2650 with blue LCD !!
 

Hi ,,

i have 2650 only blue lcd , any one can help ?

@GSM_HACKING2003

Does it boot first of all ?

Do you get light in all 5 LED's on the main board ? or only the 2 top LED's ?

I had a similar one some time back with excat same fault, only the 2 top LED's were lighting up, the other 3 small LED's did not.... UPP change solved the problem (Be aware it glued)

Regards

change flexybel
Sure oK

i changed flxyblel but the lcd is bleu yet

I also have this problem. After changing the flex and lcd(as the original was broken) phones works when i start, but when i close the flip(one side over the other) light come on the screen but it rest blue. I have full flashed the phone but it does same things...

try by changing lcd . may be lcd version problem:confused:

chack it
 

chack it and post result

2600-2650?
 

HI.try by changing lcd .OR FLASH-CHK CANEKTOR LCD.:)

May be the trauma wich brakes the screen , also crackes any socket pin !!?

i have the same problem and i think it's due to magnetic sensor because when try it with no magnetic it works...may be i need another LCD ,because i changed it!!!!!!!

I have this problem too and couldn't solve it.I changed the flip detector but no result.:( :(

jst change the lcd. i had one with similer problem bt after changing tha lcd phone worked fine

i had the same problem resovlved it with flet cable change

first check wat lcd u r using 7210 lcds normally wont work for 2650 remember.. does the flx cable work properly.. flash the phone wit latest version if you wan to use 7210 lcds sometimes it work wit some phone.. i've tried b4.. but better use 2650lcds it self

try flash with v.4.19 if ur phone dead reflash with last vision then change LCD .i take from 6030 is ok
BR