What firmware Version for flash 7210! - GSM-Forum

Maurone · 07-29-2004, 16:29

Hi at all,

i need to know what version to use with griffin for flash my 7210 !! The version of firmware must have MCU and PPM file, and also games or image to use like wallpaper!

thank in advance

Maurone · 07-29-2004, 19:43

I try too more to flash 7210 but griffin says everytime: The phone not connect, power on and press ok! Also manually the flashing begin and at the end failed everytime!

Pls help me

Thanks

NeXuSGTS · 07-29-2004, 20:04

Give more vpp to griffin. give it 10.5 V or 11 V max and it will work. Griffin has the same problem with newer version of 8310i and it works. Try it. You should flash it.

Power up the phone with an accepted sim card inside and press #06# and see version of phone. ( if the phone still powers on of course ).
For fullflashing you must select MCU, PPM, and CP. All the same version.

Good luck!!!
NeXuSGTS

Maurone · 07-30-2004, 00:29

Quote:

Originally Posted by NeXuSGTS

Give more vpp to griffin. give it 10.5 V or 11 V max and it will work. Griffin has the same problem with newer version of 8310i and it works. Try it. You should flash it.

Power up the phone with an accepted sim card inside and press #06# and see version of phone. ( if the phone still powers on of course ).

you say that i must power up the phone after flash?? But the phone don't power on!

mestrini · 07-30-2004, 01:05

He says to power on the phone when NOT connected to griffin box just to check what firmware version it has inside. Just don't use the code he posted because you'll see the IMEI number and not the firmware version

. Type instead *#0000# and no need to have SIM inside (a cool thing about DCT4)

My experience with 7210 and Griffin tells me that other reasons can make phone not connect. It might have the PCB connection dirty. Try to open phone and clean contact pads. The way i managed to make griffin recognize my 7210 was to unscrew 4 out of the 6 screws that tighten the case and flashed with no prob. As soon as i placed the screws back, Griffin stopped recognizing phone again...

strange right?

hope you can do it

cheers

Maurone · 07-30-2004, 09:28

Quote:

Originally Posted by mestrini

He says to power on the phone when NOT connected to griffin box just to check what firmware version it has inside. Just don't use the code he posted because you'll see the IMEI number and not the firmware version

. Type instead *#0000# and no need to have SIM inside (a cool thing about DCT4)

My experience with 7210 and Griffin tells me that other reasons can make phone not connect. It might have the PCB connection dirty. Try to open phone and clean contact pads. The way i managed to make griffin recognize my 7210 was to unscrew 4 out of the 6 screws that tighten the case and flashed with no prob. As soon as i placed the screws back, Griffin stopped recognizing phone again...

strange right?

hope you can do it

cheers

Ok, thanks at all for your experience

, but i don't say to you that the phone don't power on also when is not connected to griffin box! Infact i want to know what mean "give more vpp to griffin", because griffin says everytime: Connected the phone at the box, power on and press ok!

Maybe depend from contact pads or any bad hardware!?!?

pls help !

Bye

mestrini · 07-30-2004, 10:53

give more vpp means to increase the voltage supply to the box

most power suppliers have a way to increase/decrease the voltage

cheers

Maurone · 07-31-2004, 13:04

Quote:

Originally Posted by mestrini

give more vpp means to increase the voltage supply to the box

most power suppliers have a way to increase/decrease the voltage

cheers

Ok, i don't know if the box that i used have a way to increase/decrease the voltage, but i will try!

Thanks

Drug_Store · 07-31-2004, 14:12

Its not on box, it´s on power font where u power your griffin.

Maurone · 08-01-2004, 20:00

Quote:

Originally Posted by Drug_Store

Its not on box, it´s on power font where u power your griffin.

Sorry Drug, but i don't have see nothing on power font!

Maybe there isn't !

mestrini · 08-01-2004, 22:41

Quote:

Originally Posted by Maurone

Sorry Drug, but i don't have see nothing on power font!

Maybe there isn't !

Do you know what a power supplier is?

It's the device that transforms the 220V from the electricity company to the voltage one needs to operate the desired devices. If it's branded or came with a particular appliance then, most probably, you won't be able to change the voltage but... those bought in a electrical stuff shop have a way to increase/decrease the voltage

cheers

07-29-2004, 16:29	#1 (permalink)
Maurone No Life Poster Join Date: Jul 2004 Age: 46 Posts: 819 Member: 74084 Status: Offline Thanks Meter: 8	What firmware Version for flash 7210! Hi at all, i need to know what version to use with griffin for flash my 7210 !! The version of firmware must have MCU and PPM file, and also games or image to use like wallpaper! thank in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What firmware version of G600 has swedish language? Can someone check their phone?	James_S	QUALCOMM Models (3G)	2	03-11-2009 13:48
What is the latest firmware version for 6230i?	Steel-Blade	Nokia Digital Core Technology 4 ( DCT-4 )	22	09-29-2008 14:45
What is the latest firmware version for the ngage?	sharkie2006	Nokia Hardware & Hardware Repair	3	12-12-2006 04:43
Whats the latest firmware version for the W550i?	The Repair Shop	SonyEricsson (USB-Smart)	0	03-09-2006 12:09
need the new version for 6100 7210 ...	boiljames	Nokia Multimedia	5	09-29-2003 17:31

07-29-2004, 19:43	#2 (permalink)
Maurone No Life Poster Join Date: Jul 2004 Age: 46 Posts: 819 Member: 74084 Status: Offline Thanks Meter: 8	I try too more to flash 7210 but griffin says everytime: The phone not connect, power on and press ok! Also manually the flashing begin and at the end failed everytime! Pls help me Thanks

07-29-2004, 20:04	#3 (permalink)
NeXuSGTS Freak Poster Join Date: Nov 2003 Location: The upper limit Age: 40 Posts: 352 Member: 44552 Status: Offline Thanks Meter: 3	Give more vpp to griffin. give it 10.5 V or 11 V max and it will work. Griffin has the same problem with newer version of 8310i and it works. Try it. You should flash it. Power up the phone with an accepted sim card inside and press #06# and see version of phone. ( if the phone still powers on of course ). For fullflashing you must select MCU, PPM, and CP. All the same version. Good luck!!! NeXuSGTS

07-30-2004, 01:05	#5 (permalink)
mestrini Insane Poster Join Date: Jun 2003 Location: somewhere inside my phone Age: 45 Posts: 76 Member: 32545 Status: Offline Thanks Meter: 2	He says to power on the phone when NOT connected to griffin box just to check what firmware version it has inside. Just don't use the code he posted because you'll see the IMEI number and not the firmware version . Type instead *#0000# and no need to have SIM inside (a cool thing about DCT4) My experience with 7210 and Griffin tells me that other reasons can make phone not connect. It might have the PCB connection dirty. Try to open phone and clean contact pads. The way i managed to make griffin recognize my 7210 was to unscrew 4 out of the 6 screws that tighten the case and flashed with no prob. As soon as i placed the screws back, Griffin stopped recognizing phone again... strange right? hope you can do it cheers

07-30-2004, 10:53	#7 (permalink)
mestrini Insane Poster Join Date: Jun 2003 Location: somewhere inside my phone Age: 45 Posts: 76 Member: 32545 Status: Offline Thanks Meter: 2	give more vpp means to increase the voltage supply to the box most power suppliers have a way to increase/decrease the voltage cheers

07-31-2004, 14:12	#9 (permalink)
Drug_Store No Life Poster Join Date: Sep 2002 Location: Portugal Posts: 8,456 Member: 15312 Status: Offline Sonork: 100.1576041 Thanks Meter: 1,097	Its not on box, it´s on power font where u power your griffin.