2610 blue display - GSM-Forum

jasir_kp · 12-13-2008, 03:56

2610 LCD broken.I changed new LCD works fine for 30sec then the display goes to blue screen

^^^RAVI SOOD^^^ · 12-13-2008, 06:56

try and post.................

kmpatel · 12-17-2008, 18:34

just resolder conector, post reply.

PARANNJMF · 02-07-2009, 05:11

Quote:

Originally Posted by jasir_kp

2610 LCD broken.I changed new LCD works fine for 30sec then the display goes to blue screen

i have one 2610 mobile same this prob...

any one know this solution ?

Cellcraft India · 02-07-2009, 05:15

First of all check display connector,it may look fine but it can cause problems.Dry solderings and tracks can also cause similar problems.

jakkarzoya_2511 · 02-07-2009, 05:24

Quote:

Originally Posted by jasir_kp

2610 LCD broken.I changed new LCD works fine for 30sec then the display goes to blue screen

1st give full detail when going blue disp incoming outgoing perfect or no?

when incoming outgoing perfect so ur dc track check n line or not incoming outgoing rebol upp 100%solw u r pro reply post

kurip · 02-07-2009, 05:24

i have this problem to..i do
1. lcd
2. conector lcd..
3. flash with late version
4. cek track lcd

but problem still same..any one have solution please

MEDIA_NADIM · 02-07-2009, 08:26

Quote:

Originally Posted by kurip

i have this problem to..i do
1. lcd
2. conector lcd..
3. flash with late version
4. cek track lcd

but problem still same..any one have solution please

slide heat cpu or rebolling or chang cpu

metro2mobile · 02-07-2009, 09:03

yes brother rehot and rebol upp then not ok chang upp 100%

good luck

kurip · 02-07-2009, 19:17

Quote:

Originally Posted by metro2mobile

yes brother rehot and rebol upp then not ok chang upp 100%

good luck

thanks but you tested this ?????

vishal123123 · 02-07-2009, 20:09

change cpu 100% solution tested................

doublex_gsm · 02-05-2010, 11:09

Quote:

Originally Posted by jasir_kp

2610 LCD broken.I changed new LCD works fine for 30sec then the display goes to blue screen

I just reheat UPP and now phone is working....Try before change.....

12-13-2008, 03:56	#1 (permalink)
jasir_kp Freak Poster Join Date: Feb 2008 Location: india Posts: 382 Member: 705281 Status: Offline Thanks Meter: 55	2610 blue display 2610 LCD broken.I changed new LCD works fine for 30sec then the display goes to blue screen

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 1200 blank display & 1208 blue display solution	mobilecitycbk	Nokia Hardware & Hardware Repair	4	11-27-2017 23:01
nokia 1112,1600,2626,2610,6030 display light problem	sekharsun28	Nokia Hardware & Hardware Repair	38	05-17-2013 07:03
rd 3510v4 blue display during unlok by rd unloker	bob9102	Various CDMA/TDMA Cell Phones	4	03-30-2010 08:29
7250i no graphic 0n display only blue display	pratik_1111	Nokia Hardware & Hardware Repair	2	10-22-2007 21:41
blue Display in Nokia Cellphones	TheDon	Nokia Hardware & Hardware Repair	0	10-29-1999 18:28

12-13-2008, 06:56	#2 (permalink)
^^^RAVI SOOD^^^ No Life Poster Join Date: Nov 2008 Location: nakodar Posts: 1,020 Member: 903492 Status: Offline Sonork: 1590666 Thanks Meter: 571	try and post.................

12-17-2008, 18:34	#3 (permalink)
kmpatel Junior Member Join Date: Sep 2004 Location: VADODARA<GUJARAT<INDIA Age: 57 Posts: 26 Member: 80456 Status: Offline Thanks Meter: 7	just resolder conector, post reply.

02-07-2009, 05:15	#5 (permalink)
Cellcraft India Freak Poster Join Date: Jun 2006 Location: KERALA , INDIA Posts: 442 Member: 287529 Status: Offline Thanks Meter: 62	First of all check display connector,it may look fine but it can cause problems.Dry solderings and tracks can also cause similar problems.

02-07-2009, 05:24	#7 (permalink)
kurip Freak Poster Join Date: Jun 2007 Location: bukittinggi Posts: 195 Member: 526318 Status: Offline Sonork: dc2000 Thanks Meter: 42	i have this problem to..i do 1. lcd 2. conector lcd.. 3. flash with late version 4. cek track lcd but problem still same..any one have solution please

02-07-2009, 09:03	#9 (permalink)
metro2mobile No Life Poster Join Date: May 2007 Posts: 1,181 Member: 515972 Status: Offline Thanks Meter: 526	yes brother rehot and rebol upp then not ok chang upp 100% good luck

02-07-2009, 20:09	#11 (permalink)
vishal123123 No Life Poster Join Date: Mar 2007 Location: INDIA Posts: 879 Member: 463150 Status: Offline Thanks Meter: 91	change cpu 100% solution tested................