Why,why,why,why!!! - GSM-Forum

erogsm · 06-17-2003, 00:07

Dear friends,
please could someone tell me what is wrong.
I used normal F/Mbus cable, and with Rolis 1.8 I can read phone info (i.e.3310), and with the same cable can't read phone info of DTC4(3510) with bWinlock 1.0.6 from B-phreaks.
Always get "unable to read phone info".
The same message get also if I don't connect cable to 3510.
I tried connect external 5V to max232 but always a same.
I used correct F/Mbus cable (PIN10 of chip connect via diode to RX and via resistor 1KOhm to Tx, Pin 9 of chip direct connect to RX).
But don't think that is cable errors, because without cable when I started program bWinlock 1.0.6 get the same message above.
I used Win98.
Please I really ask for help.
I searched on forum and don't found answer.
Please still one more help me
Regards to all

Drug_Store · 06-17-2003, 00:31

Quote:

Originally posted by erogsm
Dear friends,
please could someone tell me what is wrong.
I used normal F/Mbus cable, and with Rolis 1.8 I can read phone info (i.e.3310), and with the same cable can't read phone info of DTC4(3510) with bWinlock 1.0.6 from B-phreaks.
Always get "unable to read phone info".
The same message get also if I don't connect cable to 3510.
I tried connect external 5V to max232 but always a same.
I used correct F/Mbus cable (PIN10 of chip connect via diode to RX and via resistor 1KOhm to Tx, Pin 9 of chip direct connect to RX).
But don't think that is cable errors, because without cable when I started program bWinlock 1.0.6 get the same message above.
I used Win98.
Please I really ask for help.
I searched on forum and don't found answer.
Please still one more help me
Regards to all

I guess cables are different for 33 and 35 models... 33 cables works on 34, but on 35 not sure if works.

NSerN · 06-17-2003, 08:25

How you can use for 3510 same cable as for 3310!!!???
not only pinout diff but connector diff. too???

erogsm · 06-17-2003, 08:49

Of course that I used different connector, I am not new in this forum.
On the connector for 3510, I used next pin
1 2 3
4 5 6

2-GND
4-RX
5-Mbus
6-TX
1,3 has no pin on the connector.
I also connected external power 5V but the same.
Also when I started program without any connection I get the same message
"Unable to get phone version" is it correct?
Please help me, and thanks to all who made answer.
Thanks guys

NSerN · 06-17-2003, 15:41

Try Pin 10 of chip direct connect to TX without diode and resistor (use only FBus)!!! And try connect to other SW for example: LogoMan.

erogsm · 06-17-2003, 15:44

I said that I am not newbie, but I AM STUPID AND NEWBIE

Sorry to all expacialy to NserN and Drug_Store.

I changed the RX and TX on the cable for 3510 and works fine now.
Still one more sorry to all, and anyway thanks who made answer.
Regards

06-17-2003, 00:07	#1 (permalink)
erogsm No Life Poster Join Date: Jul 2001 Location: EU Posts: 579 Member: 5423 Status: Offline Thanks: 39 Thanked 10 Times in 6 Posts	Why,why,why,why!!! Dear friends, please could someone tell me what is wrong. I used normal F/Mbus cable, and with Rolis 1.8 I can read phone info (i.e.3310), and with the same cable can't read phone info of DTC4(3510) with bWinlock 1.0.6 from B-phreaks. Always get "unable to read phone info". The same message get also if I don't connect cable to 3510. I tried connect external 5V to max232 but always a same. I used correct F/Mbus cable (PIN10 of chip connect via diode to RX and via resistor 1KOhm to Tx, Pin 9 of chip direct connect to RX). But don't think that is cable errors, because without cable when I started program bWinlock 1.0.6 get the same message above. I used Win98. Please I really ask for help. I searched on forum and don't found answer. Please still one more help me Regards to all

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-17-2003, 08:25	#3 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 696 Member: 8599 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	How you can use for 3510 same cable as for 3310!!!??? not only pinout diff but connector diff. too???

06-17-2003, 08:49	#4 (permalink)
erogsm No Life Poster Join Date: Jul 2001 Location: EU Posts: 579 Member: 5423 Status: Offline Thanks: 39 Thanked 10 Times in 6 Posts	Of course that I used different connector, I am not new in this forum. On the connector for 3510, I used next pin 1 2 3 4 5 6 2-GND 4-RX 5-Mbus 6-TX 1,3 has no pin on the connector. I also connected external power 5V but the same. Also when I started program without any connection I get the same message "Unable to get phone version" is it correct? Please help me, and thanks to all who made answer. Thanks guys

06-17-2003, 15:41	#5 (permalink)
NSerN No Life Poster Join Date: Jan 2002 Location: Russia Posts: 696 Member: 8599 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	Try Pin 10 of chip direct connect to TX without diode and resistor (use only FBus)!!! And try connect to other SW for example: LogoMan.

06-17-2003, 15:44	#6 (permalink)
erogsm No Life Poster Join Date: Jul 2001 Location: EU Posts: 579 Member: 5423 Status: Offline Thanks: 39 Thanked 10 Times in 6 Posts	I said that I am not newbie, but I AM STUPID AND NEWBIE Sorry to all expacialy to NserN and Drug_Store. I changed the RX and TX on the cable for 3510 and works fine now. Still one more sorry to all, and anyway thanks who made answer. Regards