5210 contact service and IMEI 000000000000000 - GSM-Forum

osman_gsm · 07-02-2003, 20:42

Hi,

I have a 5210 with this problem : Contact Service
I flash him with 3, 4 versions sw all ok flashing, but Contact Service problem not made
I try to change IMEI sw tell all ok but when read with sw IMEI same 000000000000000

Can some one help me?

benlee · 07-02-2003, 22:44

Hi,

Replace the Flash Ram & flashing again.

Regards

Porter · 07-03-2003, 08:16

before changing anythyng try simple rehot PCB aspesialy COBA

mobileland · 07-04-2003, 03:06

It's just software problem.You two
want's to destroy the man's phone..

BLIDA · 07-04-2003, 08:40

find virgin eeprom and flash it again and write correct imei +update faid and unlock it should work 100%
wbr

Syed · 07-04-2003, 11:48

or simply read full flash from a working phone and write this to your phone... change IMEI and update FAID...
thats all...it is software problem not hardware..

Syed

Platijet · 07-06-2003, 21:11

@syed

this sollution repair the phone for 5-6 days and then....dead

for me twice it was ccont and once flash

.::AkhavanGSM::. · 07-07-2003, 11:06

it is 90% harware.
check cobba.And remeber that if it is software error,May be related to EEP not flash(5110 eep is a seperated component,not a part of flash ic)
Inform us about results

glicos · 07-07-2003, 20:50

try to use eepromtools to verify the contact service fault, before doing anything.

Syed · 07-08-2003, 07:40

if you see COBBA ID as 00 00 00 00 then this is 101% hardware problem.... also if you get the problem repeated then mostly a some drysoldering only...

agpla · 07-17-2003, 22:12

alex911 · 07-20-2003, 09:13

hi,

you don't need to replace the flash/ram of the hone while to phone is responding to flasher. all you need is clean full flash or clean eeprom.
that's it

Luciano · 07-20-2003, 09:38

first of all try to establish the CS message.
use Wintesla and run self test's and see what's fault.

after you now that we can advice...

if you are not doing the repair step by step and jump to guess you can do more damages to phone...

Gadget · 07-20-2003, 14:36

i have a 3310 that has imei 6565656565656.
can using a full flash mend this aswell, like posted here

agpla · 07-20-2003, 14:54

Change the IMEI whit NokTool by Rolis....

Worked for me....

I had Imei 65656565656 and was solved.....

07-02-2003, 20:42	#1 (permalink)
osman_gsm Junior Member Join Date: Jul 2002 Age: 50 Posts: 20 Member: 13657 Status: Offline Thanks Meter: 0	5210 contact service and IMEI 000000000000000 Hi, I have a 5210 with this problem : Contact Service I flash him with 3, 4 versions sw all ok flashing, but Contact Service problem not made I try to change IMEI sw tell all ok but when read with sw IMEI same 000000000000000 Can some one help me?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5310b contact service and imei 12345	خالد الو	HWK	3	04-27-2009 08:31
3110c contact service and imei error	volmax®	MT-BOX	10	04-18-2009 13:11
griffin team rpl contact service and imei find?	accejen	MT-BOX	1	12-04-2007 09:42

07-02-2003, 22:44	#2 (permalink)
benlee Freak Poster Join Date: May 2002 Posts: 116 Member: 11770 Status: Offline Thanks Meter: 326	Hi, Replace the Flash Ram & flashing again. Regards

07-03-2003, 08:16	#3 (permalink)
Porter No Life Poster Join Date: Jan 2003 Location: Ukraine. Lviv Age: 43 Posts: 1,781 Member: 19633 Status: Offline Thanks Meter: 13	before changing anythyng try simple rehot PCB aspesialy COBA

07-04-2003, 03:06	#4 (permalink)
mobileland No Life Poster Join Date: Feb 2003 Location: www.X-SIM.me Age: 45 Posts: 2,424 Member: 22955 Status: Offline Sonork: 67574 - Not use it Thanks Meter: 584	It's just software problem.You two want's to destroy the man's phone..

07-04-2003, 08:40	#5 (permalink)
BLIDA No Life Poster Join Date: Sep 2002 Location: ALGERIA Posts: 1,716 Member: 15439 Status: Offline Sonork: 100.43816 Thanks Meter: 52	find virgin eeprom and flash it again and write correct imei +update faid and unlock it should work 100% wbr

07-04-2003, 11:48	#6 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	or simply read full flash from a working phone and write this to your phone... change IMEI and update FAID... thats all...it is software problem not hardware.. Syed

07-06-2003, 21:11	#7 (permalink)
Platijet No Life Poster Join Date: Apr 2003 Location: Greece Age: 47 Posts: 3,358 Member: 26279 Status: Offline Thanks Meter: 274	@syed this sollution repair the phone for 5-6 days and then....dead for me twice it was ccont and once flash

07-07-2003, 11:06	#8 (permalink)
.::AkhavanGSM::. No Life Poster Join Date: Jun 2002 Location: Iran Age: 47 Posts: 1,082 Member: 12724 Status: Offline Thanks Meter: 30	it is 90% harware. check cobba.And remeber that if it is software error,May be related to EEP not flash(5110 eep is a seperated component,not a part of flash ic) Inform us about results

07-07-2003, 20:50	#9 (permalink)
glicos Freak Poster Join Date: Feb 2003 Location: Philippines Age: 54 Posts: 414 Member: 22588 Status: Offline Thanks Meter: 29	try to use eepromtools to verify the contact service fault, before doing anything.

07-08-2003, 07:40	#10 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	if you see COBBA ID as 00 00 00 00 then this is 101% hardware problem.... also if you get the problem repeated then mostly a some drysoldering only...

07-17-2003, 22:12	#11 (permalink)
agpla Freak Poster Join Date: Apr 2003 Location: RO Age: 39 Posts: 148 Member: 25909 Status: Offline Thanks Meter: 1

07-20-2003, 09:13	#12 (permalink)
alex911 Junior Member Join Date: Jun 2003 Age: 54 Posts: 14 Member: 32888 Status: Offline Thanks Meter: 0	hi, you don't need to replace the flash/ram of the hone while to phone is responding to flasher. all you need is clean full flash or clean eeprom. that's it

07-20-2003, 09:38	#13 (permalink)
Luciano Freak Poster Join Date: Aug 2001 Location: RO Posts: 479 Member: 5992 Status: Offline Thanks Meter: 1	first of all try to establish the CS message. use Wintesla and run self test's and see what's fault. after you now that we can advice... if you are not doing the repair step by step and jump to guess you can do more damages to phone...

07-20-2003, 14:36	#14 (permalink)
Gadget Insane Poster Join Date: Jul 2003 Location: UK Posts: 77 Member: 34966 Status: Offline Thanks Meter: 0	i have a 3310 that has imei 6565656565656. can using a full flash mend this aswell, like posted here

07-20-2003, 14:54	#15 (permalink)
agpla Freak Poster Join Date: Apr 2003 Location: RO Age: 39 Posts: 148 Member: 25909 Status: Offline Thanks Meter: 1	Change the IMEI whit NokTool by Rolis.... Worked for me.... I had Imei 65656565656 and was solved.....