LP 2002 is it good??? - GSM-Forum

xelo · 08-21-2003, 17:37

Hi,

I need help, What is the diffenret between griffin and LP 2002?

And how is LP 2002? What good and what bad on LP 2002?

do anyone recomand the LP 2002?

Thanks..

regards

xelo

eko · 08-21-2003, 18:20

Hi m8,

Lp2002 is a good tool ,but with my klittle experience i have realised that one needs to get as many tools as possible as long as you can afford them
original Lp2002 about $200 (support not too fantastic)
original griffin about $350.

The choice is yours.
Br
eko.

xelo · 08-21-2003, 23:50

thanks..

I dont know which one i should choose... griffin have good support, but it is very expensive..

give me a hint

))

inox · 08-22-2003, 20:11

Neelix III flash DCT3 AND DCT4

eko · 08-22-2003, 21:14

@xelo,

Really i think it depends on the amount of money you intend to spend.

But another way is to consider the problems that are most common to you in other words what would like the tool you want to do for you.
or otherwise your general anticipation.
Then this way someone might just be able to advice you with reasons.

Br
eko.

jan · 08-23-2003, 02:33

I have LP2002, very nice tool, ideal for people, they don't have many phones to flash.

It looks like the old Pro Flasher, but it use original Nokia Files

Supported phone models:
8310 / 6510 / 6310 / 6310i /3510 / 3510i / 8910 / 8910i
5100 / 6100 / 7650 / 9210 / 7210 / 7250 / 6610 / 3650

supports newest flash loaders
(Works with original Nokia loader pack, no need to swap manually)

working with orginal Nokia Flash Files
(No need to use "patched" Flash Files)

automatic file autoselect

automatic switch ON / OFF the phone during flashing procedure

BEEP after flashing

repair bluetooth problem

"Contact Service" repairing and SW faults repairing

Security code reset to 12345 / force security code reset

TEST and RESET commands, Set Factory settings

work under all OS 95/98/2000/NT/Me/XP

Simple, Easy to use user Interface

Ideal cheap flasher that work

Price is now 99,- Euro, contact me, if Interestet.

TheEckoMan · 08-23-2003, 05:45

Its ideal for older dct4 phones.
On newer phones you must make manual select....
(Because LP2002 have mbus only)

So newer DCT4 wont be supported
WBR

xelo · 08-23-2003, 12:23

what does it mean " make maual select"? Is it posiple to flash all Nokia DCT4 phones? and how is the support from LP 2002 team?

eko · 08-23-2003, 20:18

@xelo,
By manual select, this means that the tool will not automatically read out the phone details and as such you have to manual select the phone to flash it as if it were dead.
@jan
Did you mention 3650 and does it come with the 3650 cable mmmmm??
Br
eko.

jan · 08-24-2003, 03:18

Yes is right, on newer modells you must select files manually, like DCT3 Flasher, but is working without any problems.

This cables are in the set what I sell:

5100, 6100, 3650, 8310, 3510, 7210, 8910, 7650, 6310,

Jan

Pichit · 08-24-2003, 03:53

@ jan

what version you use ? i use LP2002 v.105_2 but this version
can not flash 5100, 6100, 3650, 7250, 6800, 3300
it can flash only 8310, 6510, 8910, 7210, 6610, 7650, 3510, 6310

if you have newer version , please send to my email
Thanks in advance.

eko · 08-24-2003, 19:18

@Jan

Do you have the 3650 cable and the flash files and also for 9210.

i might just be interested.

Br
eko

jan · 08-26-2003, 02:32

Hi

So now I have the exact description for LP2002

On older Modells, its work without any problems

On newer Modells, you must select Files manually, you can not flash content package, so its better you only update ppm only, but you can update MCU also.

I get confirmation, that 3650 works, but I self don't try, I have no 3650.

Latest Version is v.105_2

Jan

PS, I have only complete sets, so I don't have single cables.

On ouer new sets, pinout ist the same as Neelix or matrix.

The relaese from GSMhacking use different Pinout

moguth · 08-26-2003, 12:56

²eko

the 9210 cable is not the problem, use the 9110/9210 connector from a datacable to build your own cable
the lp2002 works good, don´t forget the price difference to griffin...

(take the difference and buy yourself a pkd1

)

²jan
nice price
if you can make the price even better - contact me:
[email protected]

eko · 08-26-2003, 19:23

@moguth,

Do you have the files for the 9210 and 3650 for lp2002 . I can sort out the cable problem easily.

Br
eko.

08-21-2003, 17:37	#1 (permalink)
xelo Insane Poster Join Date: Feb 2003 Location: Denmark Age: 47 Posts: 66 Member: 20718 Status: Offline Thanks Meter: 0	LP 2002 is it good??? Hi, I need help, What is the diffenret between griffin and LP 2002? And how is LP 2002? What good and what bad on LP 2002? do anyone recomand the LP 2002? Thanks.. regards xelo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
==-- is it GOOD QUALITY --==	Faisal_Computer	Nokia Multimedia	3	06-30-2006 07:18
is it good to buy now a PBB box ? i heard Jaf is better...	cellularman	Phoenix Black Box	5	08-19-2005 21:43
INFARED IC HEATER OVEN, is it good?	MC Harami	Hardware Equipments for GSM	39	09-26-2004 18:30
Is it good?	asdcde	Sim Cloning and Scaning	3	08-09-2003 09:25
WHAT IS IT GOOD FOR?	MR NO NAME	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-18-2002 02:22

08-21-2003, 18:20	#2 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	Hi m8, Lp2002 is a good tool ,but with my klittle experience i have realised that one needs to get as many tools as possible as long as you can afford them original Lp2002 about $200 (support not too fantastic) original griffin about $350. The choice is yours. Br eko.

08-21-2003, 23:50	#3 (permalink)
xelo Insane Poster Join Date: Feb 2003 Location: Denmark Age: 47 Posts: 66 Member: 20718 Status: Offline Thanks Meter: 0	thanks.. I dont know which one i should choose... griffin have good support, but it is very expensive.. give me a hint ))

08-22-2003, 20:11	#4 (permalink)
inox Freak Poster Join Date: Aug 2002 Posts: 224 Member: 14637 Status: Offline Thanks Meter: 1	Neelix III flash DCT3 AND DCT4

08-22-2003, 21:14	#5 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	@xelo, Really i think it depends on the amount of money you intend to spend. But another way is to consider the problems that are most common to you in other words what would like the tool you want to do for you. or otherwise your general anticipation. Then this way someone might just be able to advice you with reasons. Br eko.

08-23-2003, 02:33	#6 (permalink)
jan No Life Poster Join Date: Jun 1999 Location: Germany Posts: 667 Member: 233 Status: Offline Thanks Meter: 36	I have LP2002, very nice tool, ideal for people, they don't have many phones to flash. It looks like the old Pro Flasher, but it use original Nokia Files Supported phone models: 8310 / 6510 / 6310 / 6310i /3510 / 3510i / 8910 / 8910i 5100 / 6100 / 7650 / 9210 / 7210 / 7250 / 6610 / 3650 supports newest flash loaders (Works with original Nokia loader pack, no need to swap manually) working with orginal Nokia Flash Files (No need to use "patched" Flash Files) automatic file autoselect automatic switch ON / OFF the phone during flashing procedure BEEP after flashing repair bluetooth problem "Contact Service" repairing and SW faults repairing Security code reset to 12345 / force security code reset TEST and RESET commands, Set Factory settings work under all OS 95/98/2000/NT/Me/XP Simple, Easy to use user Interface Ideal cheap flasher that work Price is now 99,- Euro, contact me, if Interestet.

08-23-2003, 05:45	#7 (permalink)
TheEckoMan No Life Poster Join Date: Mar 2001 Location: Australia, Melbourne Age: 37 Posts: 548 Member: 3902 Status: Offline Thanks Meter: 19	Its ideal for older dct4 phones. On newer phones you must make manual select.... (Because LP2002 have mbus only) So newer DCT4 wont be supported WBR

08-23-2003, 12:23	#8 (permalink)
xelo Insane Poster Join Date: Feb 2003 Location: Denmark Age: 47 Posts: 66 Member: 20718 Status: Offline Thanks Meter: 0	what does it mean " make maual select"? Is it posiple to flash all Nokia DCT4 phones? and how is the support from LP 2002 team?

08-23-2003, 20:18	#9 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	@xelo, By manual select, this means that the tool will not automatically read out the phone details and as such you have to manual select the phone to flash it as if it were dead. @jan Did you mention 3650 and does it come with the 3650 cable mmmmm?? Br eko.

08-24-2003, 03:18	#10 (permalink)
jan No Life Poster Join Date: Jun 1999 Location: Germany Posts: 667 Member: 233 Status: Offline Thanks Meter: 36	Yes is right, on newer modells you must select files manually, like DCT3 Flasher, but is working without any problems. This cables are in the set what I sell: 5100, 6100, 3650, 8310, 3510, 7210, 8910, 7650, 6310, Jan

08-24-2003, 03:53	#11 (permalink)
Pichit Junior Member Join Date: Nov 2001 Location: MBK Posts: 25 Member: 7125 Status: Offline Thanks Meter: 0	@ jan what version you use ? i use LP2002 v.105_2 but this version can not flash 5100, 6100, 3650, 7250, 6800, 3300 it can flash only 8310, 6510, 8910, 7210, 6610, 7650, 3510, 6310 if you have newer version , please send to my email Thanks in advance.

08-24-2003, 19:18	#12 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	@Jan Do you have the 3650 cable and the flash files and also for 9210. i might just be interested. Br eko

08-26-2003, 02:32	#13 (permalink)
jan No Life Poster Join Date: Jun 1999 Location: Germany Posts: 667 Member: 233 Status: Offline Thanks Meter: 36	Hi So now I have the exact description for LP2002 On older Modells, its work without any problems On newer Modells, you must select Files manually, you can not flash content package, so its better you only update ppm only, but you can update MCU also. I get confirmation, that 3650 works, but I self don't try, I have no 3650. Latest Version is v.105_2 Jan PS, I have only complete sets, so I don't have single cables. On ouer new sets, pinout ist the same as Neelix or matrix. The relaese from GSMhacking use different Pinout

08-26-2003, 12:56	#14 (permalink)
moguth Freak Poster Join Date: Dec 2001 Location: Banana Republic of Germany Age: 55 Posts: 273 Member: 7769 Status: Offline Thanks Meter: 0	²eko the 9210 cable is not the problem, use the 9110/9210 connector from a datacable to build your own cable the lp2002 works good, don´t forget the price difference to griffin... (take the difference and buy yourself a pkd1 ) ²jan nice price if you can make the price even better - contact me: [email protected]

08-26-2003, 19:23	#15 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	@moguth, Do you have the files for the 9210 and 3650 for lp2002 . I can sort out the cable problem easily. Br eko.