FTD/NetMonitor - Page 9 - GSM-Forum

Cosconor · 01-04-2006, 20:07

Hello everybody !

I've got a Nokia 6310, and I don't really understand if I'll need to find also the PPM (language pack) file, in the same version as the MCU patched file. Can it work without this file, only with the MCU file ?

Thanks !

ldril · 01-05-2006, 18:23

@Cosconor
You need matching MCU and PPM files. If you already have on the phone the same version with that of the patched file then it's ok and you need to flash only the MCU. If the version is different you need to find a matching PPM for the patch MCU.
BR

Cosconor · 01-05-2006, 23:52

Yess ! Thanks very much !

My 6310 is now with version 5.10, and the patched MCU file you give there is also in version 5.10, so it should be OK !

I brought today my 6310 to a service point, with a CD where I've put the flash, and they should install it this week-end, so I'll take my 6310 back monday. I'll tell you then if it's OK.

KPbICMAH · 01-06-2006, 04:39

Cosconor
How big is the MCU you downloaded? If it is around 64k and your phone is v5.10, then you don't need anything other than the MCU. If, however, the MCU file is in Megs, then you'll need matching PPM anyway, because normally MCU flashing erases the PPM area.

Cosconor · 01-06-2006, 11:33

KPbICMAH
Oh no !

The patched MCU you give there has 5,7 Mb ! So ? I'll need to have the PPM file too ?
But where can I find it ? I've searched it for hours on the forum and on the Net, and I didn't found the correct version (5.10, like the patched MCU ; 5.10 is the last firmware version for Nokia 6310).

Maybe someone have this PPM file, and can send it to me by mail

: [email protected]

johan · 01-09-2006, 21:50

how to activate net monitor on 6230i ver 3.62 old hw?

pphone · 01-10-2006, 10:01

I tried write a firmware for n6230i ver3.50 with tonado soft, it not work but already done for write it.why ? pls share if anybody know this problem.
We are used a frimware in this post.

pphone · 01-10-2006, 10:06

i tried flash the firmware FTD 8310v6.20 with tonado soft. it work 100%.

thanks,

joe10 · 01-10-2006, 17:48

Hi everybody!
Do You listen something about FTD in nokia 6021?

b0ba · 01-11-2006, 21:57

@joe10:

What's the problem?

joe10 · 01-12-2006, 11:08

Quote:

Originally Posted by b0ba

@joe10:

What's the problem?

I need this FTD for 6021 RM-94 4.10

petermov · 01-13-2006, 11:30

great work!! , needed patch for 8910, is not aviable this flash????'

Thanx.

evan_silbert · 01-15-2006, 00:52

Anyone had any luck with 8800 RM13?

iceeman · 01-19-2006, 00:14

Hi all, i have a 6230i flashed with netmonitor enabled and it works perfectly, thanks to all involved.
I have one small annoying problem that is when you make a call the graphics box of the call info hide the net monitor screen and i can not see the data. does anybody know how to disable this. In older models this dissapears after a few seconds.
Thanks in advance.

tsengxx · 01-19-2006, 15:21

can i upload the patched flash file to N 1100,What hardware and software?

01-04-2006, 20:07	#121 (permalink)
Cosconor Junior Member Join Date: Jan 2006 Location: France/Romania Posts: 14 Member: 216817 Status: Offline Thanks Meter: 1	Nokia 6310 PPM Hello everybody ! I've got a Nokia 6310, and I don't really understand if I'll need to find also the PPM (language pack) file, in the same version as the MCU patched file. Can it work without this file, only with the MCU file ? Thanks !

01-06-2006, 11:33	#125 (permalink)
Cosconor Junior Member Join Date: Jan 2006 Location: France/Romania Posts: 14 Member: 216817 Status: Offline Thanks Meter: 1	KPbICMAH Oh no ! The patched MCU you give there has 5,7 Mb ! So ? I'll need to have the PPM file too ? But where can I find it ? I've searched it for hours on the forum and on the Net, and I didn't found the correct version (5.10, like the patched MCU ; 5.10 is the last firmware version for Nokia 6310). Maybe someone have this PPM file, and can send it to me by mail : [email protected] Last edited by Cosconor; 01-06-2006 at 15:35.

01-09-2006, 21:50	#126 (permalink)
johan Crazy Poster Join Date: Dec 1999 Posts: 50 Member: 750 Status: Offline Thanks Meter: 0	net monitor for 6230i ver 3.62 old hw how to activate net monitor on 6230i ver 3.62 old hw?

01-13-2006, 11:30	#132 (permalink)
petermov Freak Poster Join Date: Aug 2004 Location: spain Age: 46 Posts: 472 Member: 79485 Status: Offline Thanks Meter: 47	hi great work!! , needed patch for 8910, is not aviable this flash????' Thanx.

01-05-2006, 18:23	#122 (permalink)
ldril Insane Poster Join Date: Jan 2002 Location: Romania Posts: 61 Member: 8505 Status: Offline Thanks Meter: 0	@Cosconor You need matching MCU and PPM files. If you already have on the phone the same version with that of the patched file then it's ok and you need to flash only the MCU. If the version is different you need to find a matching PPM for the patch MCU. BR

01-05-2006, 23:52	#123 (permalink)
Cosconor Junior Member Join Date: Jan 2006 Location: France/Romania Posts: 14 Member: 216817 Status: Offline Thanks Meter: 1	Yess ! Thanks very much ! My 6310 is now with version 5.10, and the patched MCU file you give there is also in version 5.10, so it should be OK ! I brought today my 6310 to a service point, with a CD where I've put the flash, and they should install it this week-end, so I'll take my 6310 back monday. I'll tell you then if it's OK.

01-06-2006, 04:39	#124 (permalink)
KPbICMAH Freak Poster Join Date: Oct 2003 Age: 49 Posts: 311 Member: 41760 Status: Offline Thanks Meter: 16	Cosconor How big is the MCU you downloaded? If it is around 64k and your phone is v5.10, then you don't need anything other than the MCU. If, however, the MCU file is in Megs, then you'll need matching PPM anyway, because normally MCU flashing erases the PPM area.

01-10-2006, 10:01	#127 (permalink)
pphone Major Poster Join Date: Oct 2005 Posts: 47 Member: 194298 Status: Offline Thanks Meter: 3	I tried write a firmware for n6230i ver3.50 with tonado soft, it not work but already done for write it.why ? pls share if anybody know this problem. We are used a frimware in this post.

01-10-2006, 10:06	#128 (permalink)
pphone Major Poster Join Date: Oct 2005 Posts: 47 Member: 194298 Status: Offline Thanks Meter: 3	i tried flash the firmware FTD 8310v6.20 with tonado soft. it work 100%. thanks,

01-10-2006, 17:48	#129 (permalink)
joe10 Junior Member Join Date: Jan 2006 Posts: 5 Member: 218237 Status: Offline Thanks Meter: 0	Hi everybody! Do You listen something about FTD in nokia 6021?

01-11-2006, 21:57	#130 (permalink)
b0ba No Life Poster Join Date: Oct 2001 Location: No route to host. Age: 43 Posts: 895 Member: 6772 Status: Offline Thanks Meter: 17	@joe10: What's the problem?

01-15-2006, 00:52	#133 (permalink)
evan_silbert No Life Poster Join Date: Feb 2003 Location: Boston Posts: 5,027 Member: 21920 Status: Offline Thanks Meter: 10	Anyone had any luck with 8800 RM13?

01-19-2006, 00:14	#134 (permalink)
iceeman Junior Member Join Date: Jan 2006 Posts: 1 Member: 222594 Status: Offline Thanks Meter: 0	Hi all, i have a 6230i flashed with netmonitor enabled and it works perfectly, thanks to all involved. I have one small annoying problem that is when you make a call the graphics box of the call info hide the net monitor screen and i can not see the data. does anybody know how to disable this. In older models this dissapears after a few seconds. Thanks in advance.

01-19-2006, 15:21	#135 (permalink)
tsengxx Junior Member Join Date: Jan 2006 Posts: 6 Member: 222827 Status: Offline Thanks Meter: 0	can i upload the patched flash file to N 1100,What hardware and software?