1650 dead - GSM-Forum

celldoct · 01-12-2009, 15:41

bro i have a 1650 it flashes mcu&ppm but wen cnt flash does not go to local mode ...... normally also it does not go to local mode ...how to solve this
AT

gm33223322 · 01-14-2009, 12:24

try erase 1st....... n flash it again.......

kritz01 · 01-14-2009, 12:34

Quote:

Originally Posted by gm33223322

try erase 1st....... n flash it again.......

if no luck try other version lower/higher post result

celldoct · 01-14-2009, 15:07

no luck sir still dead

samirov-gsm · 01-14-2009, 18:18

use flash last version....good luck

nathaniel-1 · 01-16-2009, 11:00

help needed for 1650 no lcd light,thanks in advance

metro2mobile · 01-16-2009, 14:50

brother rehot uem and post reply

vipost · 01-23-2009, 20:13

Brother, the SOLUTION:

If the phone (1650) not in "Local Mode" go
or does not change between "Local- Test- Normal Mode,"
then you have the lower (the first from the bottom) Contact terminal stripping:
phone's a piece of adhesive tape on it, but only there!
or equal to cable it off.

Have 2 units after several full-Erase operations revived.
Does not matter what SW v. geflasht will
JAF with all-v. runs equally well, with error messages,
but it is normal and not bad.

01-12-2009, 15:41	#1 (permalink)
celldoct Insane Poster Join Date: Dec 2006 Posts: 98 Member: 404765 Status: Offline Thanks Meter: 19	1650 dead bro i have a 1650 it flashes mcu&ppm but wen cnt flash does not go to local mode ...... normally also it does not go to local mode ...how to solve this AT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1650 dead-flashing ok-but still in dead-help	zone3	Nokia Hardware & Hardware Repair	3	06-22-2009 09:49
1650 dead	tajinder	Nokia Digital Core Technology 4 ( DCT-4 )	22	06-01-2008 12:32
1650 dead . . . Flashing OK but not show Local Mode.	swechacnu	Nokia Digital Core Technology 4 ( DCT-4 )	7	04-13-2008 11:43

01-14-2009, 12:24	#2 (permalink)
gm33223322 Freak Poster Join Date: Feb 2006 Location: Medan - Indonesia Age: 43 Posts: 400 Member: 233686 Status: Offline Thanks Meter: 50	try erase 1st....... n flash it again.......

01-14-2009, 15:07	#4 (permalink)
celldoct Insane Poster Join Date: Dec 2006 Posts: 98 Member: 404765 Status: Offline Thanks Meter: 19	no luck sir still dead

01-14-2009, 18:18	#5 (permalink)
samirov-gsm No Life Poster Join Date: Apr 2008 Posts: 4,525 Member: 759168 Status: Offline Thanks Meter: 12,866	use flash last version....good luck

01-16-2009, 11:00	#6 (permalink)
nathaniel-1 Insane Poster Join Date: Aug 2007 Location: india Posts: 79 Member: 575112 Status: Offline Thanks Meter: 62	help needed for 1650 no lcd light,thanks in advance

01-16-2009, 14:50	#7 (permalink)
metro2mobile No Life Poster Join Date: May 2007 Posts: 1,181 Member: 515972 Status: Offline Thanks Meter: 526	brother rehot uem and post reply

01-23-2009, 20:13	#8 (permalink)
vipost Junior Member Join Date: Sep 2007 Posts: 15 Member: 597058 Status: Offline Thanks Meter: 1	Brother, the SOLUTION: If the phone (1650) not in "Local Mode" go or does not change between "Local- Test- Normal Mode," then you have the lower (the first from the bottom) Contact terminal stripping: phone's a piece of adhesive tape on it, but only there! or equal to cable it off. Have 2 units after several full-Erase operations revived. Does not matter what SW v. geflasht will JAF with all-v. runs equally well, with error messages, but it is normal and not bad.