1112 strange LCD problem

[milkyctg]

This is 100% hardware problem. Check all lcd connections. Firstly put negetive probe with ground and check all connection with positive probe and vicee versa ( This is reverse technology meant by yashtel). Finally repair all connections with a needle.

[jimm07ct]

Originally Posted by celluniversal

1112 no display

I checked with new display

I checked all the LCD tracks all fine

I changed new display connector

Still same status

bro,


if you tried by softwere , then you can try this pic

you say display line is ok


try to jump like this pic may helpful for you


and also reply


best of luck

[lucky_lashar]

first try to full flash and then select this erase_1112.flf as Flash file......click flash will bee done

[ABUU YUUNUS]

Originally Posted by celluniversal

1112 no display

I checked with new display

I checked all the LCD tracks all fine

I changed new display connector

Still same status

TRY AND CHECK THE TWO CAPACITORS BESIDE THE LCD SOCKET ON THE PANEL FOR OXIDATION. IT MAY BE THAT THE SOLDER POINTS ON WHICH THEY ARE FIXED ARE OXIDATED AND WILL NEED TO BE REPAIRED.