3650 lcd fades and blink - GSM-Forum

GSM_BLUE · 10-09-2006, 11:38

i replace the lcd driver not once i think 6 times but nothing changes.......... i track, i also change the lcd port, and i thought that the problem is coming from the upp............... then i reheated the upp,....... then the problem become bigger, it doesnt display anymore............ but when i flash it in my jaf box it display nokia in local mode........... but when i powered on w/ battery the lcd are blinking only........................

i want to hear some good solution out there dude!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

thanks!!!!!!!!!!!!!!!!!!! wbr

mixa55 · 10-09-2006, 13:00

Blink 1 time only and off or blinking ???

GSM_BLUE · 10-10-2006, 04:10

Quote:

Originally Posted by mixa55

Blink 1 time only and off or blinking ???

its only blinking when i turn it on with the bat......
but when i power it on with my ufs box it display insert sim........... what do you think................. i will appreciate any hints about this............ tnx!

wbr

manyosa · 10-14-2006, 12:43

Quote:

Originally Posted by GSM_BLUE

i replace the lcd driver not once i think 6 times but nothing changes.......... i track, i also change the lcd port, and i thought that the problem is coming from the upp............... then i reheated the upp,....... then the problem become bigger, it doesnt display anymore............ but when i flash it in my jaf box it display nokia in local mode........... but when i powered on w/ battery the lcd are blinking only........................

i want to hear some good solution out there dude!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

thanks!!!!!!!!!!!!!!!!!!! wbr

Try to reheat the uem and ppm with flux and reply

small_world · 10-14-2006, 14:29

in that kind of problem, my solution always is software solution, erase flash by ufs, or flash with erase_flash0_flash1_flash2.fia after that full flash, format user area..upload pm file and unlock. restore factory settings..i use ufs and universal..

regards

GSM_BLUE · 10-15-2006, 04:34

Quote:

Originally Posted by manyosa

Try to reheat the uem and ppm with flux and reply

still no joy dude

its the same fault..................

brogitz · 10-15-2006, 04:38

try to heat the power controller beside battery terminal and the l.c.d ic..beside l.c.d connector

GSM_BLUE · 10-15-2006, 05:28

Quote:

Originally Posted by brogitz

try to heat the power controller beside battery terminal and the l.c.d ic..beside l.c.d connector

i already done that dude....... as you read my 1st post...... anyway tnx.... im still waiting for some good solution............ tnx in advance......................

10-09-2006, 11:38	#1 (permalink)
GSM_BLUE No Life Poster Join Date: Sep 2006 Age: 41 Posts: 857 Member: 356202 Status: Offline Thanks Meter: 46	3650 lcd fades and blink i replace the lcd driver not once i think 6 times but nothing changes.......... i track, i also change the lcd port, and i thought that the problem is coming from the upp............... then i reheated the upp,....... then the problem become bigger, it doesnt display anymore............ but when i flash it in my jaf box it display nokia in local mode........... but when i powered on w/ battery the lcd are blinking only........................ i want to hear some good solution out there dude!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! thanks!!!!!!!!!!!!!!!!!!! wbr

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 3650 screen fades away	AARONIE	Twisterflasher	3	10-27-2004 12:38
3650 Show Nokia And Fade Help	snoopycellular	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	02-18-2004 13:49
Alternate Griffin manual updated! Now with 3650 solution for freeze and blink at logo	FractalizeR	Griffin	9	02-12-2004 02:41
3210 LCD fadeing	masterID	Nokia Hardware & Hardware Repair	5	11-20-2001 13:39
MOT Startac 130 - LCD Fading away...	D-Brain	Hardware Repair by brands	2	11-16-2001 09:46

10-09-2006, 13:00	#2 (permalink)
mixa55 Junior Member Join Date: May 2006 Posts: 3 Member: 285417 Status: Offline Thanks Meter: 0	Blink 1 time only and off or blinking ???

10-14-2006, 14:29	#5 (permalink)
small_world Junior Member Join Date: Sep 2004 Age: 48 Posts: 21 Member: 81843 Status: Offline Thanks Meter: 3	in that kind of problem, my solution always is software solution, erase flash by ufs, or flash with erase_flash0_flash1_flash2.fia after that full flash, format user area..upload pm file and unlock. restore factory settings..i use ufs and universal.. regards

10-15-2006, 04:38	#7 (permalink)
brogitz Junior Member Join Date: Apr 2006 Posts: 14 Member: 254383 Status: Offline Thanks Meter: 0	try to heat the power controller beside battery terminal and the l.c.d ic..beside l.c.d connector