unlock RH-87 2610b v5.65 - GSM-Forum

simcell · 08-31-2007, 00:22

I tried unlocking 2 of theese phones found the correct rh-86_87 mcu file nut fails at the end and my phones both wont turn on now I have one more good phone any one know how to unlock software version 5.65 from T-Mobile USA?

gepenx_fausta · 08-31-2007, 17:48

You need to convert it to Nokia 2610, downgrade to version 3.08 , first full erase and full flash, write good PM, and then replace the filter,

simcell · 09-02-2007, 02:43

Thank you for your help i have a few questions.
1. I tried downloading from raskal servers but the lowest version is 3.77 and higher then that is 4.5?
2. How do I full erase and do i erase the pm also?
3. What is a "GOOD" pm and how do i get it?
4. What is a filter and how is it replaced?
Thanks to all that help me I am not new but there is sooooooo much to learn!

Jazz · 09-05-2007, 02:23

Also waiting to hear about this.....

nost · 09-06-2007, 17:19

there is any posibility to unlock whit ufs??

mrfixit · 09-11-2007, 17:45

Quote:

Originally Posted by gepenx_fausta

You need to convert it to Nokia 2610, downgrade to version 3.08 , first full erase and full flash, write good PM, and then replace the filter,

we want this to work with 850/1900 not 900/1800, the question was not how to convert to european asian band but to unlock this new 2610b tmobile usa version, I also got one and it wont turn on now, nokia changed something in there dct4+ versions soon other models will follow, need solution to unlock these new models.
mtbox 1.37 gives with version rh87 5.65:

Failed to Read
Failed to locate PATCH target!

but v3.75 it finds target and unlock ok but wont turn on, its not turning on after flashing back to 5.65 need good 2610b v5.65 pm and write back, please upload, tnx

merdaparaisto · 09-11-2007, 22:27

how do i get restiction codes for at7t nokia2610

mrfixit · 09-19-2007, 14:06

read out pm from a good v5.65 and write back in phone but still phone not turn on and contact sevice only.

Muneer Ahmed · 09-26-2007, 14:57

this version cannot be unlocked yet accept codes which are very mch expensive and it is the phone with new security so dont try it by flashing or unlocking otherwise you will loose your phone and it wont work until the solution comes so just wait except trying to unlock.

BR
Muneer Ahmed

venomhotboy · 09-27-2007, 14:01

need help I got one too now saying CONTACT SERVICE. Please help me its for an irate customer.

Venom

mrfixit · 09-27-2007, 15:15

buy new rh87 up to v4.90 from cingular or rogers (about 40 usd), unlock and give to customer, charge him for unlocking, wait for solution until developed and fix contact service then sell it, thats how you can cut your loss.

dirt_017 · 10-28-2007, 14:29

hi can anyone give me 2610 flashfile?

lehai75 · 12-02-2007, 02:49

I have 2610b RH-87 ver 5.65, I flashing Rh-86 ver 4.5. Phone is CS. CAn you help me?

dinh hieu · 12-02-2007, 03:13

Quote:

Originally Posted by lehai75

I have 2610b RH-87 ver 5.65, I flashing Rh-86 ver 4.5. Phone is CS. CAn you help me?

Maybe you change a main 2610 for it ...

dexter_mn · 12-02-2007, 03:25

not possible UNLOCK 2610b 5.65 version
still not support any box and any sw

08-31-2007, 00:22	#1 (permalink)
simcell Junior Member Join Date: Jul 2005 Location: New Jersey USA Age: 40 Posts: 12 Member: 159191 Status: Offline Thanks Meter: 3	unlock RH-87 2610b v5.65 I tried unlocking 2 of theese phones found the correct rh-86_87 mcu file nut fails at the end and my phones both wont turn on now I have one more good phone any one know how to unlock software version 5.65 from T-Mobile USA?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can't unlock 2610b v5.65	E&D	Multi-Box	5	03-19-2008 11:10
problem unlock with 2610b v5.65	Santiago LEE	MT-BOX	9	11-20-2007 01:14

08-31-2007, 17:48	#2 (permalink)
gepenx_fausta Freak Poster Join Date: Aug 2007 Location: Inside GSM Posts: 161 Member: 557999 Status: Offline Thanks Meter: 7	You need to convert it to Nokia 2610, downgrade to version 3.08 , first full erase and full flash, write good PM, and then replace the filter,

09-02-2007, 02:43	#3 (permalink)
simcell Junior Member Join Date: Jul 2005 Location: New Jersey USA Age: 40 Posts: 12 Member: 159191 Status: Offline Thanks Meter: 3	Thank you for your help i have a few questions. 1. I tried downloading from raskal servers but the lowest version is 3.77 and higher then that is 4.5? 2. How do I full erase and do i erase the pm also? 3. What is a "GOOD" pm and how do i get it? 4. What is a filter and how is it replaced? Thanks to all that help me I am not new but there is sooooooo much to learn!

09-05-2007, 02:23	#4 (permalink)
Jazz No Life Poster Join Date: Jan 2006 Location: Canada Posts: 706 Member: 219362 Status: Offline Thanks Meter: 31	Also waiting to hear about this.....

09-06-2007, 17:19	#5 (permalink)
nost Freak Poster Join Date: Nov 2005 Location: Colombia Age: 48 Posts: 392 Member: 197360 Status: Offline Thanks Meter: 25	there is any posibility to unlock whit ufs??

09-11-2007, 22:27	#7 (permalink)
merdaparaisto Junior Member Join Date: Sep 2007 Posts: 1 Member: 586160 Status: Offline Thanks Meter: 0	how do i get restiction codes for at7t nokia2610

09-19-2007, 14:06	#8 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	read out pm from a good v5.65 and write back in phone but still phone not turn on and contact sevice only.

09-26-2007, 14:57	#9 (permalink)
Muneer Ahmed Freak Poster Join Date: Mar 2004 Location: United Arab Emirates Age: 33 Posts: 470 Member: 60500 Status: Offline Thanks Meter: 2	this version cannot be unlocked yet accept codes which are very mch expensive and it is the phone with new security so dont try it by flashing or unlocking otherwise you will loose your phone and it wont work until the solution comes so just wait except trying to unlock. BR Muneer Ahmed

09-27-2007, 14:01	#10 (permalink)
venomhotboy No Life Poster Join Date: Jul 2005 Location: Jamaica Age: 41 Posts: 1,045 Member: 162707 Status: Offline Thanks Meter: 66	need help I got one too now saying CONTACT SERVICE. Please help me its for an irate customer. Venom

09-27-2007, 15:15	#11 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	buy new rh87 up to v4.90 from cingular or rogers (about 40 usd), unlock and give to customer, charge him for unlocking, wait for solution until developed and fix contact service then sell it, thats how you can cut your loss.

10-28-2007, 14:29	#12 (permalink)
dirt_017 Freak Poster Join Date: Oct 2007 Location: PINAS Posts: 201 Member: 614278 Status: Offline Thanks Meter: 22	hi can anyone give me 2610 flashfile?

12-02-2007, 02:49	#13 (permalink)
lehai75 Insane Poster Join Date: Jan 2006 Posts: 77 Member: 216062 Status: Offline Thanks Meter: 11	I have 2610b RH-87 ver 5.65, I flashing Rh-86 ver 4.5. Phone is CS. CAn you help me?

12-02-2007, 03:25	#15 (permalink)
dexter_mn Freak Poster Join Date: Jul 2006 Location: heart of Asia Posts: 499 Member: 311316 Status: Offline Thanks Meter: 41	not possible UNLOCK 2610b 5.65 version still not support any box and any sw