3100 Erasing Problem - GSM-Forum

rishu · 01-05-2007, 13:44

dear experts
i have a dead 3100
it show 1st boot ok in ufsx
but when i want to flash it it show the erasing error

1st Boot Ok, DCT4, UPP: 1120
Fl0: 0x01000000-0x01FFFFFF,90797FA4,
Algorithm: u_intel.fia, Ver: 4.49.0
Algorithm Ok, MSID: 8451D876CF1253D9D3076A0933
Decoded MSID: 8FA4BAE9-0054E6E9-A8000000
Encoded FAID: 2E3E9522-F78C2F59-509C7AB8
Erasing: 0x01000000-0x0100FFFF ...
Erasing Error: 10, at: 0x01000000-0x0100FFFF, 940207, Time: 00:00
Process Failed, Repowering Mobile

i reball the flash ic and UPP also the problem is still remain

pls experts help me solve this problem

capri · 01-05-2007, 17:38

Flash IC still the problem mate... do it again, apply good flux to Flash IC reheat your ic not good contact @ the board.

.:KHALIFA:. · 01-05-2007, 20:28

first reball cpu... if dont work than reball falsh....

HUM · 01-06-2007, 02:47

change flash ic,ur problem is 100% solved.

rishu · 01-06-2007, 12:32

Quote:

Originally Posted by HUM

change flash ic,ur problem is 100% solved.

if i change the Flash IC,
can i want to change the UEm also

~mr_Ten$ion~ · 01-06-2007, 17:58

Change Flash UIc & then Full Flash ........... No need Change UEM .... Thanz
BR

.:KHALIFA:. · 01-06-2007, 20:10

Quote:

Originally Posted by Mr_Attock

Change Flash UIc & then Full Flash ........... No need Change UEM .... Thanz
BR

can u explain breifly ... how can v change flash without changing uem in dct4

ferrydejan · 01-27-2007, 08:54

Quote:

Originally Posted by Mr_Attock

Change Flash UIc & then Full Flash ........... No need Change UEM .... Thanz
BR

Yes, No need replace UEM. Just Flash with proper firmware, write flash Rpl ,write PM, and unlock. Phone will be ok

Gsm_pro · 01-27-2007, 09:40

Check fia file from phoenix,if ok try erase again...
Or flash IC probem..

jaggi · 01-27-2007, 11:37

reball flash ic flash with jaf if not work then change ur flash ic firt erase full flash then flash normally 100%%%%%%%%%% solved

adnanali · 01-27-2007, 23:31

no all of you with very sorry no idea just flash set with Mt-box by disable vpp method and all will be 100000000000000000% ok this error remove with MT-box nicely with out any changes sorry to all of you my brothers

adnanali · 01-27-2007, 23:33

in this error specialy Mt-box only help and other all failed

01-05-2007, 13:44	#1 (permalink)
rishu Freak Poster Join Date: Nov 2005 Location: BHARAT Age: 44 Posts: 292 Member: 200634 Status: Offline Thanks Meter: 41	3100 Erasing Problem dear experts i have a dead 3100 it show 1st boot ok in ufsx but when i want to flash it it show the erasing error 1st Boot Ok, DCT4, UPP: 1120 Fl0: 0x01000000-0x01FFFFFF,90797FA4, Algorithm: u_intel.fia, Ver: 4.49.0 Algorithm Ok, MSID: 8451D876CF1253D9D3076A0933 Decoded MSID: 8FA4BAE9-0054E6E9-A8000000 Encoded FAID: 2E3E9522-F78C2F59-509C7AB8 Erasing: 0x01000000-0x0100FFFF ... Erasing Error: 10, at: 0x01000000-0x0100FFFF, 940207, Time: 00:00 Process Failed, Repowering Mobile i reball the flash ic and UPP also the problem is still remain pls experts help me solve this problem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3100 Erase Failed	celluniversal	Nokia Digital Core Technology 4 ( DCT-4 )	17	07-09-2007 02:43
need 3100 erase file	HUM	Nokia Hardware & Hardware Repair	2	12-24-2006 07:42
i need 3100 erase file	kardelen gsm	Nokia Digital Core Technology 4 ( DCT-4 )	0	04-16-2005 10:18
i need 3100 erase file	kardelen gsm	Nokia Digital Core Technology 4 ( DCT-4 )	0	04-16-2005 08:59
3100 charging problem...	hrco	Nokia Hardware & Hardware Repair	1	12-06-2003 06:51

01-05-2007, 17:38	#2 (permalink)
capri No Life Poster Join Date: Nov 2006 Location: Philippines - Saudi Arabia Posts: 539 Member: 396326 Status: Offline Thanks Meter: 229	Flash IC still the problem mate... do it again, apply good flux to Flash IC reheat your ic not good contact @ the board.

01-05-2007, 20:28	#3 (permalink)
.:KHALIFA:. No Life Poster Join Date: May 2006 Location: U wont beleive Age: 43 Posts: 1,293 Member: 275631 Status: Offline Thanks Meter: 408	first reball cpu... if dont work than reball falsh....

01-06-2007, 02:47	#4 (permalink)
HUM No Life Poster Join Date: Jul 2005 Location: karachi Posts: 8,673 Member: 161728 Status: Offline Sonork: 100.1582708 Thanks Meter: 2,237	change flash ic,ur problem is 100% solved.

01-06-2007, 17:58	#6 (permalink)
~mr_Ten$ion~ No Life Poster Join Date: Apr 2005 Location: .... Ghari Matani ...... Age: 18 Posts: 1,954 Member: 135601 Status: Offline Sonork: 100.1612518 Thanks Meter: 68	Change Flash UIc & then Full Flash ........... No need Change UEM .... Thanz BR

01-27-2007, 09:40	#9 (permalink)
Gsm_pro Freak Poster Join Date: Jun 2006 Posts: 326 Member: 292599 Status: Offline Thanks Meter: 66	Check fia file from phoenix,if ok try erase again... Or flash IC probem..

01-27-2007, 11:37	#10 (permalink)
jaggi Freak Poster Join Date: Apr 2006 Location: Newzealand Posts: 226 Member: 258480 Status: Offline Thanks Meter: 14	reball flash ic flash with jaf if not work then change ur flash ic firt erase full flash then flash normally 100%%%%%%%%%% solved

01-27-2007, 23:31	#11 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	no all of you with very sorry no idea just flash set with Mt-box by disable vpp method and all will be 100000000000000000% ok this error remove with MT-box nicely with out any changes sorry to all of you my brothers

01-27-2007, 23:33	#12 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	in this error specialy Mt-box only help and other all failed