3310 and 8210 dead, but flashed OK... - GSM-Forum

CellM@n · 05-04-2002, 00:53

i Have check all of voltage measured like service manual told me... but i have no GSM Tester... what part should i Check??

kharr · 05-07-2002, 01:15

if you have flashed the phone but still it won't power on, change ccont..... it worked on me lotsa time!!! good luck....

hanoon · 05-07-2002, 07:38

i think ur MAD2 is destroyed or need to resolder....

good luck!

Jackmaxo · 05-26-2002, 04:57

Hi my friends,
plz test the phone with wintesla and post the results here.
i am waiting
Good lucccccck

CellM@n · 05-27-2002, 00:19

i cant test it with wintesla because its dead.

How can i check MAD Faulty ??

pls help

Hanukkah · 05-27-2002, 09:27

If you can flash your phone but it won't turn on, then you should change your flash ic.

Raheeeeb · 05-27-2002, 19:15

hi freinds if the phone is o.k in flashing erasing and writing it s impossible to b ccount or ram or flash ic... either the cobba excludesd .. yes now u have a limite direction ... yes it s the haggar i.c it s response of that foolowing dammaged if the phone read and write and u c the following
1- black screen and phone freez
2-balck screen and then no data ..and the freez
3-the phone read and write and dejan not not say ram bad
4-re sart after falshing and phone freez
alll these damaged from hagar i/c
thank u for all my freinds attentions

CellM@n · 05-27-2002, 23:35

im working in Changing Hagar raheeeb...

ill post result in next 2 hours

rgds

05-04-2002, 00:53	#1 (permalink)
CellM@n No Life Poster Join Date: Jan 2001 Location: Planet EARTH Age: 39 Posts: 1,151 Member: 3194 Status: Online Thanks: 11 Thanked 37 Times in 31 Posts	3310 and 8210 dead, but flashed OK... i Have check all of voltage measured like service manual told me... but i have no GSM Tester... what part should i Check??

05-07-2002, 07:38	#3 (permalink)
hanoon No Life Poster Join Date: Dec 2001 Location: USA Age: 34 Posts: 606 Member: 8051 Status: Offline Thanks: 2 Thanked 5 Times in 2 Posts	hanoon© i think ur MAD2 is destroyed or need to resolder.... good luck!

05-27-2002, 19:15	#7 (permalink)
Raheeeeb No Life Poster Join Date: Oct 2001 Location: -------- Age: 44 Posts: 1,011 Member: 7062 Status: Offline Thanks: 0 Thanked 118 Times in 37 Posts	please b informed hi freinds if the phone is o.k in flashing erasing and writing it s impossible to b ccount or ram or flash ic... either the cobba excludesd .. yes now u have a limite direction ... yes it s the haggar i.c it s response of that foolowing dammaged if the phone read and write and u c the following 1- black screen and phone freez 2-balck screen and then no data ..and the freez 3-the phone read and write and dejan not not say ram bad 4-re sart after falshing and phone freez alll these damaged from hagar i/c thank u for all my freinds attentions

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
k310i dead but flashing ok	.::ricky rayya::.	Cruiser Suite	3	02-25-2008 09:37
T630 Dead but flash ok	rajiv007	Cruiser Suite	4	05-26-2007 17:30
T610 dead but flashing ok	roberts	Sony Ericsson Hardware Repair Area	15	09-02-2006 05:00
6610 dead but flash ok	KRIZA	Nokia Hardware & Hardware-Repair Area	14	04-19-2005 21:20
T2288 dead but flashing ok	Porter	Sony Ericsson Hardware Repair Area	1	08-17-2003 11:07

05-07-2002, 01:15	#2 (permalink)
kharr Freak Poster Join Date: Apr 2002 Location: halls of the dead Age: 31 Posts: 207 Member: 11205 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	if you have flashed the phone but still it won't power on, change ccont..... it worked on me lotsa time!!! good luck....

05-26-2002, 04:57	#4 (permalink)
Jackmaxo Freak Poster Join Date: Dec 2001 Location: Earth Posts: 239 Member: 7934 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hi my friends, plz test the phone with wintesla and post the results here. i am waiting Good lucccccck

05-27-2002, 00:19	#5 (permalink)
CellM@n No Life Poster Join Date: Jan 2001 Location: Planet EARTH Age: 39 Posts: 1,151 Member: 3194 Status: Online Thanks: 11 Thanked 37 Times in 31 Posts	i cant test it with wintesla because its dead. How can i check MAD Faulty ?? pls help

05-27-2002, 09:27	#6 (permalink)
Hanukkah No Life Poster Join Date: Jul 2001 Location: RP Age: 37 Posts: 892 Member: 5246 Status: Offline Thanks: 4 Thanked 9 Times in 9 Posts	If you can flash your phone but it won't turn on, then you should change your flash ic.

05-27-2002, 23:35	#8 (permalink)
CellM@n No Life Poster Join Date: Jan 2001 Location: Planet EARTH Age: 39 Posts: 1,151 Member: 3194 Status: Online Thanks: 11 Thanked 37 Times in 31 Posts	im working in Changing Hagar raheeeb... ill post result in next 2 hours rgds