3650 dead (water damage) - GSM-Forum

inti_cell · 08-11-2008, 06:39

please help me...i have nokia 3650 dead because water..
check with power supply display show 50 mA and imediatelly go 0 mA.
i try flashing with UFS, flashing OK but can't finishing..(full factory,software upgrade,init sim,etc..failed)..

gsmshare · 08-11-2008, 06:46

u clean first board then rehot uem,,,if still same you need to again try upp...

post me result,,
i wait for you

inti_cell · 08-11-2008, 11:28

i'm was try to reheating UEM, SDRAM, UPP but problem still..

westgold · 08-11-2008, 11:42

try to check shorted ICs or lines

lordchan · 08-11-2008, 11:45

Try to reheat or replace sdram..

m_variyava · 08-11-2008, 14:10

re heat uem and than if still same problem plz rebold uem

08-11-2008, 06:39	#1 (permalink)
inti_cell Crazy Poster Join Date: Feb 2008 Posts: 58 Member: 712168 Status: Offline Thanks Meter: 3	3650 dead (water damage) please help me...i have nokia 3650 dead because water.. check with power supply display show 50 mA and imediatelly go 0 mA. i try flashing with UFS, flashing OK but can't finishing..(full factory,software upgrade,init sim,etc..failed)..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N73 help (power on flash from water damage)	nemetron11	Nokia Hardware & Hardware Repair	2	10-08-2007 03:07
s400i water damage) washing machine	stolen4u	Samsung Hardware Repair	0	04-27-2007 15:53
KG 110 Dead (Water damage)	amol_sm	LG	4	04-16-2007 00:38
nokia 3650 dead and not dead	tsarkh	Nokia Hardware & Hardware Repair	4	03-17-2006 03:49
3650 dead after water damage need solution	Edocomsel	WD2 & APE (Symbian Phones)	0	01-25-2006 02:25

08-11-2008, 06:46	#2 (permalink)
gsmshare No Life Poster Join Date: Jan 2007 Location: malaysia Posts: 1,801 Member: 429569 Status: Offline Thanks Meter: 1,543	u clean first board then rehot uem,,,if still same you need to again try upp... post me result,, i wait for you

08-11-2008, 11:28	#3 (permalink)
inti_cell Crazy Poster Join Date: Feb 2008 Posts: 58 Member: 712168 Status: Offline Thanks Meter: 3	i'm was try to reheating UEM, SDRAM, UPP but problem still..

08-11-2008, 11:42	#4 (permalink)
westgold No Life Poster Join Date: Mar 2008 Location: west coast PH Posts: 523 Member: 734668 Status: Offline Thanks Meter: 83	try to check shorted ICs or lines

08-11-2008, 11:45	#5 (permalink)
lordchan Freak Poster Join Date: Sep 2007 Location: http://lordchan.blogspot.com/ Posts: 264 Member: 588339 Status: Offline Thanks Meter: 76	Try to reheat or replace sdram..

08-11-2008, 14:10	#6 (permalink)
m_variyava Junior Member Join Date: Aug 2008 Posts: 13 Member: 835157 Status: Offline Sonork: 52385 Thanks Meter: 0	re heat uem and than if still same problem plz rebold uem