help needed from clever people - GSM-Forum

flexasist · 01-19-2003, 20:24

i have a nokia 8310 works fine

i have replaced uem and now got imei ????????????????, and phone restricted to all nets with sp data locked to: DD4899529A42DAB2
uem version = 38
upp version = 288

the phone reads fine in winpheniox.

i try to make log for rebuild imei data as i can get these calculated but i keep getting error when it trys to read uem. it says cannot read data from uem.

i get this error with all phones including working phones and not just phone with changed uem.

i want to now how can i make this rebuild file without getting this error.

i am using a 6 digit pkd.

M@RTY · 01-19-2003, 20:39

Hi

I think you need the JBV-1 supplied with 12v to read/write log file.

B.R

M@RTY

flexasist · 01-26-2003, 19:47

you do not need jbv-1 to read or write log. if this was the case soft will give error that box is missing, just as u try to flash with no fps8.

willy · 01-26-2003, 20:43

flexasist

try phoenix 3.72 , and mark IMEI + simlock + UEM changed in tools -> IMEI rebuild windows box with HW FPS8 + MBUS !

write log,,, you need JBV-1 for IMEI rebuild if you use phoenix !

Willy

Quote:

Originally posted by flexasist
you do not need jbv-1 to read or write log. if this was the case soft will give error that box is missing, just as u try to flash with no fps8.

slim_shadyce · 08-01-2003, 02:08

where can i get chip replaced on my 8910i baught a load on ebay all blocked gutted

01-19-2003, 20:24	#1 (permalink)
flexasist Freak Poster Join Date: Dec 2001 Posts: 303 Member: 7809 Status: Offline Thanks Meter: 26	help needed from clever people i have a nokia 8310 works fine i have replaced uem and now got imei ????????????????, and phone restricted to all nets with sp data locked to: DD4899529A42DAB2 uem version = 38 upp version = 288 the phone reads fine in winpheniox. i try to make log for rebuild imei data as i can get these calculated but i keep getting error when it trys to read uem. it says cannot read data from uem. i get this error with all phones including working phones and not just phone with changed uem. i want to now how can i make this rebuild file without getting this error. i am using a 6 digit pkd.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help needed from Martech users	mr_x4you	Siemens-Benq RingTones and WallPapers	13	08-10-2009 15:41
OK. Just a bit of help needed from someone in the know...	Mr.Crabs!	UFS2 + UFS3-Tornadoflasher	12	03-19-2007 18:50
Little Help Need From Furious	dipakgt9	FuriouS II	8	02-11-2006 15:26
GX10i - help needed from Singapore	wmyong73	Sharp	0	10-10-2003 16:45
home/office/mobile customize & help needed from Chaos	spinkilla	x4x, x5x Flashpatching	24	09-12-2003 15:09

01-19-2003, 20:39	#2 (permalink)
M@RTY Freak Poster Join Date: Feb 2002 Posts: 193 Member: 9254 Status: Offline Thanks Meter: 4	Hi I think you need the JBV-1 supplied with 12v to read/write log file. B.R M@RTY

01-26-2003, 19:47	#3 (permalink)
flexasist Freak Poster Join Date: Dec 2001 Posts: 303 Member: 7809 Status: Offline Thanks Meter: 26	you do not need jbv-1 to read or write log. if this was the case soft will give error that box is missing, just as u try to flash with no fps8.

08-01-2003, 02:08	#5 (permalink)
slim_shadyce Junior Member Join Date: Jul 2003 Location: cardiff wales uk Posts: 6 Member: 35672 Status: Offline Thanks Meter: 0	where can i get chip replaced on my 8910i baught a load on ebay all blocked gutted