..::5030 contact service need ur expertise::.. - GSM-Forum

HUM · 06-11-2011, 23:42

nokia 5030

problem : contact service

action taken:

first clean pcb but still same

second full flash,unlock,write pm,repair simlock but still same

third change upp from working set but still same

fourth change flash ic but still same

here is logs:

here is bus chk:

Boot Check, Please wait...
MCUID Response
-------------------------------------
MessageID : 92
msbUPP_ID : 22
lsbUPP_ID : 93
-------------------------------------
Boot OK

Boot File: C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_2nd.fia
DataLen : 000009D8
Secondary Loader Sent...
Boot OK!
MCU_CONFIGURATION_RESPONSE_DCT4_MUL3
DCT4 Mess 9F MUL3 Mess 9F
TransMode : 03
NumFlash : 02
DevAddr0 : 01
ManuId0 : 0020 - ST
DevId0 : 88C0 - Type not in database
ExtId0 : 0000
RevId0 : 7321
SectorSize0: 10
Reserved0 : 00
DevAddr1 : 02
ManuId1 : 0000 - Flash
DevId1 : 0001 - not used
ExtId1 : 0000
RevId1 : 0000
SectorSize1: 00
Reserved1 : 00
ExtBUSC : AD 7E B6 1A 23 10 03 40 C6 05 E4 01 20 A2 65 14
CheckSum : 8E
ReceiveConfigurationResponse_DCT4 - FLS1_NO_ERROR
SearchForBootstrap_DCT4 : No Error
Algo Match File : C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_st_i.fia
ALGO SENT..
Perform AUTHENTICATION..
MSID: 84980D34B82CBF0DD0BFA02940
DecodedMSID: 84CDF1BAEF00490DD1AA00024D
EncodedFAID: 3065A3DD3A5EB2E199BED8CC
Authentication : SUCCESSFULL
BB_RESTART : 07 FF
MCURestart : SUCCESS
Done!

here is flashing logs:

ImageFile:C:\Program Files\Nokia\Phoenix\Products\rm-524\rm524_005.010
PhoneType : DCT4
Algorithm : DCT4 ALGORITHM
Supported Hardwares :
> 2293
Secondary Sending Speed : 100000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 51000Hz
Number of Blocks : 153
Entry Point: 0x00DF
Is128k: True
Boot Check, Please wait...
MCUID Response
-------------------------------------
MessageID : 92
msbUPP_ID : 22
lsbUPP_ID : 93
-------------------------------------
Boot OK

Boot File: C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_2nd.fia
DataLen : 000009D8
Secondary Loader Sent...
Boot OK!
MCU_CONFIGURATION_RESPONSE_DCT4_MUL3
DCT4 Mess 9F MUL3 Mess 9F
TransMode : 03
NumFlash : 02
DevAddr0 : 01
ManuId0 : 0020 - ST
DevId0 : 88C0 - Type not in database
ExtId0 : 0000
RevId0 : 7321
SectorSize0: 10
Reserved0 : 00
DevAddr1 : 02
ManuId1 : 0000 - Flash
DevId1 : 0001 - not used
ExtId1 : 0000
RevId1 : 0000
SectorSize1: 00
Reserved1 : 00
ExtBUSC : AD 7E B6 1A 23 10 03 40 C6 05 E4 01 20 A2 65 14
CheckSum : 8E
ReceiveConfigurationResponse_DCT4 - FLS1_NO_ERROR
SearchForBootstrap_DCT4 : No Error
Algo Match File : C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_st_i.fia
ALGO SENT..
Perform AUTHENTICATION..
MSID: 8497FA67C031BC9BAB614F2233
DecodedMSID: 843E4EBAE900490DD1A8000000
EncodedFAID: 34203E036EFE26761FBF60D5
Authentication : SUCCESSFULL
Erasing address:
>> 01000000 : 0100FFFF
BB_PROGRAMMING_STATUS_REQUEST : 04 FF
ProgrammingStatus_DCT4 : No Error - 0 (0x00)

>> 01010000 : 0179FFFF
BB_PROGRAMMING_STATUS_REQUEST : 04 FF
ProgrammingStatus_DCT4 : No Error - 0 (0x00)

>> 017A0000 : 017EFFFF
BB_PROGRAMMING_STATUS_REQUEST : 04 FF
ProgrammingStatus_DCT4 : No Error - 0 (0x00)

>> 01F00000 : 01FDFFFF
BB_PROGRAMMING_STATUS_REQUEST : 04 FF
ProgrammingStatus_DCT4 : No Error - 0 (0x00)

Erasing Done
Flashing ImageFile
ContinueFlash_DCT4 Complete
Write Time Elapse : 00:00:18
FLASH Mode Set to : PHONEMODE_FLASHBUS
ProgrammingStatus_DCT4
BB_PROGRAMMING_STATUS_REQUEST : 04 FF -- Progamming status
First Byte OK
Second Byte OK
BB_PERM_DATA_RESTORE_REQ : 18 FF
BB_RESTART : 07 FF
MCURestart : SUCCESS
Making delay between files for 6000ms
ImageFile:C:\Program Files\Nokia\Phoenix\Products\rm-524\rm524_005.01ej
PhoneType : DCT4
Algorithm : DCT4 ALGORITHM
Supported Hardwares :
> 2293
Secondary Sending Speed : 100000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 51000Hz
Number of Blocks : 168
Entry Point: 0x00D2
Is128k: True
Boot Check, Please wait...
MCUID Response
-------------------------------------
MessageID : 92
msbUPP_ID : 22
lsbUPP_ID : 93
-------------------------------------
Boot OK

Boot File: C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_2nd.fia
DataLen : 000009D8
Secondary Loader Sent...
Boot OK!
MCU_CONFIGURATION_RESPONSE_DCT4_MUL3
DCT4 Mess 9F MUL3 Mess 9F
TransMode : 03
NumFlash : 02
DevAddr0 : 01
ManuId0 : 0020 - ST
DevId0 : 88C0 - Type not in database
ExtId0 : 0000
RevId0 : 7321
SectorSize0: 10
Reserved0 : 00
DevAddr1 : 02
ManuId1 : 0000 - Flash
DevId1 : 0001 - not used
ExtId1 : 0000
RevId1 : 0000
SectorSize1: 00
Reserved1 : 00
ExtBUSC : AD 7E B6 1A 23 10 03 40 C6 05 E4 01 20 A2 65 14
CheckSum : 8E
ReceiveConfigurationResponse_DCT4 - FLS1_NO_ERROR
SearchForBootstrap_DCT4 : No Error
Algo Match File : C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_st_i.fia
ALGO SENT..
Perform AUTHENTICATION..
MSID: 84111C156115020EABD2B4EF20
DecodedMSID: 843E4EBAE900490DD1A9000000
EncodedFAID: 5E8E9FB51D1637A3E4F98646
Authentication : SUCCESSFULL
Erasing address:
>> 01250000 : 0125FFFF
BB_PROGRAMMING_STATUS_REQUEST : 04 FF
ProgrammingStatus_DCT4 : No Error - 0 (0x00)

>> 01260000 : 0174FFFF
BB_PROGRAMMING_STATUS_REQUEST : 04 FF
ProgrammingStatus_DCT4 : No Error - 0 (0x00)

Erasing Done
Flashing ImageFile
ContinueFlash_DCT4 Complete
Write Time Elapse : 00:00:19
FLASH Mode Set to : PHONEMODE_FLASHBUS
ProgrammingStatus_DCT4
BB_PROGRAMMING_STATUS_REQUEST : 04 FF -- Progamming status
First Byte OK
Second Byte OK
BB_PERM_DATA_RESTORE_REQ : 18 FF
BB_RESTART : 07 FF
MCURestart : SUCCESS
Making delay between files for 6000ms
ImageFile:C:\Program Files\Nokia\Phoenix\Products\rm-524\rm5240_nai05.01ej
PhoneType : DCT4
Algorithm : DCT4 ALGORITHM
Supported Hardwares :
> 2293
Secondary Sending Speed : 100000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 51000Hz
Number of Blocks : 11
Entry Point: 0x00CA
Is128k: True
Boot Check, Please wait...
MCUID Response
-------------------------------------
MessageID : 92
msbUPP_ID : 22
lsbUPP_ID : 93
-------------------------------------
Boot OK

Boot File: C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_2nd.fia
DataLen : 000009D8
Secondary Loader Sent...
Boot OK!
MCU_CONFIGURATION_RESPONSE_DCT4_MUL3
DCT4 Mess 9F MUL3 Mess 9F
TransMode : 03
NumFlash : 02
DevAddr0 : 01
ManuId0 : 0020 - ST
DevId0 : 88C0 - Type not in database
ExtId0 : 0000
RevId0 : 7321
SectorSize0: 10
Reserved0 : 00
DevAddr1 : 02
ManuId1 : 0000 - Flash
DevId1 : 0001 - not used
ExtId1 : 0000
RevId1 : 0000
SectorSize1: 00
Reserved1 : 00
ExtBUSC : AD 7E B6 1A 23 10 03 40 C6 05 E4 01 20 A2 65 14
CheckSum : 8E
ReceiveConfigurationResponse_DCT4 - FLS1_NO_ERROR
SearchForBootstrap_DCT4 : No Error
Algo Match File : C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_st_i.fia
ALGO SENT..
Perform AUTHENTICATION..
MSID: 8497FA67C031BC9BAB614F2233
DecodedMSID: 843E4EBAE900490DD1A8000000
EncodedFAID: 34203E036EFE26761FBF60D5
Authentication : SUCCESSFULL
Erasing address:
>> 01750000 : 0178FFFF
BB_PROGRAMMING_STATUS_REQUEST : 04 FF
ProgrammingStatus_DCT4 : No Error - 0 (0x00)

Erasing Done
Flashing ImageFile
ContinueFlash_DCT4 Complete
Write Time Elapse : 00:00:01
FLASH Mode Set to : PHONEMODE_FLASHBUS
ProgrammingStatus_DCT4
BB_PROGRAMMING_STATUS_REQUEST : 04 FF -- Progamming status
First Byte OK
Second Byte OK
BB_PERM_DATA_RESTORE_REQ : 18 FF
BB_RESTART : 07 FF
MCURestart : SUCCESS
Time Elapse : 00:04:09

Waiting For Phone to go Online...

5, 4, 3, 2, 1...
MCU: V 05.01 23-09-09 RM-524 (c) Nokia
IMEI: 356274040507452
Product Serial Number: 701A711AI
Product Code : 0578242
Module Code : 0204611
Basic Production Code: 0592600
MCU SW Version : V 05.01 23-09-09 RM-524 (c) Nokia EJ
ADSP Version : p V 05.01\n23-09-09\nRM-524\n(c) NMP\nej
PPM Version : V 05.01 23-09-09 RM-524 (c) Nokia
HW Version : 2006
UEM Version : 1328
UPP Version : 8851
RFIC Version : 0700
DSP Version : ICPR81_09w17_U
LCD Version : SDI:BOHAIv92 NT39121
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000030002
Asic : 11
Provider : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_SIMLOCK_TEST : PASSED
ST_LCD_TEST : PASSED
SECURITY_CODE : ÿ
MASTER_CODE : 7712443743
PHONE_MODE : TEST MODE

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

mxkey logs:

MXKEY Serial: [FT SCR2000 0] - C0805720
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 3.1.5.0 , NTMP ver: 2.4.16.0
Module ver: 1.0.0.17309(31-05-2011), Library ver: 1.0.0.10695(31-05-2011)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 88C0 [ST M58MWR064FU,64 Mbits] page size: 64 K type: NOR area: 01000000-017FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00490DD1

A3BDA66
ASIC type: 11
UEM Imei: 35627404050745
Flash Imei: 35627404050745
MasterCode: 0676151262
RPL saved to "C:\mobileEx\3.5\data\backup\35627404050745_BA CK.r pl"

Phone Type: RM-524
SW Version: V 05.01 23-09-09 RM-524 (c) Nokia
Imei plain: 35627404050745-2
Product Code: 0578242
Cellular System: GSM
ASIC ID: 0x2293, type: 0
Ppm Id: EJ
Language Pack:
English,Russian,Ukrainian

Failed to read SP data

ripon12 · 06-12-2011, 14:48

bro try with universal box

AFZAL ABBASI · 06-12-2011, 15:00

change lcd may be u r problem solved......

madni shah · 06-12-2011, 15:48

UEM changed,upp changed but problem still,no solution

http://forum.gsmhosting.com/vbb/f550...-help-1254527/

shakeel0836 · 06-12-2011, 16:34

Quote:

Originally Posted by AFZAL ABBASI

change lcd may be u r problem solved......

i agree with you i solved this problem with replacing lcd

sachin kumar sh · 08-12-2011, 22:57

my bro change the UEM write the rpl with the help of MX-key write the pm after that unlocking the sim lock only MX-key

st.nic · 08-13-2011, 00:53

try to remove sim card BGA i fixed this problem twice in 5030.

06-11-2011, 23:42	#1 (permalink)
HUM No Life Poster Join Date: Jul 2005 Location: karachi Posts: 8,673 Member: 161728 Status: Offline Sonork: 100.1582708 Thanks Meter: 2,237	..::5030 contact service need ur expertise::.. nokia 5030 problem : contact service action taken: first clean pcb but still same second full flash,unlock,write pm,repair simlock but still same third change upp from working set but still same fourth change flash ic but still same here is logs: here is bus chk: Boot Check, Please wait... MCUID Response ------------------------------------- MessageID : 92 msbUPP_ID : 22 lsbUPP_ID : 93 ------------------------------------- Boot OK Boot File: C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_2nd.fia DataLen : 000009D8 Secondary Loader Sent... Boot OK! MCU_CONFIGURATION_RESPONSE_DCT4_MUL3 DCT4 Mess 9F MUL3 Mess 9F TransMode : 03 NumFlash : 02 DevAddr0 : 01 ManuId0 : 0020 - ST DevId0 : 88C0 - Type not in database ExtId0 : 0000 RevId0 : 7321 SectorSize0: 10 Reserved0 : 00 DevAddr1 : 02 ManuId1 : 0000 - Flash DevId1 : 0001 - not used ExtId1 : 0000 RevId1 : 0000 SectorSize1: 00 Reserved1 : 00 ExtBUSC : AD 7E B6 1A 23 10 03 40 C6 05 E4 01 20 A2 65 14 CheckSum : 8E ReceiveConfigurationResponse_DCT4 - FLS1_NO_ERROR SearchForBootstrap_DCT4 : No Error Algo Match File : C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_st_i.fia ALGO SENT.. Perform AUTHENTICATION.. MSID: 84980D34B82CBF0DD0BFA02940 DecodedMSID: 84CDF1BAEF00490DD1AA00024D EncodedFAID: 3065A3DD3A5EB2E199BED8CC Authentication : SUCCESSFULL BB_RESTART : 07 FF MCURestart : SUCCESS Done! here is flashing logs: ImageFile:C:\Program Files\Nokia\Phoenix\Products\rm-524\rm524_005.010 PhoneType : DCT4 Algorithm : DCT4 ALGORITHM Supported Hardwares : > 2293 Secondary Sending Speed : 100000Hz Algorithm Sending Speed : 6500000Hz Program Sending Speed : 6500000Hz Message Reading Speed : 51000Hz Number of Blocks : 153 Entry Point: 0x00DF Is128k: True Boot Check, Please wait... MCUID Response ------------------------------------- MessageID : 92 msbUPP_ID : 22 lsbUPP_ID : 93 ------------------------------------- Boot OK Boot File: C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_2nd.fia DataLen : 000009D8 Secondary Loader Sent... Boot OK! MCU_CONFIGURATION_RESPONSE_DCT4_MUL3 DCT4 Mess 9F MUL3 Mess 9F TransMode : 03 NumFlash : 02 DevAddr0 : 01 ManuId0 : 0020 - ST DevId0 : 88C0 - Type not in database ExtId0 : 0000 RevId0 : 7321 SectorSize0: 10 Reserved0 : 00 DevAddr1 : 02 ManuId1 : 0000 - Flash DevId1 : 0001 - not used ExtId1 : 0000 RevId1 : 0000 SectorSize1: 00 Reserved1 : 00 ExtBUSC : AD 7E B6 1A 23 10 03 40 C6 05 E4 01 20 A2 65 14 CheckSum : 8E ReceiveConfigurationResponse_DCT4 - FLS1_NO_ERROR SearchForBootstrap_DCT4 : No Error Algo Match File : C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_st_i.fia ALGO SENT.. Perform AUTHENTICATION.. MSID: 8497FA67C031BC9BAB614F2233 DecodedMSID: 843E4EBAE900490DD1A8000000 EncodedFAID: 34203E036EFE26761FBF60D5 Authentication : SUCCESSFULL Erasing address: >> 01000000 : 0100FFFF BB_PROGRAMMING_STATUS_REQUEST : 04 FF ProgrammingStatus_DCT4 : No Error - 0 (0x00) >> 01010000 : 0179FFFF BB_PROGRAMMING_STATUS_REQUEST : 04 FF ProgrammingStatus_DCT4 : No Error - 0 (0x00) >> 017A0000 : 017EFFFF BB_PROGRAMMING_STATUS_REQUEST : 04 FF ProgrammingStatus_DCT4 : No Error - 0 (0x00) >> 01F00000 : 01FDFFFF BB_PROGRAMMING_STATUS_REQUEST : 04 FF ProgrammingStatus_DCT4 : No Error - 0 (0x00) Erasing Done Flashing ImageFile ContinueFlash_DCT4 Complete Write Time Elapse : 00:00:18 FLASH Mode Set to : PHONEMODE_FLASHBUS ProgrammingStatus_DCT4 BB_PROGRAMMING_STATUS_REQUEST : 04 FF -- Progamming status First Byte OK Second Byte OK BB_PERM_DATA_RESTORE_REQ : 18 FF BB_RESTART : 07 FF MCURestart : SUCCESS Making delay between files for 6000ms ImageFile:C:\Program Files\Nokia\Phoenix\Products\rm-524\rm524_005.01ej PhoneType : DCT4 Algorithm : DCT4 ALGORITHM Supported Hardwares : > 2293 Secondary Sending Speed : 100000Hz Algorithm Sending Speed : 6500000Hz Program Sending Speed : 6500000Hz Message Reading Speed : 51000Hz Number of Blocks : 168 Entry Point: 0x00D2 Is128k: True Boot Check, Please wait... MCUID Response ------------------------------------- MessageID : 92 msbUPP_ID : 22 lsbUPP_ID : 93 ------------------------------------- Boot OK Boot File: C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_2nd.fia DataLen : 000009D8 Secondary Loader Sent... Boot OK! MCU_CONFIGURATION_RESPONSE_DCT4_MUL3 DCT4 Mess 9F MUL3 Mess 9F TransMode : 03 NumFlash : 02 DevAddr0 : 01 ManuId0 : 0020 - ST DevId0 : 88C0 - Type not in database ExtId0 : 0000 RevId0 : 7321 SectorSize0: 10 Reserved0 : 00 DevAddr1 : 02 ManuId1 : 0000 - Flash DevId1 : 0001 - not used ExtId1 : 0000 RevId1 : 0000 SectorSize1: 00 Reserved1 : 00 ExtBUSC : AD 7E B6 1A 23 10 03 40 C6 05 E4 01 20 A2 65 14 CheckSum : 8E ReceiveConfigurationResponse_DCT4 - FLS1_NO_ERROR SearchForBootstrap_DCT4 : No Error Algo Match File : C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_st_i.fia ALGO SENT.. Perform AUTHENTICATION.. MSID: 84111C156115020EABD2B4EF20 DecodedMSID: 843E4EBAE900490DD1A9000000 EncodedFAID: 5E8E9FB51D1637A3E4F98646 Authentication : SUCCESSFULL Erasing address: >> 01250000 : 0125FFFF BB_PROGRAMMING_STATUS_REQUEST : 04 FF ProgrammingStatus_DCT4 : No Error - 0 (0x00) >> 01260000 : 0174FFFF BB_PROGRAMMING_STATUS_REQUEST : 04 FF ProgrammingStatus_DCT4 : No Error - 0 (0x00) Erasing Done Flashing ImageFile ContinueFlash_DCT4 Complete Write Time Elapse : 00:00:19 FLASH Mode Set to : PHONEMODE_FLASHBUS ProgrammingStatus_DCT4 BB_PROGRAMMING_STATUS_REQUEST : 04 FF -- Progamming status First Byte OK Second Byte OK BB_PERM_DATA_RESTORE_REQ : 18 FF BB_RESTART : 07 FF MCURestart : SUCCESS Making delay between files for 6000ms ImageFile:C:\Program Files\Nokia\Phoenix\Products\rm-524\rm5240_nai05.01ej PhoneType : DCT4 Algorithm : DCT4 ALGORITHM Supported Hardwares : > 2293 Secondary Sending Speed : 100000Hz Algorithm Sending Speed : 6500000Hz Program Sending Speed : 6500000Hz Message Reading Speed : 51000Hz Number of Blocks : 11 Entry Point: 0x00CA Is128k: True Boot Check, Please wait... MCUID Response ------------------------------------- MessageID : 92 msbUPP_ID : 22 lsbUPP_ID : 93 ------------------------------------- Boot OK Boot File: C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_2nd.fia DataLen : 000009D8 Secondary Loader Sent... Boot OK! MCU_CONFIGURATION_RESPONSE_DCT4_MUL3 DCT4 Mess 9F MUL3 Mess 9F TransMode : 03 NumFlash : 02 DevAddr0 : 01 ManuId0 : 0020 - ST DevId0 : 88C0 - Type not in database ExtId0 : 0000 RevId0 : 7321 SectorSize0: 10 Reserved0 : 00 DevAddr1 : 02 ManuId1 : 0000 - Flash DevId1 : 0001 - not used ExtId1 : 0000 RevId1 : 0000 SectorSize1: 00 Reserved1 : 00 ExtBUSC : AD 7E B6 1A 23 10 03 40 C6 05 E4 01 20 A2 65 14 CheckSum : 8E ReceiveConfigurationResponse_DCT4 - FLS1_NO_ERROR SearchForBootstrap_DCT4 : No Error Algo Match File : C:\AdvanceBox Turbo Flasher\Nokia\DCT4_Loader\u3_st_i.fia ALGO SENT.. Perform AUTHENTICATION.. MSID: 8497FA67C031BC9BAB614F2233 DecodedMSID: 843E4EBAE900490DD1A8000000 EncodedFAID: 34203E036EFE26761FBF60D5 Authentication : SUCCESSFULL Erasing address: >> 01750000 : 0178FFFF BB_PROGRAMMING_STATUS_REQUEST : 04 FF ProgrammingStatus_DCT4 : No Error - 0 (0x00) Erasing Done Flashing ImageFile ContinueFlash_DCT4 Complete Write Time Elapse : 00:00:01 FLASH Mode Set to : PHONEMODE_FLASHBUS ProgrammingStatus_DCT4 BB_PROGRAMMING_STATUS_REQUEST : 04 FF -- Progamming status First Byte OK Second Byte OK BB_PERM_DATA_RESTORE_REQ : 18 FF BB_RESTART : 07 FF MCURestart : SUCCESS Time Elapse : 00:04:09 Waiting For Phone to go Online... 5, 4, 3, 2, 1... MCU: V 05.01 23-09-09 RM-524 (c) Nokia IMEI: 356274040507452 Product Serial Number: 701A711AI Product Code : 0578242 Module Code : 0204611 Basic Production Code: 0592600 MCU SW Version : V 05.01 23-09-09 RM-524 (c) Nokia EJ ADSP Version : p V 05.01\n23-09-09\nRM-524\n(c) NMP\nej PPM Version : V 05.01 23-09-09 RM-524 (c) Nokia HW Version : 2006 UEM Version : 1328 UPP Version : 8851 RFIC Version : 0700 DSP Version : ICPR81_09w17_U LCD Version : SDI:BOHAIv92 NT39121 ******** SIMLOCK INFO ******** CONFIG_DATA : 0010100000000000 PROFILE_BITS : 0000000000030002 Asic : 11 Provider : Default Test Operator Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open ST_SIMLOCK_TEST : PASSED ST_LCD_TEST : PASSED SECURITY_CODE : ÿ MASTER_CODE : 7712443743 PHONE_MODE : TEST MODE FACTORY SET TO : Full Factory Set OK FACTORY SET TO : User Data OK FACTORY SET TO : Leave Factory OK FACTORY SET TO : Service Center OK FACTORY SET TO : Software Upgrade OK FACTORY SET TO : Production Tune OK mxkey logs: MXKEY Serial: [FT SCR2000 0] - C0805720 Using device: UFS_USB V2.8 (c) SarasSoft 2007. Driver: UFS2XX, ver: 3.1.5.0 , NTMP ver: 2.4.16.0 Module ver: 1.0.0.17309(31-05-2011), Library ver: 1.0.0.10695(31-05-2011) ASIC ID: 0x2293 [UPPCosto ver: 2.0] SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168 FlashID0: 0020 88C0 [ST M58MWR064FU,64 Mbits] page size: 64 K type: NOR area: 01000000-017FFFFF FlashID1: 0000 0001 [unused/removed] ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514 Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168 Performing Flash Authentication ...OK UEM ID: 00490DD1A3BDA66 ASIC type: 11 UEM Imei: 35627404050745 Flash Imei: 35627404050745 MasterCode: 0676151262 RPL saved to "C:\mobileEx\3.5\data\backup\35627404050745_BA CK.r pl" Phone Type: RM-524 SW Version: V 05.01 23-09-09 RM-524 (c) Nokia Imei plain: 35627404050745-2 Product Code: 0578242 Cellular System: GSM ASIC ID: 0x2293, type: 0 Ppm Id: EJ Language Pack: English,Russian,Ukrainian Failed to read SP data

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware Repair	2	07-23-2013 02:41
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

06-12-2011, 14:48	#2 (permalink)
ripon12 No Life Poster Join Date: Feb 2011 Location: still searching.... Posts: 608 Member: 1507803 Status: Offline Sonork: 100.1605433 Thanks Meter: 112	bro try with universal box

06-12-2011, 15:00	#3 (permalink)
AFZAL ABBASI Freak Poster Join Date: Feb 2009 Location: KSA Posts: 170 Member: 970764 Status: Offline Thanks Meter: 38	change lcd may be u r problem solved......

06-12-2011, 15:48	#4 (permalink)
madni shah No Life Poster Join Date: Jan 2009 Location: ---- Age: 35 Posts: 1,230 Member: 959010 Status: Offline Sonork: 100.1602440 Thanks Meter: 445	UEM changed,upp changed but problem still,no solution http://forum.gsmhosting.com/vbb/f550...-help-1254527/

08-12-2011, 22:57	#6 (permalink)
sachin kumar sh Freak Poster Join Date: Dec 2005 Location: BHARAT Posts: 108 Member: 212545 Status: Offline Sonork: 100.1669621 Thanks Meter: 5	my bro change the UEM write the rpl with the help of MX-key write the pm after that unlocking the sim lock only MX-key

08-13-2011, 00:53	#7 (permalink)
st.nic Freak Poster Join Date: Aug 2008 Location: negros Posts: 137 Member: 844798 Status: Offline Sonork: st.nic Thanks Meter: 11	try to remove sim card BGA i fixed this problem twice in 5030.