3310 contact service - GSM-Forum

moobile mafia · 10-04-2004, 20:41

hi guys
i have 3310 got contact serivce i change cooba but no result plz help

FrunzyGSM · 10-04-2004, 20:54

Try to flash your phone! every time when u chanhe cobba u must flash ur phone with full flash!

eeprom_flash · 10-04-2004, 21:18

use eeprom tools to know cos of contact service fist..././

Unggul · 10-09-2004, 20:56

change the flash IC

Best Regards
Unggul

Bohosh · 10-09-2004, 21:02

Change flash ic and flash the phone with full flash.

shawgsm · 10-10-2004, 09:27

use eprom tool to check what is the problem. if it is eprom tune check sum. flash the phone with virgen eprom. start address is 3D0000.AFTER FLASHING USE NOKTOLL to rebuild imei coz u will get ?????? imei just copy the original imei of your phone then update faid & lastly set factory reset..hope this could help
br
sherwin

moobile mafia · 10-19-2004, 10:02

i change flash ic set is dead is no w
what i do now

Bypx · 10-19-2004, 12:57

Why you have changed chip and chop? Always perform tests to know the reason of contact service!

pazeth™ · 10-19-2004, 14:24

I have same problem, 3310 contact service, and when I try to selftest, computer say cobba paralel failed, I change coba and I flash again, not success...

homecell · 10-19-2004, 15:43

if says cobba parralel failed and you changed cobba and its still the same means theres a broken track on the board you need circuitry its very difficult to repair tracks under vga's

Cat10 · 10-19-2004, 17:29

Clean much tfe pads af cobba.
COBBA Parallel replace COBBA work 100%

10-04-2004, 20:41	#1 (permalink)
moobile mafia Insane Poster Join Date: Aug 2004 Age: 43 Posts: 60 Member: 79647 Status: Offline Thanks Meter: 1	3310 contact service hi guys i have 3310 got contact serivce i change cooba but no result plz help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3310 Contact Service ( S T R A N G E ) !!	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-25-2001 18:27
3310 Contact Service (Donble blinking) not-repairable !!!	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-09-2001 06:09
3310 contact service insert sim/contact i tried ...	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-11-2001 04:38
SUCCESS in Repairing 3310 Contact Service (Double-blink) using NFREE by ViperBJK	ed2k_7	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	24	07-08-2001 16:00
3310 contact service repair?	emix	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-04-2001 21:47

10-04-2004, 20:54	#2 (permalink)
FrunzyGSM Freak Poster Join Date: Mar 2004 Age: 41 Posts: 179 Member: 56948 Status: Offline Thanks Meter: 15	Try to flash your phone! every time when u chanhe cobba u must flash ur phone with full flash!

10-04-2004, 21:18	#3 (permalink)
eeprom_flash Freak Poster Join Date: Mar 2004 Location: Neptune Age: 22 Posts: 480 Member: 58599 Status: Offline Thanks Meter: 2	use eeprom tools to know cos of contact service fist..././

10-09-2004, 20:56	#4 (permalink)
Unggul No Life Poster Join Date: Jul 2004 Location: Bandung - West Java, Indonesia Age: 43 Posts: 501 Member: 71273 Status: Offline Thanks Meter: 14	change the flash IC Best Regards Unggul

10-09-2004, 21:02	#5 (permalink)
Bohosh No Life Poster Join Date: Aug 2002 Posts: 1,948 Member: 14741 Status: Offline Thanks Meter: 119	Change flash ic and flash the phone with full flash.

10-10-2004, 09:27	#6 (permalink)
shawgsm No Life Poster Join Date: Jan 2004 Location: United States Posts: 1,988 Member: 51453 Status: Offline Thanks Meter: 729	use eprom tool to check what is the problem. if it is eprom tune check sum. flash the phone with virgen eprom. start address is 3D0000.AFTER FLASHING USE NOKTOLL to rebuild imei coz u will get ?????? imei just copy the original imei of your phone then update faid & lastly set factory reset..hope this could help br sherwin

10-19-2004, 10:02	#7 (permalink)
moobile mafia Insane Poster Join Date: Aug 2004 Age: 43 Posts: 60 Member: 79647 Status: Offline Thanks Meter: 1	i change flash ic set is dead is no w what i do now

10-19-2004, 12:57	#8 (permalink)
Bypx No Life Poster Join Date: Apr 2004 Location: Milano, Italy Age: 37 Posts: 2,170 Member: 62336 Status: Offline Thanks Meter: 115	Why you have changed chip and chop? Always perform tests to know the reason of contact service!

10-19-2004, 14:24	#9 (permalink)
pazeth™ No Life Poster Join Date: Jul 2004 Location: BANDA ACEH INDONESIA Posts: 1,268 Member: 74519 Status: Offline Thanks Meter: 79	I have same problem, 3310 contact service, and when I try to selftest, computer say cobba paralel failed, I change coba and I flash again, not success...

10-19-2004, 15:43	#10 (permalink)
homecell Junior Member Join Date: Apr 2004 Age: 38 Posts: 20 Member: 63873 Status: Offline Thanks Meter: 0	if says cobba parralel failed and you changed cobba and its still the same means theres a broken track on the board you need circuitry its very difficult to repair tracks under vga's

10-19-2004, 17:29	#11 (permalink)
Cat10 Freak Poster Join Date: Oct 2003 Location: Italy Age: 45 Posts: 220 Member: 42123 Status: Offline Thanks Meter: 2	Clean much tfe pads af cobba. COBBA Parallel replace COBBA work 100%