2300 Problems - GSM-Forum

ahmedksal · 10-16-2004, 15:34

Hi,
I Have Come Across About 10 Phones With This Same Problem. Nokia 2300 About A Week Old Only White Light On Screen When Powered On. Tried To Detect Phone On Griffin - Errors. Tried Prodigy - Could Not Find Phone, Tried Ufs - Unable To Detect Phone.
So The Only Way Is To Flash Erase File As Ppm And Then Grifiin Gives Error, After That You Can Full Flash Phone And The Phone Is Alive But It Says Insert Correct Sim, Perform Unlock And Phone Is Working But There Is No Reception. Imei Is 100% Correct. Import Pmm Values And Load 2300pm File To Phone Then You Have A White Screen Again. Is There Any Way To Fix This Problem. Thanks.

pazeth™ · 10-16-2004, 16:38

too many trouble with nokia 2300, like ringtones fault, no light on screen, etc, but solution is UEM changing, it hard work cause can damage phone seriously..., sometime when I change led on 3310 phone die...

sycoza raptor · 10-16-2004, 23:55

I dont think yu have to change the uem, make sure you flashing properly,otherwise contact me

Imran_Khatri · 10-17-2004, 08:45

First Flash the phone MCU+PPM, And then just write pm values to phone and then do init sim lokcs, and then full factory default............Remember dont unplug cable until u complete the process...

WBR
Imran Khatri

MELDON BA · 10-17-2004, 15:06

1. Erase Flash
2. Flash Mcu And Ppm
3. Write Pm
4. Flash Mcu And Ppm
5. Init Simlocks
6. Full Factory Setting
7. Have A Nice Day

10-16-2004, 15:34	#1 (permalink)
ahmedksal No Life Poster Join Date: Jul 2003 Location: LEBANON Posts: 2,755 Member: 33690 Status: Offline Thanks Meter: 3,398	2300 Problems Hi, I Have Come Across About 10 Phones With This Same Problem. Nokia 2300 About A Week Old Only White Light On Screen When Powered On. Tried To Detect Phone On Griffin - Errors. Tried Prodigy - Could Not Find Phone, Tried Ufs - Unable To Detect Phone. So The Only Way Is To Flash Erase File As Ppm And Then Grifiin Gives Error, After That You Can Full Flash Phone And The Phone Is Alive But It Says Insert Correct Sim, Perform Unlock And Phone Is Working But There Is No Reception. Imei Is 100% Correct. Import Pmm Values And Load 2300pm File To Phone Then You Have A White Screen Again. Is There Any Way To Fix This Problem. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2300 problem with pmm	MadPhone	UFS2 + UFS3-Tornadoflasher	7	10-14-2006 20:10
2300 problem	--==Dixon==--	Nokia Digital Core Technology 4 ( DCT-4 )	14	05-24-2005 12:27
2300 problem after flashing	imran_qasim	Nokia Digital Core Technology 4 ( DCT-4 )	8	05-03-2005 03:07
new 2300 problem (radio & auto-shutoff)	etcelfon	Nokia Hardware & Hardware Repair	2	04-20-2005 08:05

10-16-2004, 16:38	#2 (permalink)
pazeth™ No Life Poster Join Date: Jul 2004 Location: BANDA ACEH INDONESIA Posts: 1,268 Member: 74519 Status: Offline Thanks Meter: 79	too many trouble with nokia 2300, like ringtones fault, no light on screen, etc, but solution is UEM changing, it hard work cause can damage phone seriously..., sometime when I change led on 3310 phone die...

10-16-2004, 23:55	#3 (permalink)
sycoza raptor Freak Poster Join Date: Mar 2004 Location: in the heart of africa Posts: 148 Member: 59796 Status: Offline Thanks Meter: 0	I dont think yu have to change the uem, make sure you flashing properly,otherwise contact me

10-17-2004, 08:45	#4 (permalink)
Imran_Khatri No Life Poster Join Date: Mar 2004 Location: Pakistan Age: 42 Posts: 1,416 Member: 56561 Status: Offline Sonork: 100.114006 Thanks Meter: 41	First Flash the phone MCU+PPM, And then just write pm values to phone and then do init sim lokcs, and then full factory default............Remember dont unplug cable until u complete the process... WBR Imran Khatri

10-17-2004, 15:06	#5 (permalink)
MELDON BA Freak Poster Join Date: May 2004 Location: QUIAPO,MANILA CITY PLAZA Posts: 292 Member: 65015 Status: Offline Thanks Meter: 7	1. Erase Flash 2. Flash Mcu And Ppm 3. Write Pm 4. Flash Mcu And Ppm 5. Init Simlocks 6. Full Factory Setting 7. Have A Nice Day