1112 strange LCD problem - GSM-Forum

celluniversal · 07-08-2007, 09:45

1112 no display

I checked with new display

I checked all the LCD tracks all fine

I changed new display connector

Still same status

amei8141 · 07-08-2007, 09:51

posible with sw prob

celluniversal · 07-09-2007, 06:03

Quote:

Originally Posted by amei8141

posible with sw prob

This is not a software problem.Phone is getting on and off,Incoming calls also no problem.Only no display.

Anyhow i flashed the phone too.No result same status

yashtel · 07-09-2007, 06:29

check your connection through reverse technology...............

celluniversal · 07-09-2007, 11:48

Quote:

Originally Posted by yashtel

check your connection through reverse technology...............

I can't understand wht u r saying,Explain more

guedes666 · 07-09-2007, 11:57

try to flash the phone with last SW version i think 6.41 if not works, try this CNT file and post the result

B.R.
guedes666

wasee8882 · 07-09-2007, 12:12

yeh brother its software problem ..

celluniversal · 07-11-2007, 06:43

I tried all the way in the software.

Made full erase and Flashed with V5.54 and V6.01 no use

Tried with erase file also

Tried 3 different Pm files no use(MHZ pm,RepairPM,etc.)

Tried in UFS,JAF and universal box

It was 100% hardware problem.Have any guide?

lolan · 09-17-2007, 14:13

Quote:

Originally Posted by yashtel

check your connection through reverse technology...............

pls explain what is reverse technology..............

lolan · 09-17-2007, 14:32

Quote:

Originally Posted by celluniversal

1112 no display

I checked with new display

I checked all the LCD tracks all fine

I changed new display connector

Still same status

did u fix this........
canwe chat now.
my id is [email protected] or [email protected]

Tariq Khan · 10-18-2007, 09:48

Quote:

Originally Posted by celluniversal

1112 no display

I checked with new display

I checked all the LCD tracks all fine

I changed new display connector

Still same status

when U power on the mobile Lcd light is on?

digitized · 10-18-2007, 12:30

Quote:

Originally Posted by celluniversal

1112 no display

I checked with new display

I checked all the LCD tracks all fine

I changed new display connector

Still same status

brthr change the three resistence near the cpu ..these resistence are between the track... if then ur problem not solve then reball or change cpu...

Muneer Ahmed · 10-18-2007, 13:13

It is a software problem. Try to flash the phone when the lcd is attached, if it does not work then try to flash the phone without LCD and then attach the same or any other LCD....try and post the result if it works or not?

BR
Muneer Ahmed

rana_sab · 01-02-2008, 15:19

Connect the phone with UFS and then click info if you see LCD : Unknown
its mean your LCD track is broken re check all the tracks if all tracks is ok then its UPP fault try to rehot the UPP carefully

shahidkhan1 · 01-02-2008, 20:26

first flash the set with 6.9 ver. or 6.4 ver. then change the resistancs one by one i hope ur problem wil solve

07-08-2007, 09:45	#1 (permalink)
celluniversal No Life Poster Join Date: Apr 2005 Age: 45 Posts: 1,263 Member: 139388 Status: Offline Thanks Meter: 98	1112 strange LCD problem 1112 no display I checked with new display I checked all the LCD tracks all fine I changed new display connector Still same status

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 1112 Strange Keypad problem..Experts Help me.	rk_grover77	Nokia Hardware & Hardware Repair	16	06-27-2013 09:37
Strange LCD Problem - K750i	wonkypants	Sony Ericsson Hardware Repair	3	12-01-2006 12:01
K750i HELP - Strange LCD Problem - Please Read	shahzad9	Sony Ericsson Hardware Repair	0	12-31-2005 18:29
GD87 Strange LCD problem	Konnect 2K	Panasonic	2	12-19-2003 21:21
Very strange LCD problem.......	Abe	Nokia Hardware & Hardware Repair	7	06-17-2002 04:24

07-08-2007, 09:51	#2 (permalink)
amei8141 No Life Poster Join Date: May 2006 Location: in the corner Age: 35 Posts: 544 Member: 285779 Status: Offline Thanks Meter: 49	posible with sw prob

07-09-2007, 06:29	#4 (permalink)
yashtel No Life Poster Join Date: Aug 2005 Location: SILIGURI Age: 46 Posts: 828 Member: 170589 Status: Offline Thanks Meter: 1,848	check your connection through reverse technology...............

07-09-2007, 12:12	#7 (permalink)
wasee8882 Freak Poster Join Date: Dec 2005 Location: KARACHI Posts: 144 Member: 207488 Status: Offline Thanks Meter: 5	yeh brother its software problem ..

07-11-2007, 06:43	#8 (permalink)
celluniversal No Life Poster Join Date: Apr 2005 Age: 45 Posts: 1,263 Member: 139388 Status: Offline Thanks Meter: 98	I tried all the way in the software. Made full erase and Flashed with V5.54 and V6.01 no use Tried with erase file also Tried 3 different Pm files no use(MHZ pm,RepairPM,etc.) Tried in UFS,JAF and universal box It was 100% hardware problem.Have any guide?

10-18-2007, 13:13	#13 (permalink)
Muneer Ahmed Freak Poster Join Date: Mar 2004 Location: United Arab Emirates Age: 33 Posts: 470 Member: 60500 Status: Offline Thanks Meter: 2	It is a software problem. Try to flash the phone when the lcd is attached, if it does not work then try to flash the phone without LCD and then attach the same or any other LCD....try and post the result if it works or not? BR Muneer Ahmed

01-02-2008, 20:26	#15 (permalink)
shahidkhan1 Insane Poster Join Date: Jan 2008 Posts: 78 Member: 669218 Status: Offline Thanks Meter: 11	first flash the set with 6.9 ver. or 6.4 ver. then change the resistancs one by one i hope ur problem wil solve