3110c UI setting failed - GSM-Forum

ravi mobile · 08-13-2010, 10:40

nokia 3110c flashing ok but UI setting failed

abdurrahimsagar · 08-13-2010, 10:56

try too jaf box usb i hope your problem solve

sunnyarora · 08-13-2010, 14:01

Quote:

Originally Posted by ravi mobile

nokia 3110c flashing ok but UI setting failed

first flash with 7:30 version if not ok then take backup rpl and erase or flash

**aZimBahar** · 08-13-2010, 14:19

try by mx-key . i hope your problem must be solve

M kashif · 08-13-2010, 14:34

1 use jaf
2 format user area
3 full factory

suraj9860607689 · 08-13-2010, 15:55

use 7Pin Cable.......

MIRPUR AJK · 08-13-2010, 17:13

yes dear mr suraj is right this is ur cable falt use 7pin cable ,,,,,,,,,,,,,,,,

gautamghosh · 05-20-2011, 13:56

i have a question 7 pin cable is valid for ufs? can use it with mt

rabindar · 05-20-2011, 14:27

If not success try to flash with phoniex

pradeep_gaire · 05-20-2011, 14:34

flas with atf box and see if problem is same then reball tiabo ic 100% ok

handsum2010 · 05-20-2011, 14:40

remove the set &re canect the set

gsmshankarb · 05-20-2011, 14:49

flash with 7.30v 1oooo% ok

ravi mobile · 05-20-2011, 15:02

My problem has been solve.

Thanks to all for Support and reply.

08-13-2010, 10:40	#1 (permalink)
ravi mobile Registered User Join Date: Jan 2008 Location: Where never ends. Posts: 1,978 Member: 669673 Status: Offline Thanks Meter: 301	3110c UI setting failed nokia 3110c flashing ok but UI setting failed

08-13-2010, 10:56	#2 (permalink)
abdurrahimsagar No Life Poster Join Date: Mar 2008 Location: Chittagong, Bangladesh. Age: 39 Posts: 1,196 Member: 734476 Status: Offline Sonork: 100.1604415 Thanks Meter: 2,485	try too jaf box usb i hope your problem solve

08-13-2010, 14:19	#4 (permalink)
aZimBahar Product Manager Join Date: Dec 2009 Location: CEO.of.ROMDevelopers Age: 32 Posts: 16,014 Member: 1174508 Status: Offline Sonork: 100.1593820 Thanks Meter: 11,979	try by mx-key . i hope your problem must be solve

08-13-2010, 14:34	#5 (permalink)
M kashif Freak Poster Join Date: Nov 2006 Location: Lahore pakistan Posts: 422 Member: 387116 Status: Offline Sonork: 100.1650000 Thanks Meter: 176	1 use jaf 2 format user area 3 full factory

08-13-2010, 15:55	#6 (permalink)
suraj9860607689 No Life Poster Join Date: Jun 2008 Location: Pune (Daund) Maharashtra Age: 34 Posts: 1,639 Member: 787710 Status: Offline Sonork: not using Thanks Meter: 771	use 7Pin Cable.......

08-13-2010, 17:13	#7 (permalink)
MIRPUR AJK No Life Poster Join Date: Mar 2008 Posts: 1,301 Member: 725834 Status: Offline Thanks Meter: 921	yes dear mr suraj is right this is ur cable falt use 7pin cable ,,,,,,,,,,,,,,,,

05-20-2011, 13:56	#8 (permalink)
gautamghosh Junior Member Join Date: May 2010 Posts: 12 Member: 1313317 Status: Offline Thanks Meter: 2	i have a question 7 pin cable is valid for ufs? can use it with mt

05-20-2011, 14:27	#9 (permalink)
rabindar Freak Poster Join Date: Apr 2010 Location: SILLIGURI (WEST BENGAL) Age: 38 Posts: 214 Member: 1277253 Status: Offline Sonork: 100.1617779 Thanks Meter: 33	If not success try to flash with phoniex

05-20-2011, 14:34	#10 (permalink)
pradeep_gaire Junior Member Join Date: Jan 2011 Posts: 23 Member: 1487057 Status: Offline Thanks Meter: 0	flas with atf box and see if problem is same then reball tiabo ic 100% ok

05-20-2011, 14:40	#11 (permalink)
handsum2010 Junior Member Join Date: Mar 2010 Posts: 32 Member: 1273701 Status: Offline Sonork: 31121986 Thanks Meter: 2	remove the set &re canect the set

05-20-2011, 14:49	#12 (permalink)
gsmshankarb Freak Poster Join Date: Jun 2010 Location: india(Bhuj kutch ) Age: 34 Posts: 430 Member: 1326709 Status: Offline Thanks Meter: 39	flash with 7.30v 1oooo% ok

05-20-2011, 15:02	#13 (permalink)
ravi mobile Registered User Join Date: Jan 2008 Location: Where never ends. Posts: 1,978 Member: 669673 Status: Offline Thanks Meter: 301	My problem has been solve. Thanks to all for Support and reply.