2100 need help - GSM-Forum

aryan_ · 03-03-2008, 13:42

n2100 lights only i had flashed it with ufs ,it flash ok but at last it can't register flash id and the err is Flash Id Failed esId any one pls tell me what is this problem

aryan_ · 03-03-2008, 13:49

any one plz help its urgent

yopie_3cell · 03-03-2008, 14:09

try to flash with pmm file too. if you get flash id error, maybe your flash ic is damage.

aryan_ · 03-03-2008, 14:12

cani use flash ic from any other mother board

recallrules · 03-03-2008, 14:16

reheat the flash... if not works then u can replace it from another 2100 board (hope that ic is not faulty)

recallrules

yopie_3cell · 03-03-2008, 14:26

Quote:

Originally Posted by aryan_

cani use flash ic from any other mother board

yes, you can use flash ic from other, and you can use flash ic from 8250, 8210, 3610. But you must full erase and flash again with file flash for 2100. and don't forget to use pmm file.

aryan_ · 03-03-2008, 14:49

thanks all i had changed its flash ic now works ok

03-03-2008, 13:42	#1 (permalink)
aryan_ No Life Poster Join Date: Apr 2006 Location: everywhere Posts: 582 Member: 256027 Status: Offline Thanks Meter: 52	2100 need help n2100 lights only i had flashed it with ufs ,it flash ok but at last it can't register flash id and the err is Flash Id Failed esId any one pls tell me what is this problem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FuriousGold & NEW CABLES SET 2010 (UPDATED 30 MARS 2010) NEED HELP	FuriouS TeaM	FuriousGold	66	08-27-2010 13:20
need help master manole n95-8gb write screen restart	haslyn	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	15	03-30-2010 10:56
2100 need help	aryan_	Nokia Hardware & Hardware Repair	13	10-08-2007 20:23
2100 turk t9 flash file need help me	allfreegsm	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-06-2003 11:23
2100 mod flash with 60 ringtones, need help !	gants	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-16-2003 19:09

03-03-2008, 13:49	#2 (permalink)
aryan_ No Life Poster Join Date: Apr 2006 Location: everywhere Posts: 582 Member: 256027 Status: Offline Thanks Meter: 52	any one plz help its urgent

03-03-2008, 14:09	#3 (permalink)
yopie_3cell Freak Poster Join Date: Oct 2007 Posts: 143 Member: 606433 Status: Offline Thanks Meter: 14	try to flash with pmm file too. if you get flash id error, maybe your flash ic is damage.

03-03-2008, 14:12	#4 (permalink)
aryan_ No Life Poster Join Date: Apr 2006 Location: everywhere Posts: 582 Member: 256027 Status: Offline Thanks Meter: 52	cani use flash ic from any other mother board

03-03-2008, 14:16	#5 (permalink)
recallrules Freak Poster Join Date: Jan 2007 Location: @ planet EARTH Posts: 341 Member: 433173 Status: Offline Sonork: 100.1590587 Thanks Meter: 31	reheat the flash... if not works then u can replace it from another 2100 board (hope that ic is not faulty) recallrules

03-03-2008, 14:49	#7 (permalink)
aryan_ No Life Poster Join Date: Apr 2006 Location: everywhere Posts: 582 Member: 256027 Status: Offline Thanks Meter: 52	thanks all i had changed its flash ic now works ok