

Or give me your e-mail, I will send it directly.

PPM "E" for NPL-1, v7.00. Contains both Russian and German.

OOPS, I'm too slow today.

GsmDemon · 05-25-2006, 17:00

Quote:

Originally Posted by KPbICMAH

Try this link please: http://rapidshare.de/files/21340003/npl110_7.00e.html

I tried uploading it, but Rapidshare says it has already been uploaded by someone else, so I'm not responsible if something goes wrong.

Or give me your e-mail, I will send it directly.

PPM "E" for NPL-1, v7.00. Contains both Russian and German.

OOPS, I'm too slow today.

I uploaded this. Read three posts up

rv9cdw · 05-25-2006, 17:18

Hi all. Have anyone firmware for nokia 6021 whith FTD ?
Regards.

KPbICMAH · 05-26-2006, 05:15

rv9cdw
Try the following: if you don't have the latest version 4.50 of flash files for RM-94 (6021), download them here, open the MCU with HEX editor, go to address BD, you will find the sequence 2C 56. Replace it with 3D 88. Flash the phone with this MCU.

WARNING: The above change is only a wild guess. I haven't had a chance to try this. If you flash your phone with this patched MCU, you might get FTD, get nothing, or get a dead phone. In the latter case, flash the phone with the normal MCU. It will revive the phone.

Let me know how it went.

mjf · 05-26-2006, 21:05

....i´m searching ever for the FTD mcu for 8910 - NHM-4.

Can anybody help me ???

many thx
mjf

sallupat · 05-27-2006, 12:51

is any body going to tell me that what is "FTD & NETMONITOR"???????
i asked this second time but i think no one is interested to give me the knowledge

KPbICMAH · 05-27-2006, 13:28

sallupat

If you don't know what it is, then you just don't need this.
If you are too lazy to look it up yourself (or your time is too precious to do some searching), then I am too lazy to answer you and I have better things to do with my time than to explain this to you.

Regards!

rv9cdw · 05-27-2006, 15:20

Quote:

Originally Posted by GsmDemon

Here http://rapidshare.de/files/21340003/npl110_7.00e.html you have:
English(+T9),German(+T9), Lithuanian, Latvian, Russian(+T9), Estonian, Ukrainian.
Work?
Best regards,
GsmDemon

I downloaded 6310i v7.00.
Working OK!
Thank you very mach!!!!!!!

GsmDemon · 05-27-2006, 17:29

Quote:

Originally Posted by sallupat

is any body going to tell me that what is "FTD & NETMONITOR"???????
i asked this second time but i think no one is interested to give me the knowledge

NetMonitor is special mode in telephone. With this you can check the Rx and Tx values on phone display and other informations.
Regards,
GsmDemon

boondoggler · 05-28-2006, 11:20

Is the 6230 (RH-12) patched file both MCU/PPM in one???
or do I need corresponding PPM file? if so how/where?

GsmDemon · 05-28-2006, 13:22

Hi!
You should have MCU and PPM(language)files. What language do you want?
Regards,
GsmDemon

boondoggler · 05-28-2006, 18:14

Quote:

Originally Posted by GsmDemon

Hi!
You should have MCU and PPM(language)files. What language do you want?
Regards,
GsmDemon

GsmDemon,

I want to put netmon enabled firmware on my 6230. I have downloaded the ftd_rh12__5.500 file from a previous post,

where would the MCU/PPM files be, is the ftd_rh12__5.500 file combined PPM/MCU??

Forgive me, this is my first flash....

I require english

my mail: [email protected]

thanks

Mr_Frag · 05-28-2006, 20:34

Quote:

Originally Posted by boondoggler

Is the 6230 (RH-12) patched file both MCU/PPM in one???
or do I need corresponding PPM file? if so how/where?

If you want to flash your phone with FTD, you must flash ONLY patched MCU file with any PPM and CNT files... How to patch MCU I wrote early...

05-27-2006, 13:28	#279 (permalink)
KPbICMAH Freak Poster Join Date: Oct 2003 Age: 49 Posts: 311 Member: 41760 Status: Offline Thanks Meter: 16	sallupat If you don't know what it is, then you just don't need this. If you are too lazy to look it up yourself (or your time is too precious to do some searching), then I am too lazy to answer you and I have better things to do with my time than to explain this to you. Regards!

05-25-2006, 17:18	#275 (permalink)
rv9cdw Junior Member Join Date: Mar 2006 Location: Russia.Ekaterinburg Age: 56 Posts: 10 Member: 243224 Status: Offline Thanks Meter: 0	Hi all. Have anyone firmware for nokia 6021 whith FTD ? Regards.

05-26-2006, 05:15	#276 (permalink)
KPbICMAH Freak Poster Join Date: Oct 2003 Age: 49 Posts: 311 Member: 41760 Status: Offline Thanks Meter: 16	rv9cdw Try the following: if you don't have the latest version 4.50 of flash files for RM-94 (6021), download them here, open the MCU with HEX editor, go to address BD, you will find the sequence 2C 56. Replace it with 3D 88. Flash the phone with this MCU. WARNING: The above change is only a wild guess. I haven't had a chance to try this. If you flash your phone with this patched MCU, you might get FTD, get nothing, or get a dead phone. In the latter case, flash the phone with the normal MCU. It will revive the phone. Let me know how it went.

05-26-2006, 21:05	#277 (permalink)
mjf Junior Member Join Date: Feb 2005 Age: 43 Posts: 12 Member: 114057 Status: Offline Thanks Meter: 0	....i´m searching ever for the FTD mcu for 8910 - NHM-4. Can anybody help me ??? many thx mjf

05-27-2006, 12:51	#278 (permalink)
sallupat No Life Poster Join Date: Apr 2005 Age: 46 Posts: 911 Member: 138982 Status: Offline Thanks Meter: 138	is any body going to tell me that what is "FTD & NETMONITOR"??????? i asked this second time but i think no one is interested to give me the knowledge

05-28-2006, 11:20	#282 (permalink)
boondoggler Junior Member Join Date: May 2006 Posts: 13 Member: 284133 Status: Offline Thanks Meter: 0	Is the 6230 (RH-12) patched file both MCU/PPM in one??? or do I need corresponding PPM file? if so how/where?

05-28-2006, 13:22	#283 (permalink)
GsmDemon Major Poster Join Date: May 2006 Location: Nearby my COMPUTER Age: 41 Posts: 45 Member: 274923 Status: Offline Thanks Meter: 1	Hi! You should have MCU and PPM(language)files. What language do you want? Regards, GsmDemon