3230 white screen - GSM-Forum

gsmshare98 · 01-14-2007, 08:28

LCD and UI board is ok,i already replace the display ic then also same problem!can anybody help me!!!

Yuvi · 01-14-2007, 10:35

3230 white light solution ok

francis1986 · 01-14-2007, 12:20

is the phone booting?

gsmshare98 · 01-14-2007, 12:33

software already ok! the phone can call in and call out...

francis1986 · 01-14-2007, 12:42

hi mate take any working phone with the same display type (but the phone should be working) eg 7610, set your multimeter on 200k and check the on the display connector of the faulty 3230 on reverse bias (with red probe ground) and match it with the ok phone. The reason I'm telling u this procedure is so that u can find the fault by ur self. If the meter shows some reading then the track is connected. the most common reading u'll get is 46k Oms. Hope u'll find the fault

.

Yuvi · 01-14-2007, 14:51

sort this track problem ok

gsmshare98 · 01-14-2007, 15:26

thanks gv me the pic!but also same the problem...

gsmshare98 · 01-14-2007, 15:29

Yuvi...
i hv 7610 same problem as 3230!i already replace UPP and display ic!!!can u help me???

Yuvi · 01-14-2007, 16:04

chack your
Private Messages

ashok_kumar459 · 01-21-2007, 16:29

try to replace backside board near battery + pin near black ic........will slove ur problem

thangaraj_gk · 07-30-2007, 14:08

dear friend i had a problem with 3230 display at first the display shirinks after 10 minutes. i change the display the problem solved ,but after 2 days the display had been total white then i replaced the older display it works fine for 10 mts and get shaking after that can u help me please ??

Rajbhatitr · 07-30-2007, 14:38

DEar frnd change the display connector it will work

01-14-2007, 08:28	#1 (permalink)
gsmshare98 Freak Poster Join Date: Jan 2007 Posts: 102 Member: 429638 Status: Offline Thanks Meter: 2	3230 white screen LCD and UI board is ok,i already replace the display ic then also same problem!can anybody help me!!!

07-30-2007, 14:08	#11 (permalink)
thangaraj_gk Junior Member Join Date: Dec 2006 Posts: 18 Member: 414321 Status: Offline Thanks Meter: 1	3230 display dear friend i had a problem with 3230 display at first the display shirinks after 10 minutes. i change the display the problem solved ,but after 2 days the display had been total white then i replaced the older display it works fine for 10 mts and get shaking after that can u help me please ??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3230 White Screen Solutions?????	imran_qasim	WD2 & APE (Symbian Phones)	31	06-04-2007 13:18
3230 white screen	jagadeesh22	Nokia Hardware & Hardware Repair	9	03-29-2007 19:05
3230 White Screen & Can't Power On	ccw123	MT-BOX	6	09-02-2006 00:34
3230 white screen and Blinking lcd	skd_123	Nokia Hardware & Hardware Repair	3	07-15-2006 15:46

01-14-2007, 12:20	#3 (permalink)
francis1986 Registered User Join Date: Aug 2006 Location: Dubai U.A.E. Posts: 218 Member: 324136 Status: Offline Thanks Meter: 99	is the phone booting?

01-14-2007, 12:33	#4 (permalink)
gsmshare98 Freak Poster Join Date: Jan 2007 Posts: 102 Member: 429638 Status: Offline Thanks Meter: 2	software already ok! the phone can call in and call out...

01-14-2007, 12:42	#5 (permalink)
francis1986 Registered User Join Date: Aug 2006 Location: Dubai U.A.E. Posts: 218 Member: 324136 Status: Offline Thanks Meter: 99	hi mate take any working phone with the same display type (but the phone should be working) eg 7610, set your multimeter on 200k and check the on the display connector of the faulty 3230 on reverse bias (with red probe ground) and match it with the ok phone. The reason I'm telling u this procedure is so that u can find the fault by ur self. If the meter shows some reading then the track is connected. the most common reading u'll get is 46k Oms. Hope u'll find the fault .

01-14-2007, 15:26	#7 (permalink)
gsmshare98 Freak Poster Join Date: Jan 2007 Posts: 102 Member: 429638 Status: Offline Thanks Meter: 2	thanks gv me the pic!but also same the problem...

01-14-2007, 15:29	#8 (permalink)
gsmshare98 Freak Poster Join Date: Jan 2007 Posts: 102 Member: 429638 Status: Offline Thanks Meter: 2	Yuvi... i hv 7610 same problem as 3230!i already replace UPP and display ic!!!can u help me???

01-14-2007, 16:04	#9 (permalink)
Yuvi No Life Poster Join Date: Jan 2006 Location: jharkhand jamshedpur INDIA Age: 38 Posts: 887 Member: 226587 Status: Offline Sonork: 100.1603781 Thanks Meter: 352	chack your Private Messages

01-21-2007, 16:29	#10 (permalink)
ashok_kumar459 No Life Poster Join Date: Nov 2005 Location: TIRUPUR Posts: 552 Member: 202500 Status: Offline Thanks Meter: 234	try to replace backside board near battery + pin near black ic........will slove ur problem

07-30-2007, 14:38	#12 (permalink)
Rajbhatitr Insane Poster Join Date: May 2005 Age: 43 Posts: 92 Member: 147187 Status: Offline Thanks Meter: 15	DEar frnd change the display connector it will work