3310 no ring tones - GSM-Forum

wildwhacker · 09-19-2001, 21:32

hi guys i have a 3310 v4.24 with no ring tone sound. the phone was dropped in water. i used a water replent on the unit and everything works fine apart from ringtone sound. i have replaced the ringer but still no joy, i have also checked and thouroghly cleaned the contacts. please help.<br />many thanks. [email protected] <img src="rolleyes.gif" border="0">

d2cards · 09-20-2001, 01:08

Check User Interface IC.

ARC · 09-20-2001, 11:31

I have 100% solution .....<br />Contact me if u want it! <img src="wink.gif" border="0">

pornopig · 09-20-2001, 18:11

Hi!<br /><a href="http://www.gsmcity.de/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=45&t=000226&counter hit=yes" target="_blank">http://www.gsmcity.de/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=45&t=000226&counter hit=yes</a>

good luck...

Hanukkah · 09-25-2001, 22:23

Make jumper from pin 6 (6 pins from the bottom right side) of the UI Ic and connect to lower buzzer pad. Method works 100% for me. Try it!

09-19-2001, 21:32	#1 (permalink)
wildwhacker Freak Poster Join Date: Feb 2001 Location: england Posts: 444 Member: 3348 Status: Offline Thanks Meter: 3	3310 no ring tones hi guys i have a 3310 v4.24 with no ring tone sound. the phone was dropped in water. i used a water replent on the unit and everything works fine apart from ringtone sound. i have replaced the ringer but still no joy, i have also checked and thouroghly cleaned the contacts. please help.<br />many thanks. [email protected] <img src="rolleyes.gif" border="0">

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 3310 (No ringing tone No vibration)	Ismaila	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	9	08-05-2005 23:20
6100 no ring tone even message tone	loyd	Nokia Hardware & Hardware Repair	6	04-07-2004 18:34
8310 no ring tone no vibrator	digitalmk	Nokia Hardware & Hardware Repair	2	12-06-2003 15:18
3310 no ring tone	hmnaga	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	08-20-2003 13:13
3310 no ringing and message tone	eureka8888	Nokia Hardware & Hardware Repair	4	08-22-2001 11:58

09-20-2001, 01:08	#2 (permalink)
d2cards Insane Poster Join Date: Apr 2001 Location: Yugoslavia Posts: 74 Member: 4206 Status: Offline Thanks Meter: 2	Check User Interface IC.

09-20-2001, 11:31	#3 (permalink)
ARC No Life Poster Join Date: Jun 2001 Location: UAE Age: 43 Posts: 1,419 Member: 5019 Status: Offline Sonork: 100.110196 Thanks Meter: 69	I have 100% solution .....<br />Contact me if u want it! <img src="wink.gif" border="0">

09-20-2001, 18:11	#4 (permalink)
pornopig Freak Poster Join Date: Aug 2001 Location: Tha Home of DirkDiggler Posts: 120 Member: 5908 Status: Offline Thanks Meter: 1	Hi!<br /><a href="http://www.gsmcity.de/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=45&t=000226&counter hit=yes" target="_blank">http://www.gsmcity.de/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=45&t=000226&counter hit=yes</a> good luck...

09-25-2001, 22:23	#5 (permalink)
Hanukkah No Life Poster Join Date: Jul 2001 Location: RP Age: 48 Posts: 890 Member: 5246 Status: Offline Thanks Meter: 9	Make jumper from pin 6 (6 pins from the bottom right side) of the UI Ic and connect to lower buzzer pad. Method works 100% for me. Try it!