2100 self charging - GSM-Forum

fotisvoula · 10-29-2004, 10:43

Hello friends.
I have a 2100 with selfcharging problem.
Does somebody can help me?
thank you

pazeth™ · 10-29-2004, 16:40

change CCONT and make full flash using geoflash

MaFiaaa · 10-29-2004, 17:54

CCONT but thats hard way to change this is protiction

Azampk · 10-29-2004, 18:05

first of all chek fuse than think to chang any thing

WBR

AZAMPK

Mobile Master Pk · 10-29-2004, 18:45

this problem is hardware

pazeth™ · 10-29-2004, 19:09

try to change changer IC if problem persist change CCONT..

SRNOURI · 10-29-2004, 23:24

This problem is not CCONT or charging IC.Your phone has lost link near charging IC.It's resonse is water damage.If you have any picture of 2100 board I can help you with showing lost link place.

johnny_liang · 10-30-2004, 19:47

try full factory your phone first

daanish · 10-31-2004, 03:20

hi jus put a jump wire from + of battery termenal to an empty conection near R220 resis, that will solve the problem i have done it many times in 8210 is the same way also
Daanish

fotisvoula · 10-31-2004, 16:45

Thank you all of you for your help. I fixed the problem with Daanish's idea.
I just made the jumper and all is OK.

Thank you again

10-29-2004, 10:43	#1 (permalink)
fotisvoula Insane Poster Join Date: Jul 2004 Location: Greece Age: 54 Posts: 64 Member: 73728 Status: Offline Thanks Meter: 0	2100 self charging Hello friends. I have a 2100 with selfcharging problem. Does somebody can help me? thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3250 auto charge ( self charging )	newstudent	Nokia Hardware & Hardware Repair	5	04-20-2009 03:54
2100 self charging	sonetek	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	13	08-04-2008 07:41
Self-Charging Solution for 2100	merulez29	Nokia Hardware & Hardware Repair	7	02-28-2005 20:42
2100 self charging	.:::Dr. Cell:::.	Nokia Hardware & Hardware Repair	6	01-28-2005 17:00
c35 self charging	gsmsalers	Siemens Hardware Repair Area	3	05-10-2002 22:59

10-29-2004, 16:40	#2 (permalink)
pazeth™ No Life Poster Join Date: Jul 2004 Location: BANDA ACEH INDONESIA Posts: 1,268 Member: 74519 Status: Offline Thanks Meter: 79	change CCONT and make full flash using geoflash

10-29-2004, 17:54	#3 (permalink)
MaFiaaa No Life Poster Join Date: Mar 2004 Age: 46 Posts: 577 Member: 57930 Status: Offline Thanks Meter: 24	CCONT but thats hard way to change this is protiction

10-29-2004, 18:05	#4 (permalink)
Azampk No Life Poster Join Date: Jun 2003 Age: 37 Posts: 865 Member: 30303 Status: Offline Sonork: 1001579198 Thanks Meter: 17	first of all chek fuse than think to chang any thing WBR AZAMPK

10-29-2004, 18:45	#5 (permalink)
Mobile Master Pk No Life Poster Join Date: May 2004 Location: M Arshed Khan Age: 55 Posts: 577 Member: 66225 Status: Offline Thanks Meter: 9	this problem is hardware

10-29-2004, 19:09	#6 (permalink)
pazeth™ No Life Poster Join Date: Jul 2004 Location: BANDA ACEH INDONESIA Posts: 1,268 Member: 74519 Status: Offline Thanks Meter: 79	try to change changer IC if problem persist change CCONT..

10-29-2004, 23:24	#7 (permalink)
SRNOURI Freak Poster Join Date: May 2003 Age: 48 Posts: 338 Member: 29870 Status: Offline Thanks Meter: 24	This problem is not CCONT or charging IC.Your phone has lost link near charging IC.It's resonse is water damage.If you have any picture of 2100 board I can help you with showing lost link place.

10-30-2004, 19:47	#8 (permalink)
johnny_liang No Life Poster Join Date: Mar 2003 Location: Nowhere Age: 44 Posts: 636 Member: 25067 Status: Offline Thanks Meter: 81	try full factory your phone first

10-31-2004, 03:20	#9 (permalink)
daanish Freak Poster Join Date: Aug 2004 Location: The great pakistan Posts: 384 Member: 79823 Status: Offline Thanks Meter: 26	hi jus put a jump wire from + of battery termenal to an empty conection near R220 resis, that will solve the problem i have done it many times in 8210 is the same way also Daanish

10-31-2004, 16:45	#10 (permalink)
fotisvoula Insane Poster Join Date: Jul 2004 Location: Greece Age: 54 Posts: 64 Member: 73728 Status: Offline Thanks Meter: 0	Thank you all of you for your help. I fixed the problem with Daanish's idea. I just made the jumper and all is OK. Thank you again