2100 dead

[lidar]

I have nokia 2100 dead.When i'm flashing...can write until 100% but it's some cannot power on.So..i'm read that's Rom can't save file.n can't read versi software.I'm change until 4 times.but some..please..help me for solved my problem..thanks b4

Lidar
icq:335240676

[gsmrazvan]

use modified knok and write full flash with latest version
repair imei

[lidar]

i use knok,geoflash,prodigy...up version,down version it's not succsees..please..help me...i think this hardware problem.

[MrHazeem]

When u can flash but no power ...., Most cases combined flash+ram faulty ....,

try reball/change ,

But first be sure that the flash image is good one ..., try read a full flash

image from a working phone and upload it to the dead phone,

Good Luck


---------------
MrHazeem

[lidar]

Thanks for replay...
But i'm try change ROM 4 times..N that's ROM is very good..because i'm use in 8250 n upload with file 8250 can power on.n in 2100..that's ROM cann't save flash image when i read for version software but in 8250 is ok .i don't know this problem...because like ccont,cobba,26mhz is good.maybe line between cpu n rom broken?...

[MrHazeem]

What SW u use to write / read flash ...?

if u use knok u may need to modify some files in order to work fine with 2100,try seach in this forum u will find the solution, search word (flash 2100 knok),

if u have griffin try use it it is better....



Good Luck


------------------
MrHazeem

[lidar]

thanks mrhazeem...
i use knok with modified 2100,n prodigy too,geo flash..but problem still some..that's file flash n tools is good n running.not problem in my tools n file because i use in other 2100 running perfixs.
please help..


lidar
icq:229794383

[MrHazeem]

How do u know that flash did not hold data ... ?

did u read it again and compare it ...? Or u can not read it ...? more details ...!!!



-------------------
MrHazeem

[lidar]

i can read...but mcu and all failed.because i can write my file in that's rom n running 100%.

huh...i hate this phone...

[Disaster]

I have same problem, can write flash with Knok or GEO (Prodigy cant), but then read flash- it very different from original. Read info with geo- MCU ver "5dgrg'[gfrgg .. bla bla bla"

[MrHazeem]

Now try change combined ( flash + Ram ) with original one , then flash it .....


Good Luck


------------
MrHazeem

[lidar]

i trying with original have 2100 normal..i flash...n running but phone can't power on..i think problem not in flash..n when reading mcu n other's failed...why 4 flash can't save file?

[intersoft]

my problem is also same

pls give som solution

[princemf]

try to flash it using original flash with knock if not ok try to flash using griffin
finall try to rehot it then flash if not ok send it to hell

[zaman1985]

Lead's kNok-Phoenix - build 1
based on kNok - Engine build 22, Frontend build 18

Thanks goes out for the following:
Dejan, Kodo, Viper, Jozso (for hardware and cable support
and of course beta testing), Bph&Co, Saras, IceDragon,
Steina, Epilog, Invisible, Jethro, H-tom, AlAraf, Lead
and all the others who supports knok...
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : detected NMP is NAM-2
Cannot prepare phone


help me please