3310 New Problem - GSM-Forum

sarojrkl · 02-02-2007, 05:09

If the keypad is locked, when incoming call comes call can not be received. I receives the call b manually unlocking the key pad.Any have solution plz.?
THANKS,

Allunlockingsource · 02-02-2007, 05:40

plz factory setting mobile maybe your problem is slove

sonuveene · 02-02-2007, 06:48

Quote:

Originally Posted by sarojrkl

If the keypad is locked, when incoming call comes call can not be received. I receives the call b manually unlocking the key pad.Any have solution plz.?
THANKS,

hi bro,
first restore factory setting 99 % problem solev if problem is still then ui setting with ufs.

sorry for bed english.

sarojrkl · 02-03-2007, 09:04

Both solution suggested above has been applied but the problem is same.

capri · 02-03-2007, 09:27

Quote:

Originally Posted by sarojrkl

If the keypad is locked, when incoming call comes call can not be received. I receives the call b manually unlocking the key pad.Any have solution plz.?
THANKS,

CPU PROBLEM

Replace the board 100%

Vijendra Saini · 02-03-2007, 13:35

Big problem dear that the problem of CPU.

sarojrkl · 02-03-2007, 16:13

Quote:

Originally Posted by capri

CPU PROBLEM

Replace the board 100%

Great solution thanks Ha Ha Ha.....................

irfaN_vu · 02-03-2007, 21:13

u must erase flash first with ufs then flash with last ver. mcu+ppm+pmm+rebuild imei+all UI setting.... best of luck...

asif123 · 02-04-2007, 17:24

clean keypad and some heat uem and pa antswch then enjoy azad kashmir mirpur 19

.:KHALIFA:. · 02-04-2007, 18:21

just flash the fon with geoflash.... all b fine... 100000%

Prajith · 02-04-2007, 20:32

Quote:

Originally Posted by sarojrkl

If the keypad is locked, when incoming call comes call can not be received. I receives the call b manually unlocking the key pad.Any have solution plz.?
THANKS,

Rework Flash Ic and Flash full and make UI Options( Tornado or other like software)

If the result is same try flash with Dct 3 flasher software (eg:knok ) with a good file that are copied from another phone.Make Imei and do eeprom.

It will work

Prajith

[email protected]

pdapower · 02-04-2007, 21:07

Quote:

Originally Posted by asif123

clean keypad and some heat uem and pa antswch then enjoy azad kashmir mirpur 19

asif r u ok .......where did u got uem ic in 3310 phones

cdmababa · 02-04-2007, 21:49

Full Flash Phone With Difrent Ver
Problem Slove 100%

asif123 · 02-05-2007, 17:41

chek contnutey all butten and chack all buten bbel if dameg then replac and caek two diod near uem ........then enjoy azad kashmir mirpur 19

.:KHALIFA:. · 02-05-2007, 19:42

Quote:

Originally Posted by asif123

chek contnutey all butten and chack all buten bbel if dameg then replac and caek two diod near uem ........then enjoy azad kashmir mirpur 19

man where the hell is UEM in 3310....

read thread carefully before post

02-02-2007, 05:09	#1 (permalink)
sarojrkl No Life Poster Join Date: Dec 2006 Posts: 571 Member: 403881 Status: Offline Thanks Meter: 80	3310 New Problem If the keypad is locked, when incoming call comes call can not be received. I receives the call b manually unlocking the key pad.Any have solution plz.? THANKS,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3310 display new problem!!!!!!!	gsm-lord	Nokia Hardware & Hardware Repair	6	01-09-2009 10:24
3310 new set net problem pls help???	proxy_gsm	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-22-2003 09:41
3310 new problem!!!!	Mehvishal	Nokia Hardware & Hardware Repair	3	08-16-2003 09:27
Dejan Not Calc Faid For 3310 New Version's ( 5.11 )	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	03-26-2002 01:11
NEW Problem of 3310!!!!!!	Mehvishal	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	03-05-2002 05:51

02-02-2007, 05:40	#2 (permalink)
Allunlockingsource No Life Poster Join Date: Aug 2006 Location: SPAIN-----UK Posts: 2,037 Member: 333439 Status: Offline Sonork: 100.1589101 Thanks Meter: 623	plz factory setting mobile maybe your problem is slove

02-03-2007, 09:04	#4 (permalink)
sarojrkl No Life Poster Join Date: Dec 2006 Posts: 571 Member: 403881 Status: Offline Thanks Meter: 80	Both solution suggested above has been applied but the problem is same.

02-03-2007, 13:35	#6 (permalink)
Vijendra Saini No Life Poster Join Date: Nov 2006 Location: Back after long time :-) Age: 40 Posts: 4,397 Member: 398557 Status: Offline Sonork: 100.1578489 Thanks Meter: 1,516	Big problem dear that the problem of CPU.

02-03-2007, 21:13	#8 (permalink)
irfaN_vu No Life Poster Join Date: Mar 2005 Location: United Arab Emirates Age: 43 Posts: 1,335 Member: 130244 Status: Offline Sonork: 100.1609062 Thanks Meter: 143	u must erase flash first with ufs then flash with last ver. mcu+ppm+pmm+rebuild imei+all UI setting.... best of luck...

02-04-2007, 17:24	#9 (permalink)
asif123 Freak Poster Join Date: May 2006 Posts: 132 Member: 285377 Status: Offline Thanks Meter: 7	clean keypad and some heat uem and pa antswch then enjoy azad kashmir mirpur 19

02-04-2007, 18:21	#10 (permalink)
.:KHALIFA:. No Life Poster Join Date: May 2006 Location: U wont beleive Age: 43 Posts: 1,293 Member: 275631 Status: Offline Thanks Meter: 408	just flash the fon with geoflash.... all b fine... 100000%

02-04-2007, 21:49	#13 (permalink)
cdmababa Freak Poster Join Date: Mar 2006 Location: MobileCorner™ Posts: 204 Member: 245169 Status: Offline Sonork: 100.1652602:baba Thanks Meter: 36	Full Flash Phone With Difrent Ver Problem Slove 100%

02-05-2007, 17:41	#14 (permalink)
asif123 Freak Poster Join Date: May 2006 Posts: 132 Member: 285377 Status: Offline Thanks Meter: 7	chek contnutey all butten and chack all buten bbel if dameg then replac and caek two diod near uem ........then enjoy azad kashmir mirpur 19